Triple booting. Windows 7 Evaluation, Xubuntu 9.10 and I just installed Absolute. Xubuntu uses Grub 2. I was going to do three things. Install Lilo to Absolutes /boot, go inot Xubuntu and reinstall Grub 2 to /boot and then just install GAG boot loader to load all three. Instead I was distracted and installed Lilo to the MBR by accident, which overwrote GRUB 2.
I can boot into Absolute fine and Windows 7 fine but the problem I am having is with Grub 2. The Xubuntu Live CD is not working for some reason, I mean it won't boot. I downloaded it twice and burnt it to disc both times. I am not sure why at this point.
So how do I add Xubuntu 9.10 to Lilo. If I try and do it manually or any other way it starts to boot Absolute instead and then freezes, even though I am pointing it to my Xubuntu partition. I am leaving something out. It has been a long time since I used Lilo and even then I was just as clueless.
I'm using Xubuntu 11.04. I used to use two keyboard layouts, English and German. I switched between the two using the "Keyboard Layouts" XFCE panel item. And all was good. But I recently tried to add Russian to the options, and then things went awry. When I click on the keyboard layout, a dropdown box opens with the three options, but whenever I click on Russian, the icon doesn't change and neither does the keyboard layout. German works fine. When I deleted German from the options, I was able to switch to the Russian flag, but the layout switched to German. No matter how much I fiddle with it, I can never get a Russian layout. Perhaps I'm missing something required for Cyrillic characters?
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
I'm fairly new to linux, and a few days ago, as I was updating my system, I got the "EBDA is big ; kernel setup stack overlaps LILO second stage" error after reboot. I use a 3- boot, ( Win XP / Debian / Debian) and Windows XP works fine, but I can't launch any of the Debian. I googled the message, and I found this link : [URL]
The only problem problem is that when I try to chroot, I got another message, "chroot: failed to run command `/bin/bash': No such file or directory" I googled this message too, but found no relevant answers. I am now using a knoppix usb drive to try to repair the lilo, but I ran out of ideas ...
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager) xfce4 xfce4-goodies xubuntu-default-settings bcmwl-kernel-source aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code: http://ubuntuforums.org/showthread.php?t=1155961 post regarding a "Ubuntu-Desktop-Minimal"-type system.
I work in a very restrictive environment and I want to use linux on my work laptop (currently running Windows XP prof). I am planning to install linux in a dual boot mode but I dont want to install grub/lilo or any other boot loader. i cannot even modify Windows bootloader to boot into linux partition.
Is there a way I can boot into linux partition without installing new boot loader or modifying the current windows boot loader? Any boot CD etc available that can boot into linux partition from my laptops HDD?
I attempted to install slackware 13 on my laptop and was moderately successful. However in the process of attempting to configure it I appear to have messed something up. After reading about the problems I'm having I decided it would probably be easier to remove the current installation and start over.
I am now trying to install fedora from the dvd, but for some reason the computer will not boot the dvd. I have set the bios to boot from the drive first, and have tried burning the dvd twice, but every time the dvd spins up and shortly thereafter the computer loads lilo. Have I simply burned the dvd wrong twice? I used disk manager on mac os x and the disc reads just fine on the mac that burned it, but still no luck booting.
I have slackware one one partition with lilo. Today I've installed Windows 7 on another partition and now I have to fix lilo. How can I do that? Can I reinstall it from the slackdvd ?
Old Setup: I HAD Ubuntu 10.04 (Fresh Install) and Vista. These were booted using GRUB as installed by Ubuntu.
New Setup: I have added Slackware. This has replaced Grub with LILO.
Problem: I have setup liloconfig so recognize each OS. Vista works great, so does Slackware. However, when I select Ubuntu: "Ubuntu is in Low Graphics Mode". Followed by a system crash.
Question: Ideally id like to simply stick with LILO. Is there a simple way to achieve this?
Note: some, on other sites, have suggested installing GRUB from Ubuntu LIVECD, however I am concerned, since I have no boot disk for my Vista that I might make it impossible to boot Vista if a GRUB problem is encountered. So ideally, id like to simply figure out how to work with LILO since it already works with Slackware, and Vista.
I wanted to put password in lilo.conf file. I added this line but doesn't seem to work out Code: password=vickey. I also did Code: lilo -v Is there any thing missing
since ms dos wasn't meant to be booted from cd (it was used from floppy) and i have tried buring the contents of every ms dos floppy to a cd and no dice i am guessing that it needs a bootloader so i can boot up the setup wizard
before anyone suggests that this thread has nothing to do with linux i will just point out that this thread is asking about grub and that is a linux catagorie
I have a SATA boot disk with LILO installed. This disk is kinda like a recovery disk in that its supposed to boot up on any x86 PC. I'm however having trouble getting it to boot on a HP Probook laptop. I get the LILO 99 99 99 ... problem upon bootup.
I've already specified the linear option in my lilo.conf, which according to the LILO error codes might fix the problem but didn't.
Quote:
0x99: Invalid Second Stage
Mismatch between drive and BIOS geometry, or a bad map file. Some evidence that LINEAR needs to be set on the disk (see LiloNotes)
I've tried specifying the lba32 option instead, but get the same problem.
I've tried the solutions at this LILO Error Codes wiki, i.e. lilo -g and lilo -M /dev/sda
Neither solution worked.
Does anyone know how to get this working? Or recommend another BIOS independent boot loader? I was using nuni in the past for my IDE version, but nuni doesn't support SATA drives.
fyi I'm booting up the disk and running LILO on another laptop that boots it up, before plugging it into the Probook to test.
A few years ago I built a small Slackware system and, for storage, I used using a 2Gb Compact Flash card plugged into the primary IDE interface. Initially, I made a bootable CD rom, booted the new system from that, copied the file system to the CF card and then ran LILO to install a boot sector on the CF 'disk' /dev/hda. That all worked well enough.
The only trouble is that the CF card, being an early one, is rather slow and so I've just bought an Innodisk 2Gb Disk-on-Module which ought to be much faster. I have plugged that into the secondary IDE interface, I've run cfdisk to make a partition, formatted it using mkreiserfs and copied all of the contents of the CF card on /dev/hda to the new device on /dev/hdc. So far, so good. But...Now I need to run LILO from the existing CF card in /dev/hda to put a boot sector on the new /dev/hdc. Then I want to move the new device from /dev/hdc and put it in /dev/hda once it's bootable.
I'm stuck to know how to configure LILO to install a new boot sector on /dev/hdc. I don't appear to be able to make LILO understand what I'm trying to do. If I change the line 'boot = /dev/hda' in lilo.conf to 'boot = /dev/hdc', LILO aborts with an error message.
Here's the set up. 1. Got an EXISTING LILO... VL 5.8 (/dev/hdc3) 2. Installed VL6.0 and installed its own lilo on Boot sector (/dev/hdc13) 3. Everytime I choose VL6.0 in my existing LILO (/dev/hdc3) it still goes to VL6.0's LILO. The question is, how can I remove the VL6.0 so if i choose this on my existing lILO. It will just boot straight.
VL6.0 LILO: root:# cat /etc/lilo.conf # LILO configuration file # generated by 'liloconfig' # Start LILO global section boot = /dev/hdc13 #default = linux #compact #prompt #timeout = 0 .....
Im planning on installing a beta of my favorite distro to /dev/hdb from a mounted iso on an /dev/hda partition.Im not exactly a newbie, but i cant say i have ever done this before. Anyone aware of any issues i might encounter? Is lilo ok booting from one drive to another? Is it ok to just install lilo on the mbr of /dev/hda to boot a distro on /dev/hdb?
I have edited /etc/lilo.conf file and changed timeout setting to 30 (in tenth of seconds so 3 seconds) but when I reboot old value - 2 minutes is displayed.Is anything else I need to change?
I have to computers: 'A' (linux) and 'B' (windos). On 'A' I have a linux system that i copy over to a movable disk on which i install the lilo bootloader. Now when I move the disk to 'B' I am able to boot into the new linux system, however I would like to have an item in the lilo boot menu from which I can boot the windows system on 'B' also. And now the tricky part: I would like to create this item when the disk is still on 'A' where windows is not present.
I have tried using "disk = /dev/hda1 inaccessible" without any luck.Is it possible to "cheat" lilo into adding an item pointing to a disk that is not present on your system ?
Just installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section
Code:
# LILO configuration file # Windows bootable partition config begins other = /dev/sda2
[code]....
I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
I'm receiving the following error message when running LILO under SystemRescueCD after installing Slackware 12.2 (the slackware setup hung when installing LILO so I am trying to install manually - I have re-run setup, including formatting all drives again):FATAL: Trying to map files from unnamed device 0x0010 (NFS/Raid mirror down?)Let me know if any more information is necessary and thank you in advance for any help you can provide.
I've run Debian on my laptop for quite some time now with no problems. I installed Slack to a new partition created in the free space of my hard drive, and I thik this was my mistake: I let Slack automatically configure the MBR with lilo (can't remember - I should stop operating on the MBR at 4 AM.) Now Slack runs just fine, but upon bootup I would like to be able to boot either Debian or Slack, but instead I just have a Slack splash and the only option is to press enter to boot Slack.
Code:
I believe sda1 is the root directory of my Debian install.
Code:
In the above table, sda10 is the swap I created for Slack and sda3 is the root directory for Slack. All other partitions were there before (my initial Debian install).
Thus my partitions are apparently intact and visible by the MBR (is it correct that the MBR holds the list of partitions on a disk?) but for some reason I don't have the option to boot Debian at all - just Slack.
I have a feeling this is a LILO/GRUB issue, but I don't know where to start.
EDIT: more poking around seems to reveal that it is the configuration of LILO that is the problem. Observe the following output:
I have one distro installed, LILO as the boot loader, and i wonder if it's possible to duplicate the lilo entries with an option which executes some script or command during, or after the boot.Actually, i installed a Slackware + autolaunching virtual machine, but i have two VM, so i need to autolaunch one of them. May i choose it from the very beginning ?
However, when trying to launch gpsim by typing gpsim on the command line, does not launch a GUI. It has been a long time since using gpsim/linux, but I am sure I remember gpsim having a GUI.
I'm try to install XUbuntu 10.10 (AMD64) on a Pc, when I set the language, and press Enter on "Try XUbuntu without installing", appears the Xubuntu logos and remain fixed for many hours without giving error... same problem with Ubuntu and Kubuntu.
I try to set acpi=off and noapic but i don't resolved the problem..
I obtained this old tower from a relative, and she gave me the OS disk, but it came with two, "xubuntu 6.04" and "kubuntu 7.10". she thinks it xubuntu, but isnt really sure, but im going to say it is for now, back to the problem, when i boot up the computer it comes to a screen that looks like this.Type the password and -- press <ENTER> to leave password security enabled.-- press <CTRL><ENTER> to disable password security.Enter password:
the screen is still on but it's like the computer is going idle or something, It makes watching tv shows/movies pretty hard. I have to constantly keep moving the mouse. I have a pentium 4 with about 600 megs of ram. Latest version of Xubuntu.I went into screensaver options and power management options. It's set to two hours before the screensaver comes on, and never to put the screen idle but the screen seems to do it every 20-30 minutes.I'm not entirely sure where to look now, i don't think there could be anything wrong with the hardware, otherwise moving the mouse wouldn't make the screen come back on.
I have a simple Xubuntu server at my house that I connected an extra external hard drive too. What I would like to do is setup a backup system for my computers to backup to this hard drive. How would I go about setting up the drive to be shared on Xubuntu? I would prefer commands as I use PuTTY to manage the server.
