Fedora :: Install Library's Before Installing Wine In 11?
Nov 9, 2009
I recently installed Fedora 11 with VMware workstation. I downloaded the Wine file (wine-1.0.1.tar.bz2 and wine-1.0.1.tar.bz2.sign, its a source archive i think)from [URL]. Those two files are now in my flash disk. I went throught the wine user guide but they haven't explained about how to install it in detail, but i found that, "Compiling & installing Wine from source is slightly more difficult than using a package".
I went to [URL] looking for packages but again its saying, i should install some library's before building Wine and leads to [URL]. I went there & found a web page with some codes.
View 1 Replies
ADVERTISEMENT
Jul 7, 2011
When I install wine the add/remove program wants to install both 86_64 and i686 files. I have the x86_64 version of Fedora 14. I am having problems with counterstrike and have installed it using Wine, have noted problems when both types of files are installed.
I would like to have Fedora set up just right but as with all Linux distros, am having trouble keeping my head above water with fc14. I have success up to a point and then want to go back to Windows for its simplicity. Just this wine problem
View 1 Replies
View Related
May 21, 2011
I'm trying to install the Anti Grain Geometry v2.5 library. I have successfully compiled the sources, and as a result I've got a file named libagg.a . Now, I'm not sure what's the next thing I supposed to do. I tried to copy this file as /usr/lib/libagg.so and the run ldconfig, but I get sudo ldconfig ldconfig: /usr/lib/libagg.so.2.5 is not an ELF file - it has the wrong magic bytes at the start.I also tried the same thing in /usr/lib64/libagg.so, with the same result.I'm not sure if this is what I'm supposed to do,
View 3 Replies
View Related
Mar 4, 2011
Is that 'normal' for the sbopkg install of Wine?
View 6 Replies
View Related
Dec 2, 2009
I just installed Fedora 12 86_64, and Wine won't run any software that I attempt to install. It just says opening file, and after a few seconds disappears. The same software that I was running in Wine f10 is not running in 12.
View 14 Replies
View Related
Feb 26, 2010
I installed fedora 12 X86-64 and after installing wine throw yum it is not working it reach to registering binary handler for windows applications [ok] and it is blinking several times and nothing happened after that
View 11 Replies
View Related
Feb 1, 2010
When trying to get wine I do got this error.
Missing Dependency: kernel >= 2.6.29.1-52.fc11 is needed by package libdrm-2.4.11-2.fc11.i586 (updates)
As I understand I must update my kernel before I can move on. How do I do that? I would want a RPM package if that's available.
View 3 Replies
View Related
Mar 12, 2010
$ wine /home/gnu/Downloads/win7/adobe/pagemaker7/Pagemaker/setup.exe
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
wine: Bad EXE format for Z:homegnuDownloadswin7adobepagemaker7Pagema kerSetup.exe
This is the error message. How should I proceed?
View 2 Replies
View Related
Aug 21, 2010
How can I install software that comes as a .run file in a way that it is accessible at the command line and under the applications menu or the equivalent? I am aware that root privileges are required and know how to get them. The publisher of the software does not publish .rpm files.
The distribution I am using now, which will remain nameless other than it is not Fedora, is very secure, but nobody seems willing or able to tell me how to do this. There is an old version of the software for my distribution available, but it is three releases and likely a couple of years old. I looked around the file system, found the executable, but it was a small file that probably calls the real executable under another name.
The software in question is a electronic circuit capture and printed circuit board design program. I have numerous projects and a library I need access to.As for installing the Windoze (Quattro Pro) software, I couldn't get it to install at all, even with root privileges. (WINE complained I didn't have root privileges when I invoked it at the # prompt. I couldn't determine how to install the software on anything other than XP. ) I wasn't and remain uninterested in debugging multimegabyte spreadsheets a second time
View 5 Replies
View Related
Jul 28, 2010
I'm trying to install Wine on Fedora 13, I tried installing it from the "Add/Remove Software Repository" but the installation fails, I tried installing it from the Terminal using the following command as root: "yum install wine"
Here's the output I get:
Code:
View 13 Replies
View Related
Mar 19, 2010
when I tried to install wine I got "Missing Dependency: wine-gecko is needed by package wine"so I looked for wine-gecko and download it but also when I tried to install it I got "Missing Dependency: wine-gecko is needed by package wine"it seems that I am in loop each package need the other what to do please?
View 1 Replies
View Related
Feb 16, 2011
By default, Fedora x86_64 only installs 64 bit libraries under /lib64 when OS installation! I think, it is not very good because there are so many 32 bit application software, without 32bit library, 32bit application can not run at all! Why Fedora not install both libraries by default, any concern?
View 2 Replies
View Related
Sep 3, 2011
this error happen while installing wine for fedora 15 x86_64 using yum extender, the same problem also happen when installing it using terminal
10:57:02 : ERROR: Dependency resolving completed with errors
10:57:02 : ERROR: Protected multilib versions: 2:libpng-1.2.46-1.fc15.i686 != 2:libpng-1.2.44-3.fc15.x86_64
View 10 Replies
View Related
Oct 14, 2010
I'm running FC11 on an Intel 686 server and would like to solicit some help. I'm writing an Expect script to discover our lab network and would like to insert the results into a mySQL database. I've installed Apache/PHP/mySQL via the LAMPP distribution. I've hit a brick wall, however, in trying to install the mysqltcl library. how to install the library. I have downloaded an RPM, but installatiojn is failing due to missing dependencies: libmysqlclient.so.10 and libmysqlclient_r.so.10. And I have no luck in locating and installing those.
View 1 Replies
View Related
Sep 3, 2010
how do i install GSL 1.14? i have downloaded the tar file from [URL] and it is now sitting in my Download folder. i do not really understand the instructions in the 'install' text file that came with it.
i tried the synaptic package manager, but the version in there is not updated.
View 4 Replies
View Related
May 21, 2010
i want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies
View Related
Dec 18, 2009
Lot of questions about WINE... When I'm done I'm going to make a HOWTO so that others can do what I did It's hard work, but I'm nearly done.The last problem I'm having is the WINE menu on GNOME won't show up after a install of WINE from a .deb package (it usually does). This was after I compiled WINE from source and removed it with "make uninstall" and "rm -rf /.wine".So now I installed the WINE from a deb package and the Wine menu entry is not showing up.I've tried re-installing Wine and rebooting my PC but nothing seems to work.
View 3 Replies
View Related
Aug 11, 2010
Fedora 13 (2.6.33.6-147.2.4.fc13.i686)"yum install wine" ends with an error message. If I understood correctly it complains about missing wine-common package "Requires: wine-common = 1.2.0-1.fc13".However, when trying to install wine-common "yum install wine-common" it says it is already installed "Package wine-common-1.2.0-1.fc13.noarch already installed and latest version".
Code:
[root@nc6000 boris]# yum install wine
Loaded plugins: downloadonly, fastestmirror, presto, refresh-packagekit, remove-
[code]....
View 3 Replies
View Related
Jan 6, 2011
I am trying to install IE. But after entering this command
Code:
I am getting this prompt
Code:
Your wine does not have wineprefixcreate installed. Maybe you are running an old Wine version. Try to update it to the latest version. After that now I found that I have installed code (Oxford dictionary with wine it was not working too.
View 8 Replies
View Related
Oct 28, 2010
I managed to completely screw up my wine, so decided to go from scratch.
yum remove wine*
rm -rf /home/jan1024188/.wine
Now when I go yum install wine it installs as root and in /root/.wine. I don't want this. What do I do?
View 3 Replies
View Related
Feb 7, 2011
I have fedora 14 installed on my dell laptop and I am trying to install wine (wine-core). I downloaded it in rpm format but when in tried to install it I got a message that I needed to install two more packages (nss-mdsn and wine-common). I installed nss-mdsn but when I tried to install wine-common I got a message that I have to install wine core for it and when I tried to install wine-core. I got a message to install wine-common first and I tried to install both of them at the same time but still it didn't work. I cant install it online with yum because of a few other problems.
View 2 Replies
View Related
Aug 5, 2010
I've tried downloading the RPM file on their website, But I always get an unknown error message.how to do this? Like what commands should I Run, etc. I'm VERY new to linux, and every time I read a guide one command seems to be for one os, and the other command for another.
View 4 Replies
View Related
Feb 17, 2011
I installed a library to the /usr/local/ prefix in Linux using ./configure && make && make install. What environment variables do I need to set in order for the linker and compiler to search these new library and header paths?
View 1 Replies
View Related
May 29, 2011
I would like to run Blender (3D modelling software) on RedHat Enterprise. I have a problem with missing libraries (libavutil50.so). Second problem is that I have no root access so I cannot install rpm package with libavutil50.so. Does anybody knows how can I manage this? Is it possible to install somehow libavutil50.so in my /home folder, that Blender will have an access to this library ?
View 1 Replies
View Related
Dec 30, 2009
The newest version of wine 32-bit (1.1.32?) seems to be a disaster. I had Newsbin Pro working great in Fedora 10. Now this program won't run with wine.i686 on Fedora 12 x64.
I have tried Crossover Linux 8 standard and Newsbin Pro works with that. Crossover is using wine 1.1.18. However that will cost me $40.
How do I install an older version of wine with the dependencies in Fedora 12 x64?
I searched for an rpm and found various flavors of wine rpms. Can I just install that older rpm?
View 4 Replies
View Related
Mar 21, 2011
I am currently using Ubuntu 10.10 and am wanting to switch to Fedora 14. I have always loved the way Fedora looked and felt. So I am finally making the transition. But I am wondering does Wine work well with Fedora 14? If so how do I install through the terminal. I know it is the harder way but I find it gives me more customization. I prefer it, so what would the command be? With Ubuntu it is sudo apt-get install wine1.2 what is it in Fedora?
View 2 Replies
View Related
Apr 26, 2011
I'm new to fedora. I am using a core i3 desktop computer. I installed fedora 14 into my desktop and I Downloaded a wine 1.3.14.tar but I cannot install it. I tried tools/wineinstall in the terminal bu it say "Your directory is wrong".
View 14 Replies
View Related
Jul 22, 2011
I'm trying to use Wine to install windows installer, but whenever I try to run the .exe file and error comes up that says "bad EXE format for"
View 4 Replies
View Related
Jul 10, 2010
I am installing mod_perl on the Linux box. Could successfully installed httpd, mod_perl, expat. Now when I try to run "make" command for libapreq2-2.12, it gives following error -
[FONT="Arial"]Making all in glue
make[1]: Entering directory `/opt/customer/apache/2.2.8_64_modperl/lib/libapreq2-2.12/glue'
cd perl; /usr/bin/perl Makefile.PL -apxs /opt/customer/apache/2.2.8_64_modperl/bin/apxs
Can't locate Apache2/Build.pm in @INC (@INC contains: /usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.4/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.3/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.1/x86_64-linux-thread-multi
[Code]...
View 2 Replies
View Related
Nov 19, 2010
I am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
View 2 Replies
View Related
