General :: Wireless - Does Not Recognize The Internet Connection
Feb 28, 2011
I have an HP laptop with a wireless connection to my BT router. This works fine,but when I switch to ubuntu I cannot get on line it simply does not recognize the the connection.A friend suggested disabling the internal card and using a usb dongle this works fine on windows but again is not recognized by ubuntu.I do have an Ethernet cable connection which is fine in the office but no good when elsewhere in the house. Any one with experience of this problem?
My wireless internet works fine on Windows but not on Ubuntu 10.10 From researching the problem, the best advice I have found was to install ndiswrapper, locate the .inf file and install it through that. I have done so and that seems to have done nothing. Then I heard that you were supposed to run the command:
Code:
modprobe ndiswrapper
All that did was give me an error message about how that action was prohibited (or some such). I'm wondering if this is possible to fix on Ubuntu or if I will have to find something else. Also, the wireless driver I am trying to use is bcmwl6 which funnily enough seemed to have a package on the boot cd to install it.
That package didn't work and just gave me and error message telling me there was a programming error in it. I'm sorry I wasn't particularly detailed with the messages I was getting, this is because I am currently on Windows and finding those again would mean rebooting and losing this post. I can get them though if they are particularly needed. I know this seems to be a commonish problem but I haven't found a solution (yet) that has worked for me.
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I attempted to download and install Linux XP and the installation appeared to be a success. But after install of course the system reboots. Well after rebooting before opening up the desktop it forces me to set up the domain or something It would not recognize my internet/network connection. My ISP provider doesn't use any type of authentic. My internet connection is automatically configured through my modem. How do I get Linux XP to recognize my internet connection and finish the final process so that I can load into desktop ?? I also had a very similar problem with Linux Ubuntu Studio as well. I installed it and I was able to get into the desktop but still was unable to establish an internet connection.
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
On trying to install Ubuntu 10.10, one PC was fine. I attempted to install it on a Lenovo Q150 using the Ubuntu Live CD, but it did not recognize a network connection. When the same PC is running Windows 7, the network connection is fine (it recognizes my NAS drive also).Has anyone else had this problem/found a solution? I'm sure that someone else has posted this, but a couple of hours' searching revealed nothing.
I have a Dell Inspiron 9300 and I recently installed Fedora 14. The computer has a built in Ethernet card, and I'm not sure about what exactly the card is, but I do know that I have a Wireless USB Netopia IEEE 802.11b (model # SWL-2300U) that worked fine on my XP, but now that I've changed over to Linux I can't seem to find this driver for Linux anywhere!
I would like some help setting up using a wireless connection. I can connect using wired connection, and I have no trouble browsing. I have a strong wireless connection as well; however, when I try to browse I get a server not found error. I did download the necessary drivers. Before that, I didn't have a wireless connection. I was able to connect on this pc before the install, and all other devices still connect using wireless. I have a linksys router.
The one thing that stands out at me is the ip address that it says the wireless connection is using. It says it is 10.42.43.1 I feel like that might be problematic because I'm pretty sure my router only accepts connections with values that are between 192.168.1.100 and 192.168.1.200.
I've been trying to install 11.04 on my 2009 Macbook Pro, but I can't complete the installation because Ubuntu doesn't recognize my wireless connection.
Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
Just re-installed Bodhi. Ran update, dist-update, set up connection and connection still slow or timing out and reporting errors in 'iwconfig'. This is 3rd re-install of this version. Have also tried 3.0 kernel and pae versions of Bodhi. Cannot get this connection up to speed and without errors. Atheros chipset ar9271.
Sorry for weird subject line and opening paragraph. Trying to make it easy to find and browse in case this gets solved and can help someone else. Not being a Linux guru, I can only hope to help others through my mistakes and ignorance.
I followed instructions to update driver listed at Linux Wireless.
In addition to following the directions at Linux Wireless, I also downloaded the GUI Program to install ath9k_htc.
No luck. My connection reports 1M/s and is reporting "invalid misc:" errors in iwconfig.
I'm running Midori browser but apt-get and wget are also downloading slowly.
I'm connecting to a Zyxel 660 series router using WPA/WPA2.
I m trying to get internet connection via wireless on Suse 11.4. Although ifstatus eth1 reports an IP address (and router reports a wireless connection) no Internet access is possible, which seems very strange (including the admin page of the router).
I upgraded to openSUSE 11.4 from 11.3. Under 11.3 64 bits I had a wonderful wireless internet connection. Since the new installation, I do not succeed to get my computer on line. I'm glad that for the time being, I can use my Windows XP SP3 dual boot system.
Here are a few tests I ran :
Code:
Code:
Although I run this command as root, I get the message Encryption key : off
Code:
Code:
Code:
so, this seems to be ok.
But then I want to ping samba.org :
Code:
which gives this result :
What struck me is that apparently both drivers rt2500usb AND rt73usb are loaded. Is that necessary ? What struck me as well is that I can't get my encryption key when issueing the command iwconfig as root: it seems to be off ?
Then when I studied the hardware-info (via YAST), I got also this :
I am new to ubuntu, just installed it a few hours a go. I've managed to get it hooked up to my wireless connection but still the internet doesnt work. What I can do to get it working?
I'm using 10.04 I tried to connect to a free WiFi connection. I had the password for it too. I had been able to access the connection 2 weeks ago with no real trouble. Now, the thing at the top of my screen indicates I'm connected BUT I can't get Firefox to access any sites. I can't download email using Thunderbird. Pretty strange isn't it?
Finally I thought I solved my problem with the help of Dmizer. My networkcard wasn't functioning correctly due to the hardware switch on my laptop. For more information about this check this thread: [URL]
Now I have a new problem, probably caused by the problem above. I have a connection (so the network manager says) but no internet. I checked the network settings by using the ifconfig command in a terminal. This tells me that I have an address of 10.43.42.2 (or similar) which should be something like this 192.168.x.x.
I had already tried to use a command like "ifconfig release" but this didn't work. I know too much windows like but i had to try something. I also had the connection properties checked and changed to my network settings. After i did this I had still the same address (10.43.42.2 or similar).
Unless someone knows what is going on I'd like to know how to refresh of renew my IP address from the DHCP server.
Some information about my hardware and drivers:
NIC vendor: Atheros Communications Inc. NIC chipset: AR2413 (i guess, i do not have my laptop with me at the time of writing) Old driver: ath5k New driver: ath_pci (installed from madwifi)
I have no wireless internet on my 11.04. I can access my wired connection but my wireless doesn't show connections and isnt able to connect to any wireless network in the neighbourhood. (I had this probz too in 9.10 and 10.04) But none of the solutions work now. I already tried to blacklist the blacklist at76c50x_usb
Code: jannes@jannes-DY137A-B14-a540-be:~$ lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0681:001b Siemens Information and Communication Products WLL013 Bus 003 Device 002: ID 046d:08f0 Logitech, Inc. QuickCam Messenger Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Three months ago my daughter went off to college with a new computer. I zapped her old system and successfully installed Ubuntu 9.04 from a CD. Everything worked fine including all the peripherals and the wireless internet connection. I was able to download and update applications without a hitch. Great system and so much cleaner and quicker than Win XP on the old machine. Then the system was shut down and lay idle for three months.When I fired it up a couple of days ago, all seemed normal except I could no longer access the internet even though the wireless network icon showed four or five bars. I first discovered the problem when I tried to update though Update Manager and noticed that 22 identified files could not be fetched. Neither Firefox, Skype nor Goodgle Earth can connect.
The router is a Linksys WRT54G router that connects to the computer through a Linksys WUSB54G USB network adapter. The router serves three other non-Linux computers without a problem, including one using the same model network adapter.I don't have much experience with Ubuntu, but this is some of the information I have been able to generate.
I tried a few of the recommendations found in other sites, but nothing seems to do the job. I am perplexed because everything was great until I shut down the system for three months and then started it up again. I appreciate any assistance and would be happy to provide additional information as requested.
I had Fedora 7 which works fine with my PCI card Linksys WMP54G-EU (00:0b.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)).
It ran with ndiswrapper.1.51.
Yesterday I installed the live-CD Fedora 10 on a new partition in another hard drive and so I have Fedora 10 but WITHOUT Internet connection.
I tried to install Ndiswrapper but the 'make' command doesn't exist in my Fedora 10 !
What are all the things I need to download from Internet to ensure the several commands like 'make uninstall', 'make', 'make install'... and to ensure installing Ndiswrapper ?
I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.
Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.
I've been using this network forever With windows and I can't figure out how to connect to it now with ubuntu...I have a build-in wireless card and I know the name/password of the connection, but my computer cannot seem to locate it. I've looked through guides and none of them work..
I have recently installed Ubuntu 8.04 LTS Server Edition, with no GUI. I can't connect to internet, and therefore I can't use commands like "apt-get update" I do not even know how to configure this server yet. I need my server to connect to Internet through my wireless card (I have no cable connexion for now).
