I am trying to install libg++2.7.0 package in FedoraCore 6 on a DELL machine that has Intel Pentium D processor.I get an error saying "unrecognized host system name i686 unknown linuxoldld"
View 1 RepliesMy laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View RelatedMy attempt to install Fedora 10 x86_64 to a HP EliteBook6930p with an Intel Centrino 2 processor failed. Initially the CD load presents the start screen where I select Install. Then the machine displays multiple errors. When the error scrolling stops the last comments displayed are:
ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.PSWT] (Node ffff88007fb48720), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.GTTP] (Node ffff88007fb486e0), AE_AML_PACKAGE_LIMIT
[Code].....
For the last couple of days I've been trying to install Fedora 11 x86_64 without success on my new machine, specs below. Intel Core i7-920 2.66Ghz MSI X58 Pro 7200 SATA Drive (can't remember the make) 6GB RAM So first off I tried install the 32bit live cd and that worked without any problems and installed fine. Only problem is I need access to the full 6GB of RAM so I really need to switch to the 64bit version.
I downloaded the full x86_64 install DVD and burnt it off. Rebooted and began the installation. It was going fine until it started installing the packages. The install seemed to freeze, although the mouse would still move. I left this for 10 minutes just incase it kick started again, but there was no HD activity or DVD activity so I gave up and rebooted to try again. The next time I started the install I had problems with it freezing while partitioning. I was beginning to think something was up with my hard drive or the drivers for the hard drives controller weren't working correctly (could still be the case).
After about 20 attempts with it freezing at various points I gave up and decided to try the x86_64 live cd. This booted with no problems so I started the install from the desktop. First thing I noticed was a kernel error pop up after I started the drive partitioning. Something about dereferencing a pointer in the kernel (0x20) (sorry no additional info at the moment, if needed please ask). This got me thinking the kernels not playing nice with my setup. However, it let me continue and copied the live image onto the hard drive. Then it started going through the post installation steps and this is where I got another kernel error (again I can get this if needed) and the window froze and all activity seemed to stop again. Has anyone got any ideas what could be causing these problems. I've also tried a CentOS 5.2 x86_64 version I had lying around and this had similar problems (although this does use anaconda as the installer too).
Since the Fedoraplus site is down, I alternatively downloaded the FC14 version in hopes that it would work. Instead, I now receive the following error any time I try to remove or install a package via yum:
Code:
[Errno 22] invalid mode ('w') or filename: '//var/lib/yum/rpmdb-indexes/conflicts.tmp'
I'm pretty sure the issue here is a typo in a file (the extra "/" in the path to "conflicts.tmp").
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
Trying to install 64bit onto Dell T3500 with NVidia Quadro NVS 295. Live Cd works and Install completes. When I boot I get BIOS and Disk info then boot switches to flashing cursor after disk read and then Monitor goes into sleep mode.
View 6 Replies View RelatedI find myself in unfamiliar territory. I am attempting to get a Dell M610 (in an M100e) running Ubuntu 9.1 64bit to talk to a Dell EMC Fibre Channel Array. The Dell has an Emulex card in it and it appears that the driver is loaded OK. What I am not sure on is what to do next! I have the SAN end configured but how do I get my LUN mounted on Ubuntu ?
View 1 Replies View RelatedI want to mount external hard drive using fedoracore 15 on a Verbatim 500 GB.
View 1 Replies View RelatedHas anyone tried upgrading the BIOS on Dell laptops? This is the Dell Windows based update for my Studio 1558 laptop. [URL] Would this work using Wine? Is there a Fedora way to apply this update?
View 3 Replies View RelatedI have had no problem installing Fedora OS on any of my Dell servers prior to this post. Anyway, I wouldn't call this a problem but recently, we bought another DELL server with Quad Core, 4GB, etc... AND this model has 2 swappable SAS Harddrives.
I wouldn't call myself an expert but then again I am not a newbie too. However, I have never setup any RAID before and now I am forced to setup RAID1 on this server. So, in a way, I am a newbie in setting up RAID
Would someone please point me in the right direction as I have no idea what I am supposed to do to setup the RAID. FYI, I will be installing Fedora 10 64bit on this server. I would appreciate if you can start from the very beginning, ie. partitioning, formatting the harddrives during OS installation, etc..
I'm trying to install OpenSuse 11.2 64bit on a new Dell Latitude E6410 notebook. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer DVD, but once I choose either Live version, to test it out, or just go for Install, after the first selection screen where I can change the default video at the bottom, I just get a black screen, no video.
I can't find any info on installing Suse on this notebook, (I think its only be available for a couple of weeks now). What do I do to get the screen to show me the graphical installer, Or how do I make the KDE Live version run from the 64bit DVD. I also tried the 32bit version DVD, but it wouldn't give graphics either, so it seems like an X issue.
I have a Sony Vaio laptop core i5 2.3 Ghz processor . Firstly , i know its prudent to install 64bit OS in my laptop , but will 32bit ubuntu also run in my system ?
Secondly , when i try to download the 64 bit OS , it shows amd64. Is the ubuntu64bit common for both amd and intel machines ?
This is probably a dumb question but I can't find out whether I have a 32 or 64 bit machine. Here's uname -a
[Linux Flow 2.6.34.7-56.fc13.i686 #1 SMP Wed Sep 15 03:33:58 UTC 2010 i686 i686 i386 GNU/Linux]
My machine have 8GB RAM, but only 3.8G,
View 7 Replies View RelatedI am having a problem recognizing the full 24GB memory on a dell PowerEdge R610 system I just purchased. This is the Fedora 11 preview version, uname -a returns this:Linux comp1 2.6.29.3-140.fc11.x86_64 #1 SMP Tue May 12 10:44:27 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
this is the off the shelf box from Dell and it is a quad-core with 24GB memory, but the OS can only recognize about 3GB, here is the free -m
total used free shared buffers cached
Mem: 2980 607 2373 0 24 176
the system is otherwise functioning normal. how to get the full 24GB of mem recognized?
for any reason after installation system hangs up and nothing happens, i�m newbie about linux, maybe the problem is the RAID 1 configuration of the disks. The machine is a R710 Server:
2 x Xeon E5520
4 x 2 GB Memory
4 X 750 GB SATA 7200 3.5" disk
PERC 6/i Raid controller
environment: 2.6.9-89.ELlargesmp #1 SMP Mon Apr 20 10:43:12 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 8) I am trying to install a 32 bit package on a 64 bit install. I don't get an error, it just does not install. This is the command I am using:
[Code]....
I want to run 64bit windows in a virtual machine on my fedora 14 64bit. using virtual machines and want to know what is recommended for fedora 14 and if 64bit vm's are supported yet.
View 5 Replies View RelatedI've a 64-bit Ubuntu Linux machine. Linux version 2.6.28-14-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 Ubuntu 9.04
Linux Debian 5.0 ( 2.6.28-14-generic x86_64)
When I tried to install the python-dev package on it using the command sudo apt-get install python-dev, I got following messages.
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed: python-dev
0 upgraded, 1 newly installed, 0 to remove and 271 not upgraded.
Need to get 978B of archives.
After this operation, 24.6kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
python-dev
Install these packages without verification [y/N]? y
Err http://in.archive.ubuntu.com jaunty/main python-dev 2.6.2-0ubuntu1 404 Not Found [IP: 91.189.88.45 80]
Failed to fetch http://in.archive.ubuntu.com/ubuntu/...buntu1_all.deb 404 Not Found [IP: 91.189.88.45 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Tried with --fix-missing option as well. Same errors in this case also. How I can install python-dev package on 64-bit Ubuntu Linux machine?
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedIs anyone running folding@home on a 64 bit machine?
View 9 Replies View RelatedI have been attempting to compile lmms on my 64 bit install of fedora 11, and have determined that I need the gcc-devel package. I cannot find it in any of the repositories. Where is it?
View 10 Replies View RelatedI am running Fedora 12 x86-64. I have a SRPM and want to build both x86-64 and i686 package. But the rpmbuild -ba can only build x86-64 package. --target=i686 is not working fine too, it try to find dependency in /usr/lib64. How can I build i686 package?
View 1 Replies View RelatedI'm installing in f13 the Adobe flash-player but I'm enabled to do it, what is the best procedure to do it, I have 64bit machine, I try with the nspluginwrapper but is occurring a compilation error:
gnu/stubs-32.h: No such file or directory
So what can I do to install adobe for 64bit machine.
I've tried the "yum clean all" option to no avail. When I update either with the GUI or command line, I get this error:
[root@joshhardman ~]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package anacron.x86_64 0:2.3-78.fc11 set to be updated
---> Package binutils.x86_64 0:2.19.51.0.14-1.fc11 set to be updated
---> Package crontabs.noarch 0:1.10-30.fc11 set to be updated
---> Package genisoimage.x86_64 0:1.1.9-6.fc11 set to be updated
---> Package icedax.x86_64 0:1.1.9-6.fc11 set to be updated
---> Package shadow-utils.x86_64 2:4.1.4.1-5.fc11 set to be updated
---> Package wodim.x86_64 0:1.1.9-6.fc11 set to be updated
--> Finished Dependency Resolution .....
Can I not have the 64 bit and 32 bit packages installed at the same time?
I recently gave the boot to Windows and installed Fedora 10. Under Windows, I was using VirtualBox for all of my virtualized computing needs. I had set up a virtual network with two virtual machines - one running Windows Server 2K3 and the other running Windows 2000 Pro. I could run both VMs at the same time and still use the host OS. Now I am trying a similar setup under Fedora, I am using VirtualBox to run Server 2K3 and Windows XP. The problem I encounter is that when I run one VM, one of my CPU cores rockets to 100% usage and the other hovers around 40% - 60% usage. Is there a way to enhance performance so I can run both VMs at the same time? Third, what would be the effects of me installing the Xen runtime environment package or the Xen emulator for KVM?
System specs:
OS: Fedora 10 x86-64
CPU: Athlon 64 X2 3800+ (Toledo)
RAM: 2GB PC3200
GPU: GeForce 7600 GT XXX
my update today failed, because the packages raydium and maniadrive depend on libphp5-5.2.9.so, which is provided by php-embedded, which is (apparently) not in the fedora 64bit repository There does however seem to be an i586 version...
View 2 Replies View RelatedI have configured the Adobe repos and when I try to install Adobe Reader, yum gives me the following error:
Code:
Transaction Check Error: package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed I tried --skipbroken as a longshot to no avail. Obviously if I try to remove nss-softokn-freebl it tries to remove all of Fedora , looked in Koji but there is nothing in there either.
This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.