I've been tooling around with Fedora with the Fluxbox environment on my old Dell 400SD4 laptop and it works fantastic. I'm still getting a feel for the environment, but one major concern that I had was a battery meter. Being a laptop, it's important to know when I'm almost out of juice. Does anyone have any suggestions for a battery meter for Fluxbox? Preferably one that can be installed through the yum repositories?
View 6 RepliesI had install ubuntu 10.04 last two days, and when the start up it shows this message. To open the laptop i also have to using battery only i cant charge while using the laptop and if not it will hang and the screen will freeze. I'm using aspire 2920 is this because of my laptop or something else. Can anybody tell me dude? D
View 7 Replies View RelatedHow does the Battery Power Meter works.As I know that the APCI is control by software.so my question is the battery connected also to other place on the board and send signal for how much power left.or every motherboard that have APCI "Enabled" can recognize only from the DC power connector how much left. if yes, in what why it recognized.
View 4 Replies View RelatedHow to set battery charge thresh ?I use thinkpad w500 with Debian 6 .
View 1 Replies View RelatedI contacted the computer manufacturer, and I am under warranty, but it will take forever to get a new battery.
I tried recalibrating it, and updating the BIOS, and still NOTHING.
Why? It was working before...
Any ideas or solutions...
It stinks because I can only get like 1 hour battery on this thing now...
So i just installed 10.04 LTS on my ibook G4 late 2004 model and it works great i partioned my Hd and have osx on 1 and ubuntu on the other and updated it last night and installed to drivers for wireless etc... but i dont see a way to monitor my battery status on the upper bar? when i try to add to panel there is no battery charge applet or whatever? when i enter this into the terminal " sudo add-apt-repository ppa:iaz/battery-status && sudo apt-get updatesudo apt-get install battery-statusTerminal then asks for my password but it wont let me type any sort ofpassword? not even my login passwordo i do not know what passwordterminal wants when none of the keys work?
View 9 Replies View Relatedon a Powerbook with 10.10 installed. The battery icon doesn't show up in the indicator area next to the sound volume when I'm unplugged unless I select to have the icon displayed even when my computer is plugged in. And even then, it doesn't show current battery charge.I have added pmu_battery to /etc/modules , and /proc/pmu/battery_0 has relevant information on battery charge, and emacs seems smart enough to know my battery level.I tried to install pmud, and but that conflicts with pbbuttonsd and removing that would remove ubuntu-desktop! :O (I would like to try pmud and pommed, as those seem to have a better feature set than pbbuttonsd.)
View 3 Replies View Relatedin ubuntu 10.04 how do i add a battery meter to taskbar?
View 2 Replies View RelatedI have an Asus EEE PC900. Just installed 10.04 netbook remix and everything works fine straight out of the box. it works great and is a vast improvement on windows xp which was previously installed on the asus. Just one small thing - the battery meter is never accurate as far as time remaining goes - it currently says i have 19 hours 55 minutes to go - unfortunately this is not quite true i suspect. It was the same with 9.10, Does anyone have a solution for this?
View 4 Replies View RelatedI recently had to turn ACPI off because of major errors like the child_rip error, but now I don't have battery support or anything like that. No battery meter, etc. Is there a way I can get this while ACPI is off?
View 1 Replies View RelatedI'm using fluxbox on my eee pc 1000h and use conky to display % battery charge but (unlike my previous laptop) I don't get a hardware-triggered beep warning me of low battery.I've done a bit of searching but haven't yet found a neat software solution for either a beep or toolbar notification. Any suggestions?(I'm not wanting to switch back to KDE right now.)
View 4 Replies View Relatedgetting back to our laptop, the stability window is ~3.2V. Meaning that when you operate the battery above this the electrolyte is oxidized on the positive electrode and reduced on the negative electrode. Remember that we only want to oxidize and reduce the active materials and don't want to do anything else. All these reactions other than the ones we want are called side reactions and these are really bad for the battery. The nominal voltage of a laptop battery is 3.7 V which means that something bad wants to happen as we use the battery.So long story short, stuff (e.g., passive layers and poor kinetics of reactions) happens and things are not as bad as they seem and you can increase the voltage up to 4.2V without bad things really happening. All chargers for Li-ion cells today cut the battery off when it reaches 4.2V. What you have to realize is that at 4.2V, these side reactions are present in finite amounts and start to chemically kill the battery, but its not that dramatic.
Operating to 4.1V makes things better and extends the life, 4.0 V is even better and so on. So why don't battery manufacturers cut the voltage off at, say, 4 V to get better battery life? Because every time you cut this voltage down you decrease the capacity of the battery and its run time. The 4.2V cutoff is a compromise between good run time and decent (read "not pathetic) life.On the other hand, if you charge the battery and then pull the plug (so to speak), the battery discharges some, the voltage drops, and these reactions become less of a problem and your battery life goes up. So the best things you can do is to charge the laptop (or cell phone, camera etc.) and once its charged, pull the plug. Your battery will thank you for it.As a matter of fact, if you own a Lenovo Thinkpad, you can actually change the state of charge to which you charge the battery using the Battery Maintenance utility. You can change this from charging to 100% state (where the voltage is 4.2V) to 90% so that your voltage is less. You lose some energy is doing that, but atleast you can change it to 100% when you need battery power and put it back down to 90% when you can plug in. I wish my Mac has the same feature.
I typically use the battery for a while (say 1/2 hour to 1 hour), then plug it in and wait to fully charge it, then I pull the plug and use it again for 1/2 hour to 1h and then I repeat this. Takes some getting used to and I forget to do this, but I try.
Just installed 9.10 followed by a 10.04 upgrade (wouldn't work as a 10.04 clean install). The install and upgrade all seemed to go well.
But now when booting I get a message saying "checking battery state" and then it boots no further. This is a laptop without a battery installed, running permanently from the mains through the charger.
How can I disable this check so that the laptop will still boot without a battery fitted?
Recently I installed FC 11 on my laptop. The OS is not displaying the battery status correctly in the notification area. if I remove the power cord after 100 % charging, the status remains the same even during discharging. It never informs me the correct discharge status or any warning when the battery power is critically low. This is causing unexpected shut downs and data loss to me. Is this a bug ? Do we have a solution for this. My laptop is Compaq CQ40-327TU; dual boot with Vista as alternate OS.
View 5 Replies View RelatedHow do I check the state and health of the laptop battery. In Ubuntu it was just a simple task of clicking on the battery icon on the task bar and your info would come up. With Fedora 13 nothing happens..
View 2 Replies View RelatedI have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find.
View 4 Replies View RelatedMy battery Icon dosn't showup.
I did
Code:
I recieve back
Code:
Traceback:
And I also did
Code:
i have a problem when using the yum gui it hangs at 1/3 of the process meter and wont budge no matter how long i leave it , using terminall everything works fine and fast but i would like if the gui is fixed its alot easier when searching for a suitable software
View 4 Replies View RelatedWhen I am working with Windows OS on the DELL-Vostro-1014 laptop the battery is working. If however I switch to Debian Squeeze OS the battery does not work. Running #hardinfo & shows that there is no battery. Am I right in assuming that the driver for the battery?
/sys/class/power_supply/BAT0 gives
model_name DELL X612G0
Serial No. 18069
manufacturer LG
What driver is needed, where to search for it and how to incorporate in the kernel 2.26.32-5-686 ?
I need a way to kill my battery in my Ubuntu laptop. Is there any mind numbing tasks I can Ubuntu do that will eat up the battery? I have already shut off the power management options. The battery is giving my issues and and someone said I should discharge it fully an recharge it from 0.
View 2 Replies View RelatedSince I had updated to Lucid, I'm having some trouble with running my laptop on battery. It usually turns off when the battery notifier is still at 13%~18% (it is not shutting down, it is like when your battery runs out of energy). First I had thought that was a problem with the notifier and I was missing when the battery had no charge, but I kept looking at the notifier and suddenly when it had reached 15% my laptop just went down, without saving any job.
I've just upgraded to Lucid Lynx, running on a HP Pavilion dv4-1123us with 2.00 GHz Intel Core2 Duo T5800, 4GB RAM.
The battery is a 6-cell Lithium-Ion that came with the laptop.
I'd bought it about 1 year ago.
my laptop battery capacity has gone low due to constant charging or whatsoever reason. previously it was at 62% and within 2 months its gone down to 32%. I use the laptop atleast for 18hrs every day. so is ther any solution to prevent my battery from losing the capicity.
i use dell studio 15 laptop, with 3 gigs of ram, lithium ion battery(56Wh), ati card, using compiz, p8600 processor. i use this for app development and for listening to music and videos.
Over the past few weeks I've noticed that my laptop battery is dieing VERY fast. I have no idea what is causing this, and I haven't changed anything.
View 6 Replies View RelatedI would like to display my battery into conky for my laptop, do you have /proc/acpi/battery/BAT0 ? - I cant find it
View 1 Replies View RelatedSo I've been using Ubuntu on a Toshiba L645d, and after a few hiccups with the sound and wireless, it's finally working well now. However, the battery is still a bit less when compared to Windows 7 (2:00 vs 2:35, but it came with optimizations on W7 so that might be the reason. A comparison of power used: 25w of power on Ubuntu vs 17.5 on W7.
View 2 Replies View RelatedI've got a problem with my laptop and I finally decided to try to solve it. My computer sometimes (not everytime) freezes. It's just when I'm using battery power. I figured out that this is not connected with some specific action (e.g. some app crash), it can freeze 1 minute after start or 10 minutes, I think it's random. I've checked my /var/log/messages.log file and these are the last messages before freeze (exactly at 9:16:15):
Code:
Jun 1 07:16:09 localhost rtkit-daemon[2170]: Successfully made thread 3472 of process 3472 (/usr/bin/pulseaudio) owned by '120' high priori$
Jun 1 07:16:09 localhost rtkit-daemon[2170]: Successfully made thread 3473 of process 3472 (/usr/bin/pulseaudio) owned by '120' RT at prior$
Jun 1 07:16:09 localhost rtkit-daemon[2170]: Successfully made thread 3474 of process 3472 (/usr/bin/pulseaudio) owned by '120' RT at prior$
Jun 1 07:16:09 localhost rtkit-daemon[2170]: Successfully made thread 3475 of process 3472 (/usr/bin/pulseaudio) owned by '120' RT at prior$
Jun 1 09:16:09 localhost gdm-simple-greeter[3481]: Gtk-WARNING: gtkwidget.c:6794: widget not within a GtkWindow
Jun 1 09:16:09 localhost gdm-simple-greeter[3481]: WARNING: Unable to read from file /etc/arch-release
Jun 1 09:16:09 localhost gdm-simple-greeter[3481]: Gtk-WARNING: gtk_widget_size_allocate(): attempt to allocate widget with width -47 and h$
Jun 1 09:16:11 localhost logger: ACPI action undefined: BAT1
I'm using Arch Linux x64, Gnome Shell and have the newest updates.
What's wrong with my laptop? Where should I look for errors?
I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the Internet that I could find.
View 5 Replies View RelatedI managed to install Jessie on my new Lenovo Ideapad 100 and have been trying to put the finishing touches on it. I downloaded FDPowermonitor and the icon showed up right away. Then after a few minutes it went away and hasn't shown back up.
I think I need to modify /etc/xdg/lxsession/LXDE/autostart to include @fdpowermon but I cannot figure out how to have the permission and use a editor I understand.
I just log into LXDE with root... but there has got to be a better way yes? But that didn't work anyway...
whenever i restart my laptop my battery icon disappears from the panel.
compaq c785tu
When I'm running the laptop on battery the desktop freezes. It doesn't matter what program I use, it also happens when I just boot the system login and do nothing. I then have no mouse, no keyboard - so no key combination works. The only thing I can do is turn the laptop off using the power button and turn it back on. Usually the desktop freezes with in 5 min after login, but I also had one case were I was able to work for about 2 hours. When I plug in the power supply everything works fine.
View 2 Replies View Related