Fedora :: When Using The Yum Gui It Hangs At 1/3 Of The Process Meter

Dec 18, 2010

i have a problem when using the yum gui it hangs at 1/3 of the process meter and wont budge no matter how long i leave it , using terminall everything works fine and fast but i would like if the gui is fixed its alot easier when searching for a suitable software

View 4 Replies


ADVERTISEMENT

Fedora Installation :: F12 64 Bit - Starts The Boot Process And Then It Hangs

Dec 28, 2009

I'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]

After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.

View 2 Replies View Related

Fedora Installation :: Process Hangs When Hourglass Filled Up

Jun 24, 2010

I tried to run Fedora 13 from a live CD on my old HP Pavilion a375c desktop (512MB RAM,3GHZ CPU,160GB Hard drive). The installation CD boots, shows the Fedora hourglass, but hangs when the hourglass is filled. I have used the same CD on a Lenovo Thinkpad T61 and a Dell desktop with 512MB memory without any problem. So the problem seems to be on the HP side. I've also tried to boot with CDLinux and Ubuntu live CD on the HP machine. All have the same symptom - hangs at the end of the hourglass during boot. Anything I can do to pass this stage? The HP spec is here: [URL].

View 8 Replies View Related

Fedora Installation :: Process Hangs On File 841of 1091?

Aug 8, 2009

New to linux. Trying it out on old laptop. First effort to get off MS OS. Toshiba satellite, celeron processor. Probably around 5 years old. Not sure about the rest of the specifics. Downloaded fedora 11, i386 version for DVD. Performed the media check at the beginning of the install (passed). 3 attempts to install so far. Begins without issue. Gets to installing file 841 of 1091 and just hangs. First time it was file # 831. Have let it sit for as long as 7 hours before shutting off power. Do I need to start with earlier version? Would like to confirm before I spend a bunch of time on downloads and burning disks.

View 11 Replies View Related

Fedora Installation :: Full DVD Install Process Hangs Constantly

Oct 20, 2009

I am trying to install Fedora 11 from a DVD. Not the live DVD, the full DVD and it hangs constantly. I had to wait 10 minutes for it to Find Storage Devices, 10 minutes to input a root password and now I am waiting for the drive shares to be setup. It's already been 10 minutes. I verified the disk and everything was fine. Why is this taking so long?

View 4 Replies View Related

Fedora :: Microcode - Boot Process Hangs At Startx Time

Sep 4, 2010

Ever since the kernel update to 2.6.34.6-47.fc13.x86_64, my boot process hangs at about startx time. I boot cleanly at runlevel 3 in either this or the previous 2.6.33.8 kernel. If I execute startx from here (in either kernel), the system hangs at the same place. During the early troubleshooting, I read in another thread (250929) about installing xorg-x11-drv-catalyst, which I did using yum. This led to the failure of the 2.6.33 kernel; yum remove did not fix this. I have carefully followed the instructions in the fglrx HOWTO (updated a week ago by Hlingler) as they relate to a PAE kernel (including reinstalling mesa-libGL), and that fixed earlier difficulties. Hence, I felt I needed a new thread.

dmesg tells me
Code:
microcode: CPU0: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Linux video capture interface: v2.00
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
microcode: CPU1: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 .....

But the program itself reports
Code:
# microcode_ctl -h
This program is for updating the microcode on Intel processors belonging to the IA32 family - PentiumPro upwards (x86-64 included). It depends on the Linux kernel driver. The website urbanmyth.org/microcode (mentioned by yum info microcode_ctl) clearly indicates that Intel has taken over this microcodecode distribution, and suggests that it is no longer valid for AMD processors.

I found a reference to a kernel configuration flag CONFIG_MICROCODE_AMD (as a plausible subsititute for CONFIG_MICROCODE_INTEL) that possibly belongs in a script in /etc/init.d - but the above context leads me to suspect this is not true any more. In any event, those flags are not mentioned anywhere in my init.d scripts - in fact nowhere in the entire /etc tree. My microcode file exists, and is dated March 23. How do I get it installed? Or is this completely unrelated to my hanging boot problem, as suggested by the "platform microcode" line in the dmesg output? If so, where should I be looking?

View 4 Replies View Related

Fedora Hardware :: How Does Battery Power Meter Works?

Mar 26, 2010

How does the Battery Power Meter works.As I know that the APCI is control by software.so my question is the battery connected also to other place on the board and send signal for how much power left.or every motherboard that have APCI "Enabled" can recognize only from the DC power connector how much left. if yes, in what why it recognized.

View 4 Replies View Related

Fedora :: Fluxbox Laptop Battery Charge Meter

Jun 24, 2011

I've been tooling around with Fedora with the Fluxbox environment on my old Dell 400SD4 laptop and it works fantastic. I'm still getting a feel for the environment, but one major concern that I had was a battery meter. Being a laptop, it's important to know when I'm almost out of juice. Does anyone have any suggestions for a battery meter for Fluxbox? Preferably one that can be installed through the yum repositories?

View 6 Replies View Related

Fedora :: Best Broadband Usage Meter For Fedora

Jan 14, 2010

Does anyone one know of a free broadband usage meter for linux which will record the amount of uploads and downloads on the netwrok and alert you when the limit has reached? I was using TB meter on windows Vista.

View 3 Replies View Related

Software :: Background Process Hangs?

Feb 10, 2011

I have a process A running in the background. When I start another process B also in the background, the system hangs the moment I hit any key. Process A and B communicate over a socket. Iam not even able to do a telnet to the system. Is there any precautions that I need to take while running in background

View 1 Replies View Related

Ubuntu :: 11.04 Hangs During Configuration Process

May 23, 2011

It goes through the kernel boot up, and the icon with the circle and keyboard. Then it stays on a blank screen with a large courser on the upper right corner. Then the courser becomes small. It sits their for a long time. Then the screen to boot or install comes up, and everything works fine. It hangs during the configuration process. I am unable to skip. I think it hangs during the kernel config.

I click on the drop down arrow and see the fallowing:
ubuntu ubiquity : update-initramfs: generating /boot/initrd.img-2.6.38-8-generic
My pc set up is as fallows:
Asus M2N-MX SE Plus
AMD Athlon64 X2 5000
A sata samsung lightscribe dvd
A IDE Western Digital HD (Do not know what model)
NVIDIA GeForce 9500

It is from a downloaded burnt copy. The md5 is good. I burnt it at a slow speed. I do have a known good 10.10, but it starts out exactly the same.

View 9 Replies View Related

Ubuntu :: Shutdown Hangs - Rc Main Process Killed?

Mar 29, 2010

recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:

Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.

Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.

View 1 Replies View Related

Ubuntu Servers :: Sometimes Does Not Start - Boot Process But Then Hangs

Oct 31, 2010

Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.

View 2 Replies View Related

Ubuntu Servers :: Process Hangs While Cleaning Cache?

Dec 7, 2010

I have a NFS server and I'm periodically cleaning the cache by using the following lines:

Code:

/bin/sync; /bin/echo 1 > /proc/sys/vm/drop_caches
/bin/sync; /bin/echo 2 > /proc/sys/vm/drop_caches

during the last days the cleaning process gets stucked at '/bin/echo 2', here's the process data:

Code:

27426 root 20 0 5488 704 576 R 100 0.0 896:06.34 /bin/echo 2

the process keeps running, so I find this more strange since it's not in zombie or D state.

View 2 Replies View Related

General :: Computer Hangs After Installation In Reboot Process

Dec 9, 2010

I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.

View 1 Replies View Related

Programming :: Process Hangs Up Upon Receiving More Than 8 Or 10 Signals In Centos-5?

Jul 23, 2011

My program is creating 4 threads per transaction. Threads doing nothing but simply sleeping.

Now, when transaction ends, I want to wake up all the threads from sleeping. For this I am using pthread_kill() to wake up the threads using signal SIGUSR2.

Problem raises when I put more transactions(eg. 100 trans). My process gets hangup.

View 3 Replies View Related

Slackware :: Unable To Complete Installation Of 13.0 - Process Hangs

May 28, 2010

I am unable to complete the installation of Slack 13.0 on a new machine with Intel DH55HC motherboard and Intel Core i5 750 processor. The installation proceeds smoothly until the 3'rd CD and then hangs at the FONTCONFIG UPDATE stage. The hung process is apparently rescan-scsi-bus which reaches this stage

"Scanning host 6 channels 0 for SCSI target IDs ....
"Scanning for device 6 0 0 0...
"NEW:

It is not possible to kill this process even with "kill -9". I have to kill the parent process which is Slack setup, so the installation is incomplete. There is another recent thread on this issue [URL] but it did not resolve my problem. How to correct or bypass this difficulty (maybe another kernel? I use the default).

View 5 Replies View Related

Ubuntu Installation :: Dell Studio - Process Hangs On The Second Page

Apr 16, 2011

I'm currently trying to install ubuntu but the installation process hangs on the second page of the installation (right after select language) I am booting from a usb. NO other OS is installed and I'm currently in "try it now" mode.

View 4 Replies View Related

General :: Background Process Execution Hangs Console And Ip Communication?

Feb 9, 2011

I have 3 processes to be executed in a particular sequence.

ProcessA
ProcessB
ProcessC

The requirement is that all the processes should run as background processes.

ProcessA talks to ProcessB and ProcessC using sockets.
ProcessB talsk to ProcessA only using sockets.
ProcessC talsk to ProcessA only using sockets.

[Code].....

View 3 Replies View Related

Slackware :: Boot Process Hangs At Audio Driver - No Sound / Get It?

Jul 13, 2010

When my system boots it hangs at

Code...

and hangs for another 120 seconds. In X11 I have no sound at all even after running alsaconf with no errors. My sound works perfectly in Ubuntu, so it's not a hardware problem. Are the two problems related or are they two separate things? Any help here would be hot.

View 10 Replies View Related

Ubuntu Installation :: PXE Server Diskless Setup - Boot Process Hangs

Jun 24, 2010

I have a PXE server which installed DHCP TFTP AND NFS service. and set them up followed by [URL].

The boot process hanged here:
ipconfig: eth0: SIOCGIFUNDEX: No such device
ipconfig: no devices to configure
[-n eho]
. /tmp/net-eth0.conf
/init: line 3: can't open /tmp/net-eth0.conf
...

What I did try to work around is,
1. Set portfast to all the ports connected the PXE server and client.
2. Edit pxelinux.cfg/default, try different setting in "ip=" (I did not find any menu in the internet which explain to to configure this file).

View 9 Replies View Related

Red Hat / Fedora :: Command To Stop That File/process Or Is It Just Kill The Process To Stop The Process?

Nov 11, 2010

I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process

View 2 Replies View Related

OpenSUSE :: A Bandwidth Meter For KDE?

Mar 23, 2010

in Gnome I used netSpeed an applet to simply monitor the use of bandwidth. Now in Kde I cannot find nothing to replace it.

View 4 Replies View Related

Ubuntu :: Add A Battery Meter To Taskbar?

Sep 26, 2010

in ubuntu 10.04 how do i add a battery meter to taskbar?

View 2 Replies View Related

Ubuntu :: No Progress Meter During Installation

Apr 30, 2011

I am trying to install Ubuntu 11 with Wubi and the progress meter is missing. I cannot see if it's 30% done installed or 60% or whatever. It's annoying.

View 4 Replies View Related

Software :: Hplip-gui's Toner - Ink Meter

May 31, 2011

How accurate is the ink/toner meter in the HP printer toolkit (hplip-gui)? The meter says my toner level is "good/ok" and displays a black bar with tick marks, but I'm skeptical of its accuracy. I bought this Laserjet P1006 last January, with a starter cartridge of toner that was rated for around 120 pages (if I recall), and have printed occasionally. I'm afraid of running out of toner right when I need to print something important and time-sensitive. Since it doesn't appear to be possible to look inside the toner cartridge (sorry, this is my first laser printer ), I can't do anything except hope the HP toolbox measures my toner level accurately.

View 2 Replies View Related

Ubuntu Multimedia :: How To Grep VU-meter From Terminal

Jan 28, 2010

Is there any way to get information about whether something is currently played via the speakers? Is there an app that "scans" the VU-meter (e.g. pavumeter) in a terminal and prints out any information about the current "sound-volume" that goes out?I'd like to create a script that prevents my Ubuntu to suspend while something (e.g. music) is played... I know that e.g. Rhythmbox has a plugin for that, but I'd like to use SongBird...

View 5 Replies View Related

Ubuntu Networking :: Need Broadband Usage Meter

Jun 30, 2010

I now have a 10 GB cap on my Internet and would like a meter to tell me how much I use in a month , my IP address changes if that matters gnome ,lucid lynx

View 2 Replies View Related

Programming :: Audio Level Meter In Javascript

May 23, 2011

When someone is speaking into the mic, I'd like a "level meter" such as the one that comes with gnome sound recorder, that flashes up and down when a sound is made or somebody talks.This will be done in Javascript, using the brand new "Rainbow API", i.e. inside the browser.I know nothing about audio programming, so - where would I get *started* with something like this? Could anyone tell me at least WHAT to Google?

View 3 Replies View Related

Ubuntu :: Battery Meter Never Accurate As Far As Time Remaining Goes

May 2, 2010

I have an Asus EEE PC900. Just installed 10.04 netbook remix and everything works fine straight out of the box. it works great and is a vast improvement on windows xp which was previously installed on the asus. Just one small thing - the battery meter is never accurate as far as time remaining goes - it currently says i have 19 hours 55 minutes to go - unfortunately this is not quite true i suspect. It was the same with 9.10, Does anyone have a solution for this?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved