I installed fedora 12 X86-64 and after installing wine throw yum it is not working it reach to registering binary handler for windows applications [ok] and it is blinking several times and nothing happened after that
View 11 Replies$ wine /home/gnu/Downloads/win7/adobe/pagemaker7/Pagemaker/setup.exe
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
wine: Bad EXE format for Z:homegnuDownloadswin7adobepagemaker7Pagema kerSetup.exe
This is the error message. How should I proceed?
I want to install a 64bit-only application in my wine.But every time i try to load the installer it says that it only works on a 64bit-system.Iv'e tried the 32-version of the app and it works fine.I heard that since version 1.2 wine is able to support 64bits.But how do I force wine to load an app in 64bit-mode? I'm guessing there is an option to the wine command or something. But what is it? can't find anything in the man-page. And a google on the subject only brings up old posts from people who are trying to install wine in 64bit-ubuntu...
View 2 Replies View RelatedI got a xend start problem when I install xen 4.0.1 on ubuntu 10.04 64_bit my installation steps are as follows:
first, install packages$sudo apt-get install bcc bin86 gawk bridge-utils iproute libcurl3 libcurl4-openssl-dev bzip2 module-init-tools transfig tgif texinfo texlive-latex-base texlive-latex-recommended texlive-fonts-extra texlive-fonts-recommended pciutils-dev mercurial build-essential make gcc libc6-dev zlib1g-dev python python-dev python-twisted libncurses5-dev patch libvncserver-dev libsdl1.2-dev libjpeg62-dev iasl libbz2-dev e2fslibs-dev git-core uuid-dev ocaml libx11-dev bison flex
[code]....
Im running Fedora 13 x86_64, I used to run the 32bits version, but I decided to get all I can from my 64bit procesor. Anyways, I have to run some aplications on Wine, like Microchip MPLAB software, for programing PICS, it used to workk perfectly fine on my 32 bits version, but ever since I installed the 64bits version, I can't get anything to work. Of course there are alternatives, but my coworkers use Windows, and MPLAb, alternatives have quite similar, but yet diferent sintaxis, so I kinda need to solve this, otherwise, I will have to migrate back to the 32bits version. I tryied o install some clumsy soft, but still, wine can't initialize anything. I tryied to install lots of libraries, but problably Im missing something.
View 4 Replies View RelatedI can get all of the 32 bit packages installed just fine, but when I run ./configure I get the following errors:
[code]...
how to resolve these errors.
Just installed wine from repository.Trying to install a windows application, but getting the following:
$ wine "f:Setup.exe"
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
[code]...
I am running it on a Dell PowerEdge 300 and am having all kinds of problems. First problem was that the second NIC will not start at boot. I have to manually start it every time I re-boot.
Ok, so I set up SSH and no mater what I do, it too will not start at boot time. Same with Apache and vnc.
So I use it as a development platform with eclipse. I have my Laptop running 14 32 bit and it was a dream. This eclipse install was a pain from the get go. Now I cannot get the debugger to consistently run no mater what I do. It will run for a bit then the next time I try it will not start. Very strange.
PHP is also a problem. None of the mysql functions work. Yes I loaded the mysql libs but still no luck.
Think I;ll go back to the 32bit 14 and stick with it for a while unless someone has some good suggestions on how to get it running smoothly.
I just installed FC11 yesterday and I can login on terminal window usingu and root password no problem. However if I try to login atachine startup screen as root and password it tells me denied password.
View 4 Replies View RelatedKtorrent crashes on start (64bit). After update.
View 11 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View RelatedI just installed Fedora 12 86_64, and Wine won't run any software that I attempt to install. It just says opening file, and after a few seconds disappears. The same software that I was running in Wine f10 is not running in 12.
View 14 Replies View RelatedI'm trying to install 13 x64 with Unetbootin, but i'm getting '
Code:
no root device found boot has failed. sleeping forever
I have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies View RelatedI recently installed Fedora 11 with VMware workstation. I downloaded the Wine file (wine-1.0.1.tar.bz2 and wine-1.0.1.tar.bz2.sign, its a source archive i think)from [URL]. Those two files are now in my flash disk. I went throught the wine user guide but they haven't explained about how to install it in detail, but i found that, "Compiling & installing Wine from source is slightly more difficult than using a package".
I went to [URL] looking for packages but again its saying, i should install some library's before building Wine and leads to [URL]. I went there & found a web page with some codes.
about 5 mount ago, i installed WarZone game on my fedora 12 x86-64 and it's run correctly but when i upgraded my f12 to f13, my desktop won't start correctly after quit warzone. when i quit warzone, my desktop won't start correctly, and i have a black screen with mouse, and nothing else. i asked about this problem, on warzone's forum and they called me:
Quote: Most likely this problem has something to do with your graphics driver. But I would wait for more insight from others if I were you. It is a driver/library problem, so you should report the bug to Fedora.
After the 4th install The printer will at least produce a test page, but the available resolution is low, I suspect I need the gutenprint enhanced drivers, printer is a EPSON R285. Where do I find the nvidia libs so I can use the Nvidia driver for my ancient 8500 GTX. Using the package manager find nvidia shows nothing.
Are these libs held on another repo, as in other distros?, and is Acroread availble? is there a listing if the repos somewhere, I have some apps that have to be compiled and are a pig to get going, due to using those funny cut down libs that ubuntu use. When I backed up the last failing version of FC13, which hung as soon as yum was started, didn't print ect, I didn't close firefox down before copying the file. So the user config is locked, ie, you get firefox is already running, and fails to start. I found parentlock and deleted it, but but there is another lock file that needs to be removed, and I can't find it.. Anyone know the location of the lockfiles for firefox.?
When trying to get wine I do got this error.
Missing Dependency: kernel >= 2.6.29.1-52.fc11 is needed by package libdrm-2.4.11-2.fc11.i586 (updates)
As I understand I must update my kernel before I can move on. How do I do that? I would want a RPM package if that's available.
How can I install software that comes as a .run file in a way that it is accessible at the command line and under the applications menu or the equivalent? I am aware that root privileges are required and know how to get them. The publisher of the software does not publish .rpm files.
The distribution I am using now, which will remain nameless other than it is not Fedora, is very secure, but nobody seems willing or able to tell me how to do this. There is an old version of the software for my distribution available, but it is three releases and likely a couple of years old. I looked around the file system, found the executable, but it was a small file that probably calls the real executable under another name.
The software in question is a electronic circuit capture and printed circuit board design program. I have numerous projects and a library I need access to.As for installing the Windoze (Quattro Pro) software, I couldn't get it to install at all, even with root privileges. (WINE complained I didn't have root privileges when I invoked it at the # prompt. I couldn't determine how to install the software on anything other than XP. ) I wasn't and remain uninterested in debugging multimegabyte spreadsheets a second time
I have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies:
libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64
libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
What to do for me to resolve this error.
I have a 64 bit version of fedora 13. I've been trying to install adobe flash and I've tried a couple of different guides and none of them worked for me can anyone give me better instructions?
View 14 Replies View RelatedWhen ever I am trying to install Fedora12x86_64 in VMware Player 3.1.0 I am having a strange error. Please see the attachment and reply. I am running Fedora12x86_64 in my laptop and VMplayer 3.1.0 is installed in it.
View 10 Replies View RelatedError " unable to build kernel module " see the log file /var/log/vboxadd-install.log for more details.
View 8 Replies View RelatedI'm new to Fedora and the Red Hat way of doing things, having been a Ubuntu/Mint user for the last 5-6 years. I've been using Fedora for my daily computer now for the last 3-4 months - a change that has definitely been for the better! However, earlier this morning I went to install a .rpm, and yum output via terminal the following error:
Code:
[leeky@darkstar ~]$ sudo yum install opera
[sudo] password for leeky:
Loaded plugins: fastestmirror, langpacks, presto, refresh-packagekit
Adding en_US to language list
Loading mirror speeds from cached hostfile
* fedora: mirror.netrino.co.uk
* rpmfusion-free: mirror01.th.ifl.net
* rpmfusion-free-updates: mirror01.th.ifl.net
* rpmfusion-nonfree: mirror01.th.ifl.net
* rpmfusion-nonfree-updates: mirror01.th.ifl.net
* updates: mirror.netrino.co.uk
Error: database disk image is malformed
[leeky@darkstar ~]$
This is the first time I have received this error. I've now tried the following methods of resolving this problem with no luck:
1. Code:
yum clean all
2. Code:
yum clean metadata
yum clean dbcache
yum makecache
3. Physically removing the /var/libs/yum folder, and creating a new "yum" folder, and then step two above to rebuild it. Either way the problem then still returns in terminal.
I'm trying to install Wine on Fedora 13, I tried installing it from the "Add/Remove Software Repository" but the installation fails, I tried installing it from the Terminal using the following command as root: "yum install wine"
Here's the output I get:
Code:
I recently gave the boot to Windows and installed Fedora 10. Under Windows, I was using VirtualBox for all of my virtualized computing needs. I had set up a virtual network with two virtual machines - one running Windows Server 2K3 and the other running Windows 2000 Pro. I could run both VMs at the same time and still use the host OS. Now I am trying a similar setup under Fedora, I am using VirtualBox to run Server 2K3 and Windows XP. The problem I encounter is that when I run one VM, one of my CPU cores rockets to 100% usage and the other hovers around 40% - 60% usage. Is there a way to enhance performance so I can run both VMs at the same time? Third, what would be the effects of me installing the Xen runtime environment package or the Xen emulator for KVM?
System specs:
OS: Fedora 10 x86-64
CPU: Athlon 64 X2 3800+ (Toledo)
RAM: 2GB PC3200
GPU: GeForce 7600 GT XXX
I have been using for over a year now, my 64-bit computer first with Fedora 8 and now with Fedora 10 with 2Gb of RAM just fine. Today I purchased an extra 2Gb for the system and upon installation from the GRUB screen Fedora 10 simply won't boot. It does boot with 3Gb, and it doesn't matter which stick I use for the 3Gb configuration, or what slot do I put the sticks into the motherboard, however if I place the four sticks, F10 simply won't boot. Should I pass a command line argument tot he kernel? If so, which?
View 11 Replies View Relatedso, i have 2 23" 1920X1080p monitors they were working fine, but i just didn't have the 3d support i needed to play some games that i enjoy. So... i tried installing the kmod-nvidia and the xorg x11 libraries that all of the other forums told me to do. then i restarted and now only one screen is working, at 1280X1024, it's "unknown" and i haven't a CLUE what to do here
View 9 Replies View RelatedWhat is the best way for installing Firefox and Sun JDK 32 bits alongside my 64 bits version?
View 2 Replies View Related