Fedora Installation :: Triple Boot FUBAR - PC Only Loads Win7
May 1, 2010
I had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies
ADVERTISEMENT
Jan 27, 2010
I am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies
View Related
Nov 28, 2010
I install Win7 firstthen I install Ubuntu in a separate partition it run ok with grublast i install fedora in a separate partition it run with 2 choice win7 and fedoraI use hiren boot cd to boot with mini linux and run grub 2.0 application on it.i set up and run i only use Win7 and booot linux error.
View 2 Replies
View Related
Jun 6, 2010
Here is my dilemma at first grub loads and I have this options:
1.ubuntu 9.04 with a new kernal (update via-- system update)
2.ubuntu 9.04 with old kernal
3.recovery
4.......
5.windows.
And inside windows there is another boot screen for
1.win-7
2.vista
Now I want to remove win-7 and install 10.04 in its place I want the safe/proper procedure to do it if there is already a thread like this then direct me there as I searched and did not get it.
View 6 Replies
View Related
Jan 19, 2010
I've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
View 5 Replies
View Related
Feb 3, 2010
I need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
View 1 Replies
View Related
Jun 22, 2010
So I just bought a 500GB HDD, now I want to use these three OS on my PC. I know how to dual-boot XP with 7, but i'm new to linux. BTW, would i need 3 partitions for these 3 Operating systems (1 for each) or can i install Ubuntu in one of those two windows partitions? (eg. C: XP&ubuntu, D: 7). What would be the easiest & fastest to do? And how to do it?
View 4 Replies
View Related
Feb 5, 2010
I am using Mac Pro with MacOS + Vista 32bit +Ubuntu installed. Using rEFIT with lilo bootloader. I want remove Vista 32bit and install 64bit Windows 7 instead. I am afraid of trying to install Win7, because it may delete bootloader. How can I remove Vista and do a clean install of Win7 to my Mac Pro without losing ubuntu and MacOs?
View 1 Replies
View Related
Mar 12, 2011
I've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
View 2 Replies
View Related
Mar 11, 2009
I have a dual boot with vista on disk 0 and ubuntu on disk1. I just installed a disk 2 that I would like to use to try out other distros. Ubuntu is the only linux experience I have had. I'm really not very good at all of this, so my questions before I start loading another distro are:
1. Does Fedora use GRUB as its installer?
2. When I installed ubuntu on disk 1 (sdb1), the install was very simple. I chose sdb1 for the install, it loaded it, and when it was done I simply had the choice of which drive to boot into. Will installing Fedora on disk 2 (sdc1) be just as simple, or will I encounter steps I must take to make it so that I have a choice of which disk/OS to boot into?
View 3 Replies
View Related
Oct 2, 2009
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
View 1 Replies
View Related
May 25, 2010
i am using windows7 and ubuntu 10.04 in my system and dual booting... now i wanna install fedora 13 along with it ans make it triple boot... so can one pls help me in this process as i havent installed fedora before and i wanna be safe and dont want to loose my Grub or windows bootloader in this process
View 10 Replies
View Related
Feb 1, 2009
I have triple boot pc (xp, ubuntu, and fedora), installed in that order. xp and ubuntu seem to be stable. i have had to pull the power cord 3 or 4 times while booted in fedora. i noticed the last 2 times i can still move the mouse around, but can't get it to open anything. the keyboard is locked up, can't alt-f1 or f2 or anything to get console. can't get it to do anything, other than watch the mouse tail move around (weird).
i installed a new power supply (and at least i now have a power switch - the old one never had one), but that didn't fix the lock up problem. i haven't ran yum update since the fc10 live cd gnome install. was planning on doing that later.. not sure how long it will stay up to download all the 300 or so updates. right now the only thing open is a terminal (can't type in it).. what should i look at to fix this lock up problem?
View 6 Replies
View Related
Mar 25, 2009
I now have a triple boot on triple drives with Vista on sda, Ubuntu on sdb, and PCLinuxOS on sdc.When I installed PCLinuxOS on sdc, I installed the bootloader in the first sector of partition 1 of sdc so that I could keep using the Grub bootloader that installed with Ubuntu.Everything is working fine at the moment.I now want install Fedora 10 on sdc for experimentation. I have used gparted to create another partition on sdc to install Fedora 10, so my question is 'What and where exactly should I put in the /boot/grub/menu.lst of my original bootloader to get to Fedora?'
View 14 Replies
View Related
May 29, 2010
I am triple booting
Windows xp
UBUNTU 10.04
Fedora 13
Everything works fine, the setup went very well. But I got to thinking (A dangerous thing for me). In Ubuntu I am using separate partitions for / (root) and /home. I was wondering, during install of Fedora, could I use the separate partition I am using now for both root and /home for just / (root) and use the Ubuntu /home partition for Fedora (set the mount point for /home to the same partition as I did for Ubuntu and not format the drive)? This would allow me to seamlessly use the /home partition and not require duplication of files. I can mount the Ubuntu /home dir while in Fedora.I can share the /home partition with two different installs of Ubuntu (been there).
View 1 Replies
View Related
Jun 8, 2010
I need some help creating a triple boot system, I have already installed XP and W7, now I am installing Fedora 12 (this is for work so unfortunately it has to be like that). Now the problem is that I want it to show all the partitions in GRUB. Right now it works by going to GRUB first, when selecting Windows it jumps to the Win7 boot manager.
I tried to have them all in one but it seems like the addresses I used in GRUB did not work cause it keeps directing me to the Win7 BM. BTW I am using a single drive with 3 different logical partitions.
View 3 Replies
View Related
Jan 14, 2010
I had Win7 installed on my Laptop and wanted to set up a triple boot with Fedora 12 and Mint 8.So I installed Fedora 12 and it worked loading grub and offering Win7 and Fedora as choices.Then I installed Mint hoping for the Grub2 to recognise Fedora and set up the triple boot but it didn't and I can now only boot into Win7 or Mint.sudo update-grub doesn't help.How can I configure grub2 to offer me all three OSs?
View 1 Replies
View Related
Mar 7, 2009
I have an Intel DG33TL MB, Intel Core 2 Quad Q9650, 8GB SuperTalent DDR2-800, and 4 Seagate 500GB hard disks. The disks are connected to a 3Ware 9650SE-4LPML and set for RAID0. I partitioned the drive in the following manner: 900GB for XP-Pro x64 (first install), 100 GB XP-Pro (installed second), and the remaining for FC10. After installing FC10 x64 using downloaded DVD .iso I am getting the following error on reboot:
Code:
Reading all physical volumes. This may take a while...
Volume group "VolGroup00" not found.
[code]....
View 1 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Apr 23, 2011
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies
View Related
Dec 6, 2010
I've got a dual boot Ubuntu/XP system (two separate HDs) that I've really hosed up and Here's the sad tale:
1. When rebooting recently, the bios prompted me to confirm a change to my system configuration... the query you get when you add a new HD, for example. I didn't add anything to the system, but stupidly hit F1 to apply the changes in my haste.
2. I could then boot into Ubuntu, but not Windows. When I tried the latter, I got the "NTLDR is missing" message.
3. Based on reading some online help tips, I booted into the recovery console and tried fixboot.
4. Now, I can't boot into either system! I get something like this when I choose Ubuntu from the Grub menu:
[Code]....
View 9 Replies
View Related
Feb 7, 2010
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies
View Related
Mar 7, 2010
I have read a number of threads relating to the bootmgr missing issue but I can't seem to apply the fixes to my specific situation, any assistance is most welcome; my details below. I have two HDDs
1 x IDE HDD running Fedora 12 which is allowing me to write this,
1 x SATA HDD which has win7 premium 64-bit, and up until the Fedora 12 instal, was the only OS.
Grub gives me two options for boot, they are: Fedora Other When I select 'Other' I get hte message :BOOTMGR MISSING My assumption is WIn7 located on my SATA HDD = Other what I might do to allow Win7 to boot.
[Code]....
View 3 Replies
View Related
May 4, 2010
On this dual-boot machine I have Ubuntu installed on hd0 (/dev/sda), Windows 7 is installed on hd1 (/dev/sdb). The mbr for Ubuntu is on /dev/sda1. After installing Windows I went through the steps to reinstall grub2 on /dev/sda1, but Windows 7 kept loading. So I went ahead and upgraded to 10.04, expecting the upgrade to overwrite the correct MBR, but this didn't work either. When I was looking at the advanced options in the 10.04 installation I noticed Windows 7 had an MBR in /dev/sdb2. If I installed grub2 to this partition should it overwrite 7's bootloader and allow me to load from grub2? Or is there something else I should be looking for to resolve this problem?
View 2 Replies
View Related
Mar 7, 2011
As a big supporter of Ubuntu, after installing Ubuntu 10.10 on my mums laptop i decided to also install it on my sisters Acer Aspire one netbook.
The specific netbook had pre-installed Win7 starter. Everything went really smooth with the installation with ubuntu 10.10, Grub menu was also loading pretty well but when i chose to load on windows it loads the recovery partition of the hard drive.
The issue is that the netbook, like most netbooks and laptops, has a hidden partition which is used to recover Windows on the system. My Grub2 loader added this partition as an option to load windows with result me not be able to boot on windows ...well i do can load but it loads the recovery of windows.
View 9 Replies
View Related
Mar 11, 2010
I'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
View 14 Replies
View Related
Oct 5, 2010
I installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?
View 3 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Sep 10, 2010
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
