General :: AOC Monitor Driver / Input Not Support

Mar 13, 2011

Running Ubuntu Lucid Lynx here. Got a LCD AOC monitor. Model e943Fws. Starts OK until logging screen. As soon as i try to log into my account a "input not support" floats around the screen. Are there drivers i should install? Anybody knows this LED monitor..?

View 5 Replies


ADVERTISEMENT

General :: Input Not Supported Message When Monitor Is Powered Off Then Back On?

Mar 27, 2010

I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time).

Specs:
Acer X203w monitor
Radeon 9600 Pro Video card
Linux Mint 8 (Helena)
Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor)
Refresh Rate 60hz

[Code]...

I just had it happen again. I tried unplugging the DVI cable from the back of the computer and then plugging it back in. The monitor then displayed the desktop properly. I'm not sure if that makes a difference or not in what I may need to change settings-wise.

View 1 Replies View Related

General :: Dell E6400 Dual Monitor Support

Apr 6, 2010

I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?

View 2 Replies View Related

Server :: Driver Support - QME2572 - Qlogic - Card Became Support By The Kernel

Jul 10, 2011

I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.

View 3 Replies View Related

General :: Nvidia To Drop Support For The 'nv' Driver?

Mar 27, 2010

It would appear Nvidia are to drop support for the 'nv' driver,recommending using the Vesa driver instead until you install their proprietary driver.Read the article here:

View 14 Replies View Related

General :: Driver Support For HP Pavilion Dm1-2020eo?

Sep 21, 2010

First of all, I have not tried to install anything yet, just doing some research. I recently bought a HP notebook with the intention of installing Linux (I was thinking Ubuntu?) on it, and in my ignorance I assumed that driver support for Linux wouldn't be a problem. Alas, I have some difficulties finding out how to proceed with the installation.

The laptop I bought is a HP Pavilion dm1-2020eo, however it seems it is a region specific model, as I couldn't find it on HP's UK/US sites. Here is a link to the Norwegian description; I am sure you can figure out what the specifications are (don't know if they are relevant at all, though, heh).I couldn't find the model in this list, Windows drivers can be found here. I realise this whole post is a mess, however I hope someone is able point me in the right direction. (On a side note, does anyone know a good guide for building a boot disc/USB stick so I can customize the distro with drivers, partition tools etc?)

View 6 Replies View Related

General :: HDMI Support In Driver Code?

Nov 10, 2010

I want to know whether by default Linux supports HDMI? If yes, where can I find HDMI support in Linux driver code?

View 2 Replies View Related

General :: I2C Driver Support For Intel QM57?

Nov 3, 2010

Does Linux I2C driver support Intel QM57 chipset?

View 2 Replies View Related

CentOS 5 :: How To Get X264 To Work With Lavf Input Support

Nov 23, 2010

My system is CentOS 5.5 x86_32, and I am currently trying to get the x264 video encoder to work and to read libav* input, like elementary H.264 streams. All the prebuilt x264 binaries seem to come without lavf and/or ffms support, and I was unable to build ffmpeg/ffmpegsource on my system. So these x264 versions only support RAW YUV 4:2:0 input, which is of no use to me. I would like to use the x264 binary itself, as it seems that ffmpeg+libx264 does not have option mappings for all the options I could give to x264 directly.

Is there any pre-built x264, that supports lavf/libavcodec for reading H.264 input? Or is there a good, working guide on how to build that on CentOS 5? When trying to build latest ffmpeg (trying to get ffms/lavf dependencies on my system), it tells me, that my "pkg-config" is too old, and that I should set FFMPEG_CFLAGS and FFMPEG_LIBS to work around the issue. No idea what I should do here.

Then, when trying latest ffmpegsource (again, to get the ffms/lavf deps satisfied), it tells me I do not have libx264. Maybe here my version is too old or something. I installed libx264_98, maybe wrong version.

Ah, the output of x264's configure script looks like this:

Platform: X86
System: LINUX
asm: yes
avs: no

[Code].....

View 1 Replies View Related

General :: DELL Monitor With In-built Camera For OS - Driver ?

Jan 24, 2010

I am planning on buying a DELL Monitor for my desktop. Now, I would like to have one which has an in-built camera. Also, my operating system is going to be Linux. Will I have any driver related issues for monitor as well as for the in-built camera.

View 1 Replies View Related

OpenSUSE Hardware :: Bluetooth Device Does Not Support Input Service

Jan 6, 2011

I have a bluetooth usb dongle which I cannot get to work. I start kbluetooth. The icon in system tray is blue (not grey).
Right click on it -> Device Manager -> New
The wizard starts. It sees my Palm, but then says: "Sorry your Bluetooth Device does not support input Service". I don't know what to do.
Opensuse 11.3 kde 4.5
kbluetooth 0.4.2-10.5

View 8 Replies View Related

Ubuntu :: Monitor Input Signal Out Of Range / Fix It?

Nov 28, 2010

I basically destroyed my laptop a couple of years ago. Windows XP wouldn't even start but it didn't come with an installation disk. I tried recovering it but it just died. So a few months ago I put a box of thing on top of it which broke the screen! I was going to chuck it out until I stumbled upon a page which told you you could use it as a web server.

I decided to use it to host my website. I installed ubuntu without a problem however it wasn't until I was about to start it up I found out it was against BT's terms and conditions!! So since I installed ubuntu I thought I might as well make use of it and use it to render my files. When I went to turn it on for the second time and plugged it into the monitor it said input signal out of range!

I can see the login screen but I can't move the mouse or anything. I can't access the terminal, how can fix this?

View 9 Replies View Related

Ubuntu Installation :: Monitor Stops Getting Input From Computer

Jun 1, 2010

Due to the problem with the upgrade killing xp partitions, I reformatted my drives and am trying to install 10.04. However, after choosing install ubuntu or try ubuntu without changes, my monitor stops getting input from my computer. If I click the try ubuntu, I hear the start up noise on my speakers, but I see nothing.

View 2 Replies View Related

Ubuntu Installation :: Can Not Run Live Cd Monitor Input Out Of Range?

Nov 7, 2010

this has happened with a few different attempts of ubuntu based distros lately ... i try to boot a live cd it gets to where it starts loading and the monitor pops off and says input out of range ... im aware that this is a known bug with xorg choosing either the wrong resolution or refresh rate ... but what the heck are we supposed to do , i can't get far enough into the boot process that i can open a terminal and try to bypass xorg ... so will all future distributions of ubuntu just be out of the question for me ? if you ask me what needs to be done is make the installer ASK what resolution you want to attempt to boot at .... similar to what puppy does

View 2 Replies View Related

Ubuntu :: No Keyboard Input And Window Borders On Second Monitor

Jun 11, 2011

I run Natty 64x (new install) and have setup to use two seperate x servers and no xinerama. When I start my computer everything seems fine on both monitors but once desktop is loaded and I start an app in the second monitor, I can't type anything and the window borders are missing. If I type "DISPLAY:=0.1 metacity" the problem gets fixed but I get an error that a window manager is running already.

I have AMD/Nvidia, GeForce 8800GT.

View 5 Replies View Related

Hardware :: Converting HDMI Computer Output To VGA Monitor Input?

Dec 31, 2010

I have a small 'nettop' computer that only has a HDMI output. The only monitors I have only have VGA input. Is there a way to use a HDMI-to-VGA or HDMI-to-DVI + DVI-to-VGA connection setup to hookup this computer to my monitor?Let me make it clear that I am not looking for a high-quality, high-definition display. This is going to be hooked up to a monitor only until I have the system up and running and then it'll be a ssh-only headless server

View 3 Replies View Related

General :: Compaq Trinitron Monitor P900 - Model PE 1030 Driver - Unable To Change Resolution

Dec 25, 2010

Need a driver for a Compaq P900 Trinitron monitor, Model PE1030 using Linux Mint 8 Helena. Unable to change resolution. Max is 600 x 400.

View 6 Replies View Related

OpenSUSE :: 11.3 And KDE 4.4.4 Multi Monitor Support ?

May 9, 2010

I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.

From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.

About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.

View 9 Replies View Related

Red Hat :: RHEL 5.5, Monitor Does Not Support Display?

Aug 14, 2010

I am using linux from last three month.

View 1 Replies View Related

Fedora :: No Monitor Input During Boot, Unable To Enter Text Mode From X Window

Nov 24, 2009

I installed Fedora 11 on my system (see below) using the i686 DVD. The graphical install worked just fine, and after the system booted back up, the X server was working very well.

There is no boot text. On the other system with Fedora 11, I can see the boot text scroll by in the window and/or a progress bar at the bottom of the monitor during the boot sequence. On this system, the monitor says "No Input", and nothing appears until the login prompt for the X window. I am able to enter the BIOS configuration page and navigate through it without any issues. I can also edit the grub commands before Fedora loads without a problem.

If I boot in text mode, no login prompt appears. If I wait long enough, the monitor enters the power save mode since it is not receiving a signal. I am able to log in to the system with my user name and password, and then start the X server. Once the server starts, the monitor turns back ON and all is well.

From the X window, I use the CTL+ALT+F2 key to enter text mode. The monitor stops responding. If I press the ENTER key a couple of times, then press ALT+F7, I can briefly see the text window with a couple of login prompts before the X window starts responding again.

How can I get the text mode to work? Why is there no input to the monitor when booting?

System:
Intel D945GSEJT motherboard with Intel Atom N270 processor
2GB RAM
120GB SATA Hard Drive
Fedora 11 i686

View 4 Replies View Related

Ubuntu :: Dual Monitor Support Broken?

Jan 5, 2010

Since my upgrade to 9.10 I can't expand my windows over two monitors anymore.

I'm using the NVidia software, external drivers and everything was working before.

Is there something I missed during the upgrade?

View 3 Replies View Related

Ubuntu :: State Of External Monitor Support

Jan 13, 2010

My experience with external monitors in Linux is harrying at best. It's getting better, but it still ain't perfect. My current experience (I have an nVidia card, with nVidia drivers, on a Vostro laptop):

Turn on computer (booting Karmic).
Connect external monitor
Click on System->Preferences->Display
Redirect to nVidia's tool
Perform at least 8 more clicks to enable secondary monitor.
Realize resolution isn't optimal and set it with another few clicks.
Click Apply
Accept changes
Quit, then really quit, the app.

I always have to set the resolution, it doesn't detect it automatically. The main screen is *always* on the external monitor no matter my settings. I'm screwed if I unplug the monitor but forget to go through steps 1-8, this time disabling the external monitor. I have to replug it in, then turn it off, then I can unplug it. If I unplug the external monitor and plug in another one (going through steps 1-8 twice more) with different resolution capabilities (e.g. a projector), the settings get all messed up again.

Why can't adding an external monitor be automatic? It nearly is on OS X for instance. I plug it in, and it automatically detects the monitor and makes it a secondary monitor, or mirrors them, or turns it on and turns off the laptop screen. All the while being consistent about it. When I unplug the monitor, it knows instantly that I've done that, and reconfigures the laptop screen once again.

I imagine the answer is because no one has stepped up to do it yet, or it's in progress. So my question: what *is* the state of external monitor codes in Linux, and are there any plans to implement them in Lucid? Further, what would be a project, with *user friendly* context, to which I could tune in?

Or, am I not aware of the "right way" to do it?

I define user friendly as roughly the level of kernelnewbies.org . That is, kn.org is my gauge of what I can understand.

View 1 Replies View Related

Ubuntu :: Dual Monitor Support With NVidia ?

May 8, 2010

I've managed to get dual monitor support working, but it seems a little sub-standard.

- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other

View 3 Replies View Related

Ubuntu :: Multi Monitor Support (Different Resolutions)

May 13, 2010

I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.

I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.

View 2 Replies View Related

Ubuntu :: 1920x1080 Resolution Monitor / Does It Support Grub?

Jul 21, 2010

I installed Ubuntu 10.04 on a new system. The system is not showing correct resolution in the grub menu and the splash screen is black, until I reach the logon screen.Screen resolution, and video rendering after booting is picture-perfect.I presume this is a bug of the sort "VBE does not support 1920x1080 wide screen resolution".Or, maybe I am missing some point.I hope there must be some workaround.

View 9 Replies View Related

Ubuntu Installation :: Wubi Install - No Monitor Support ?

Aug 26, 2010

I tried installing Ubuntu via the latest Wubi on my HP machine; AMD64 processor, NVIDIA GeForce 6150 LE graphics card. After restarting and selecting Ubuntu, my monitor (Viewsonic) told me it had no input, and proceeded to stand itself by. The computer sat there, turned on with no monitor, for about half an hour, and when I came back, windows was up. I tried restarting into Ubuntu again, got to the Grub menu, and selected Ubuntu before the same thing occurred. This time I didn't wait, but hard restarted it after a minute oh waiting. When I tried starting Ubuntu in Safe Graphics mode, I got through the initial bash bootup instructions before this occurred.

View 4 Replies View Related

Red Hat / Fedora :: Touchsmart Screen Doesnt Support Dual Screen Input

Nov 24, 2010

I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation?
Do some people have experience on this?

View 1 Replies View Related

Ubuntu Installation :: Error - (EE) No Input Driver Matching `fpit'

Apr 29, 2010

I've just finished installing lucid and started setting up my tablet and all went well until I tried to install the fpit driver. I tried installing it from synaptic but it says it has to remove ubuntu-desktop, xorg, xserver-core -- some very important things and then says "xserver-xorg-input-fpit: Depends: xserver-xorg-core but it is not going to be installed." I tried downloading the deb and extracting the driver manually but Xorg complains with:

Code:

(II) LoadModule: "fpit"
(II) Loading /usr/lib/xorg/modules/input/fpit_drv.so
(II) Module fpit: vendor="X.Org Foundation"

[code]....

View 7 Replies View Related

Ubuntu Multimedia :: Getting Dual Monitor Support Working In Unity With NVIDIA?

Jun 21, 2011

I have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".

I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.

How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.

View 7 Replies View Related

Red Hat :: Driver Support For Graphics Acceleration

Jan 4, 2011

I am using RHEL 6.0 OS runnig on an i5 core with H57 chipset. whether there is any support for GMA-HD in the builtin graphics drivers or do I need to add any extra driver for using GMA -HD?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved