Since my upgrade to 9.10 I can't expand my windows over two monitors anymore.
I'm using the NVidia software, external drivers and everything was working before.
Is there something I missed during the upgrade?
I've managed to get dual monitor support working, but it seems a little sub-standard.
- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies View RelatedI have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".
I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.
How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedIs there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedThis is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies View RelatedI am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies View RelatedI'm restoring an old TI Silent 700 terminal [URL] ... and have connected it to an RPi running the debian based Jessie release using a serial converter. After learning more than I wanted to about serial settings and support I now have it interfaced and communicating bidirectionally but have one last hurdle - proper support for a single case (uppercase only) terminal in agetty.
With the -U flag on it seems like the the login name is detected as needing conversion because lowercase login names work - but lower case passwords do not and once I get a bash prompt all input comes in as upper case. So the -U agetty flag only seems to apply to login name and is then forgotten (not passed on to login process or bash?) and various settings in stty like iuclc, xcase, iexten don't seem to work.
I'd really like to get this terminal working with native support but I'll also take a kludge of some kind (I've tried a tr pipe for example).
Here is what I think is the relevant portion of my systemd generator:
Code: Select all[Service]
ExecStart=-/sbin/agetty -U 300 %I $TERM
Type=idle
Restart=always
UtmpIdentifier=%I
TTYPath=/dev/%I
[Code] .....
My experience with external monitors in Linux is harrying at best. It's getting better, but it still ain't perfect. My current experience (I have an nVidia card, with nVidia drivers, on a Vostro laptop):
Turn on computer (booting Karmic).
Connect external monitor
Click on System->Preferences->Display
Redirect to nVidia's tool
Perform at least 8 more clicks to enable secondary monitor.
Realize resolution isn't optimal and set it with another few clicks.
Click Apply
Accept changes
Quit, then really quit, the app.
I always have to set the resolution, it doesn't detect it automatically. The main screen is *always* on the external monitor no matter my settings. I'm screwed if I unplug the monitor but forget to go through steps 1-8, this time disabling the external monitor. I have to replug it in, then turn it off, then I can unplug it. If I unplug the external monitor and plug in another one (going through steps 1-8 twice more) with different resolution capabilities (e.g. a projector), the settings get all messed up again.
Why can't adding an external monitor be automatic? It nearly is on OS X for instance. I plug it in, and it automatically detects the monitor and makes it a secondary monitor, or mirrors them, or turns it on and turns off the laptop screen. All the while being consistent about it. When I unplug the monitor, it knows instantly that I've done that, and reconfigures the laptop screen once again.
I imagine the answer is because no one has stepped up to do it yet, or it's in progress. So my question: what *is* the state of external monitor codes in Linux, and are there any plans to implement them in Lucid? Further, what would be a project, with *user friendly* context, to which I could tune in?
Or, am I not aware of the "right way" to do it?
I define user friendly as roughly the level of kernelnewbies.org . That is, kn.org is my gauge of what I can understand.
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
I installed Ubuntu 10.04 on a new system. The system is not showing correct resolution in the grub menu and the splash screen is black, until I reach the logon screen.Screen resolution, and video rendering after booting is picture-perfect.I presume this is a bug of the sort "VBE does not support 1920x1080 wide screen resolution".Or, maybe I am missing some point.I hope there must be some workaround.
View 9 Replies View RelatedI tried installing Ubuntu via the latest Wubi on my HP machine; AMD64 processor, NVIDIA GeForce 6150 LE graphics card. After restarting and selecting Ubuntu, my monitor (Viewsonic) told me it had no input, and proceeded to stand itself by. The computer sat there, turned on with no monitor, for about half an hour, and when I came back, windows was up. I tried restarting into Ubuntu again, got to the Grub menu, and selected Ubuntu before the same thing occurred. This time I didn't wait, but hard restarted it after a minute oh waiting. When I tried starting Ubuntu in Safe Graphics mode, I got through the initial bash bootup instructions before this occurred.
View 4 Replies View RelatedI've just gone and modified the MBR by following this article: [url]
What now happens is that I boot up the machine and all that comes up is an error:
The disk drive for /home is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery
I have /home on a separate partition. Using the manual recovery I can see that the partition still exists and has all the files.
What do I need to do in order to get /home mounting again? Is this even the issue?
I had been running a dual boot of both ubuntu and windows 7. I recently upgraded to ubuntu 11.04. After doing so i no longer have the option to select to load windows from the grub loader. Instead of the options presenting themselves my screen remains black before loading ubuntu.
View 9 Replies View RelatedI setup 11.3 on PC and Belinea monitor (troubleshoting monitor). Everything was fine but since I installed nvidia driver (via 1-click wizard) resolution and font-size has broken
So I plugg another one monitor - Samsung SyncMaster and reboot system. After boot-up resolution and either font size were OK. I was able to select correct resolutoion and font size wasn't so tiny like on Belina.
It's looks like OS 11.3 have problem with correct output on belinea monitor. Driver is installed correctly. I tried to genereate new xorg.conf .
I have not checked for a while but did, before posting this, do a search for multi monitor support with KDE 4.4.4 and found nothing.
From what I understand 11.3 is out sometime next month and KDE 4.4.4 is the KDE environment that will be released with that iteration of SUSe.
About a month ago I read about a number of problems with multiple monitor support under 4.4.4. Primarily these issues seemed to be with no more than 2 monitors. The SUSe 11.2 machine here uses KDE 4.3 runs three monitors (Intel core quad, pair of NVidia PCIe graphics cards). I was wondering whether any of the bugs with this type of configuration have been resolved. From what I understood 4.4.4 worked with problems using Twinview but I was not able to find anything that addressed the configuration of having separate X Screens.
I am using linux from last three month.
View 1 Replies View RelatedI am at my wits end with trying to figure out why this machine won't dual boot any more. I had to reload XP and it broke my grub. I have tried everything I can think of to fix it. I have to use SuperGrub cd to boot. I get the grub menu and when I select the kernel it gives an error 17, can't mount selected partition. Also, my sound is broke....again. I upgraded from 9.04 to 9.10 and had to uninstall grub2 to get everything working again
View 9 Replies View RelatedI just upgraded to Ubuntu 10.04 from 9.10 and now my Windows XP will not boot from grub. It shows up on the grub boot list but when I select it, all I get is a black screen. It worked perfectly just minutes before the upgrade, but now I cannot use windows, which I need really badly at this point.
View 9 Replies View RelatedI just downloaded Ubuntu 10.10 and installed it today. I was just wondering, does Ubuntu support dual monitors? I tried looking through the settings in Ubuntu but I couldnt figure it out.
View 1 Replies View RelatedRunning Ubuntu Lucid Lynx here. Got a LCD AOC monitor. Model e943Fws. Starts OK until logging screen. As soon as i try to log into my account a "input not support" floats around the screen. Are there drivers i should install? Anybody knows this LED monitor..?
View 5 Replies View RelatedI recently installed Ubuntu Lucid on my sisters laptop and it will now no longer boot into Windows Vista.
When Vista is selected, the loading bar is briefly displayed before the screen turns black and returns to GRUB.
EDIT : More specifically, first a long bar is displayed at the bottom of the screen that says something like 'loading windows files' above it. Then the standard vista loading bar, with (c) microsoft under it. Then I get an hourglass pointer and a message "please wait a moment" in the centre of the screen. After a few seconds, the screen then goes black and the computer reboots.
I used a live CD to install Ubuntu and I chose the default automatic option for the dual boot partitioning. All the data on Windows can be accessed from Ubuntu, it just will not boot.
Here is the output of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
I installed Ubuntu 10.04 lucid lynx 64bit on my mac pro in a dual boot setup with os x. When installing I had some trouble figuring out the partitions, especially because the thing happened with the extra partition from nowhere. I deleted the small partition created by the installer, synced the GPT and MBR, installed GRUB on /dev/sda4 and all was fine.
After my first software update my system is now broken, after rEFIt it got stuck on a black screen. I started up from the livecd, chrooted into my system, reinstalled GRUB on /dev/sda4, installed it on /dev/sda too, but that did not really help. I now get to the GRUB rescue shell, but I'm pretty clueless what to do. Also it does not seem a widespread problem, since I didn;t find many reports of dual-boot macintels breaking with this update. What can I do to restore my linux system ?
1. Is there a way to change the broken glass/monitor background on the login screen???
2. I have tried to login as root, but it will not accept the password, but if I login with my user name and need to change things that require root privileges the password works fine.
I worked a little back in 05 and 06 with FC4 and FC5 but nothing until now..
I have recently loaded the new LTS SERVER 10.04 release and it loaded without errors. My only issue is that it does not seem to correctly identify the Dual Cores for each processor. (The HP xw9300 I have has two hardware CPUs - each one being Dual-Core - so there should be a total of 4 CPUs recognized - unless I am mistaken?) How I can debug the processor recognition for multi-core support to get the additional cores recognized.
My /proc/cpuinfo file looks like this:
Code:
xxxx@hostname:~$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 37
model name : AMD Opteron(tm) Processor 248
stepping : 1
cpu MHz : 2194.452
cache size : 1024 KB .....
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.
I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:
The Debian entry actually launches the GRUB menu which was installed with Debian.
Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.
In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....
Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
... returned "EFI boot on HDD".
[Code] ....
... Where is Debian?
FULL HISTORY ....
=============================
The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.
Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.
Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.
I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.
I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.
At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.