I have had some experience with ubuntu on my Lenovo y730. I was told to run debian on my dell 2650 for the compatibility, All I want is to be able to run either my Belkin pre n f5d8010 pcmcia card or a linksys usb wifi.
View 1 RepliesI have two Dell PowerEdge 2650 servers. One is a dual Xeon 3GHz with 4GB of RAM (4 x 1GB sticks). The other is a single Xeon 2.4GHz with 3GB of RAM (2 x 512MB and 2 x 1Gb sticks).
Both are running 32 bit CentOS 5.3. Both are running the same kernel (vmlinuz-2.6.18-164.el5). I've even diff'ed the two kernels to ensure that they are in fact identical. The only parameters being passed to the kernel via the grub config are "ro root=/dev/sda2"
The BIOS shows 4GB detected on the 4GB server and 3Gb detected on the 3GB server on boot.
Dell OpenManage for the 4GB server shows "Total Installed Capacity 4096 MB, Available to the OS 3804 MB", as I would expect. However, OpenManage for the 3GB server shows "Total Installed Capacity 3072 MB, Available to the OS 1011 MB". (i.e. it is only seeing the first 1Gb of memory).
cat /proc/meminfo confirms the above; the 4GB server shows "MemTotal: 3895980 kB", but the 3GB server shows "MemTotal: 1035024 kB"
I installed the lshw utility, and on the 3GB server it shows all 4 memory sticks, the full 3GB:
*-memory
description: System Memory
physical id: 1000
slot: System board or motherboard
[Code].....
I am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies View RelatedI have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies View RelatedI am new to ubuntu and am trying to connect to the Internet with a usb wireless from belkin. Attached is the wireless_setup.txt.
View 2 Replies View RelatedTrying to add wireless adapter to my fedora 13 system. Belkin f5d7050 raxwn450th v4000. Located zydas zd1211 driver on source forge. Downloaded and installed it
Code:
showed my dsl wireless adapter
system - preferences - network connections did not show it
I rebooted - now
Code:
shows my dsl adapter, and lsusb says
Code:
But it not show up on system - preferences - network connections
Would have prefered to install it via yum but dont know the magic words to get yum to find it.
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
I'm pretty new to Linux, but have had a bit of functional tutoring. i'm triple booting my old Dimension 8400. Have been running with Jackalope and XP for some time now and wanted to install Lynx and get a good handle on it before i completely wipe my other machine (Win7/Jackalope) and install it there.
Installed Lynx from a USB stick and all seems well, it recognises the UBS wireless and all available connections but just sits and spins on the password login and never connects...hmmm. I have tried all possible combinations of rebooting with the USB connected/disconnected/connecting after... to no avail.
The wireless seems to "work out of the box" just as seamlessly as it did for Jackalope, all the steps are similar, it just never connects.
Actually, the title I was looking for was Belkin Gigabit Ethernet ExpressCard not seen on Dell Precision M6500 with CentOS 5.5 _when system boots with no link on this card_. When I boot this system with a cable connected to the Ethernet port, the card shows up (dmesg, lspci 0e:00.0 and ifconfig). When I boot it with nothing connected, it's like it doesn't exist. I know I could make it work with a loopback plugged in at all times, but am looking for a more graceful solution. Here are messages logs from when it's recognized
Jul 19 15:14:23 mss kernel: sky2 driver version 1.22
Jul 19 15:14:23 mss kernel: sky2 0000:0e:00.0: v1.22 addr 0xf6afc000 irq 193 Yukon-2 EC rev 2
Jul 19 15:14:23 mss kernel: sky2 eth0: addr 00:00:5a:11:45:5b
[code]...
Update: Should have been a little clearer - this card has the Marvell Yukon chipset. I'm trying to identify the part number without ripping out the casing.
I use openSUSE 11.3 with KDE 4.4 and I have a Belkin Share Wireless USB Adapter (F7D2101 v1) , I attached the adapter and rebooted the system, it does not work. Can someone help me configure?
I attached the adapter and the system says:
dmesg | tail
[ 1184.799076] usb 1-1: USB disconnect, address 2
[ 2003.060031] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 2003.194525] usb 1-1: New USB device found, idVendor=050d, idProduct=845a
[ 2003.194531] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2003.194535] usb 1-1: Product: Connect Wireless USB Adapter
[Code]...
Following sticky Thread: Getting Your Wireless to Work - Everything seems okay through step VI, getting an IP address through DHCP. It appears that authorization is failing. Results from steps in sticky:
Note: This is a new installation of openSUSE on fresh (formatted) workstation
Step II What device? Hardware info from YAST - Wireless LANUSB2.0 WLAN (wlan0)Kernel Driver: zd1211rw lsusb reports "Bus 001 Device 002: ID 050d:705c Belkin Components F5D7050 Wireless G Adapter v4000 [Zydas ZD1211B]"
Step III External firmware? I downloaded the b43 packages, installed as normal and used etc/SysConfig editor to add b43 to modules loaded on boot.
dmesg|grep firmware
[ 22.468807] zd1211rw 1-3:1.0: firmware version 4725
Ran the following check from another thread
rfkill list all
0: phy0: Wireless LAN
[code]....
I'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
configure my Belkin Wireless USB adapter(F7D2101)? I attached the adapter and rebooted the system. I used the hardware info and it is listed but no drivers.
View 4 Replies View RelatedI have a Belkin F5D8055au USB wireless adapter which I can't configure in YAST. I have downloaded the RT2870sta driver from RALink and compiled it - seemed to be ok. Modprobe loads it ok. Some info:
[Code]...
When I open network settings in YAST my wired (ethernet) card shows up but not the USB. If I manually add a wireless card, I can't select the kernel module from the drop down list - there is nothing in it. At that point I abort YAST. So, how do I convince YAST that there really is a USB wireless adapter connected?
Code:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI have just installed Slackware 13 on my Dell but the BT LED is not lighted when I start machine.
I run:
# hciconfig -a
But no result returns
I search many times about this problem but seem not find any solution.
I'm looking at buying one of the above cards, and was wondering if anyone knew if they worked in master mode (e.g. as an access point). According to the Aircrack-ng site, they support packet injection and monitor mode. Is master mode support solely up to the driver used with the card, or does the card have to physically support it?
View 2 Replies View Relatedim downloading ubuntu for m desktop...my question is how do i listin to my music..and can i use m belkin usb wireless adapter??? does ubuntu have drivers for such things?
View 4 Replies View RelatedI just moved to Linux, and I really need some help for my wireless adapter. What I am using is Belkin F6D4050 v2. I think I should use the rt2870sta driver. After 2 days working, my laptop can recognize the wireless adapter now. But it can not find any wireless connections. There are some information. Hope they are useful.
[Code]...
I have a Belkin G Wireless USB Network Adapter that I cannot get working for the life of me...USB adapter hardware: F5D7050 Ver. 3136 (v3000) Below are ouputs after a fresh install... Then I tried to install the newest drivers from ralink [URL] I blacklisted the current drivers and installed these and everything looked the same as before. Even if i blacklist the 3 drivers
rt2500usb
rt2x00lib
rt2x00usb
They are still loading at boot. Is there any way to make this work. I would try ndiswrapper but even when blacklisting those above, they are still loading.
System: HP G50 Laptop with on-board atheros card that used to work, but now even has issues in windows
Code:
$ lspci
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Code:
$ lsusb
Code:
Bus 002 Device 002: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573] With a fresh F14 install, I plug the device in, does not light up or work, yet shows in network manager
Wireless Network (Atheros 5001 Wireless Network Adapter)
wireless is disabled
Wireless Network (Belkin 54g USB Network Adapter)
wireless is disabled
I cannot click on either of these. So I check dmesg...
Code:
$ dmesg
Code:
[ 736.739057] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 737.026971] usb 2-3: New USB device found, idVendor=050d, idProduct=705a
[ 737.026978] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code].....
I have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
View 4 Replies View RelatedCannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
I have a Belkin F5D6050 adapter, which (despite being only 11b) was working better than my 11n adapter on 11.1 [The 11n stopped working today after I ran an upgrade; I have got it working - in a fashion under 11.3 - see RTL819SU not working with ifup (needs ifup-dhcp first)] I can't connect to my AP. The significant output from dmesg appears to be:
Code:
[19991.327361] wlan1: authenticate with 1c:af:f7:26:01:bc (try 1)
[19991.524037] wlan1: authenticate with 1c:af:f7:26:01:bc (try 2)
[19991.724034] wlan1: authenticate with 1c:af:f7:26:01:bc (try 3)
[19991.924031] wlan1: authentication with 1c:af:f7:26:01:bc timed out
FYI the info from
[Code]...
I've got an old IBM Thinkpad T41 that I just play around with Ubuntu on. The internal Wireless card is broken, so I bought a Belkin F5D8013 PCMCIA Wireless N card a while ago. It worked fine with Ubuntu 8.04-9.10, but it will not work with 10.04. It sees the networks just fine and will let me type in the network password, but it will not connect. Everything else in my house connects without a hitch, so I know it is Ubuntu causing the problem.
View 1 Replies View RelatedI have been trying to get my Belkin FD8233-4v3 wireless-n usb adapter to work in Ubuntu since 8.04. It has worked with ndiswrapper under 32-bit (never the 64-bit) versions in the past, but has never been able to be configured directly. It uses the Ralink RT2870 chipset, but cannot seem to be configured using the drivers from the Ralink website.
With Ubuntu 10.04 64-Bit, everything has changed. I have high hopes that this adapter may finally work correctly and without ndiswrapper. As soon as I first booted 10.04, for the first time ever, Ubuntu recognized the IF automatically, reported my wireless router, allowed me to enter my 128-bit WEP hex code and tried to connect up. It is failing miserably, but it is making a valiant effort.
I was dual booting with XP and Jackalope using a Belkin N wireless USB. The install on Jackalope was simple, a plug and play type situation, plugged it in and it worked. A few days ago though, i wiped the whole computer and installed Lynx. To my dismay, even though Lynx sees the wireless, sees the available signals, lets me input my password... it fails to connect. It just spins and spins and eventually asks for my password again...
I'm still pretty new to Ubuntu, and Linux in general. I updated, and pretty sure i retrieved 3rd party drivers for the video card properly (using a cable connection), but thats pretty close to where my "expertise" ends.