Fedora Installation :: Process Hangs On File 841of 1091?
Aug 8, 2009
New to linux. Trying it out on old laptop. First effort to get off MS OS. Toshiba satellite, celeron processor. Probably around 5 years old. Not sure about the rest of the specifics. Downloaded fedora 11, i386 version for DVD. Performed the media check at the beginning of the install (passed). 3 attempts to install so far. Begins without issue. Gets to installing file 841 of 1091 and just hangs. First time it was file # 831. Have let it sit for as long as 7 hours before shutting off power. Do I need to start with earlier version? Would like to confirm before I spend a bunch of time on downloads and burning disks.
View 11 Replies
ADVERTISEMENT
Dec 28, 2009
I'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]
After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.
View 2 Replies
View Related
Jun 24, 2010
I tried to run Fedora 13 from a live CD on my old HP Pavilion a375c desktop (512MB RAM,3GHZ CPU,160GB Hard drive). The installation CD boots, shows the Fedora hourglass, but hangs when the hourglass is filled. I have used the same CD on a Lenovo Thinkpad T61 and a Dell desktop with 512MB memory without any problem. So the problem seems to be on the HP side. I've also tried to boot with CDLinux and Ubuntu live CD on the HP machine. All have the same symptom - hangs at the end of the hourglass during boot. Anything I can do to pass this stage? The HP spec is here: [URL].
View 8 Replies
View Related
Oct 20, 2009
I am trying to install Fedora 11 from a DVD. Not the live DVD, the full DVD and it hangs constantly. I had to wait 10 minutes for it to Find Storage Devices, 10 minutes to input a root password and now I am waiting for the drive shares to be setup. It's already been 10 minutes. I verified the disk and everything was fine. Why is this taking so long?
View 4 Replies
View Related
Dec 18, 2010
i have a problem when using the yum gui it hangs at 1/3 of the process meter and wont budge no matter how long i leave it , using terminall everything works fine and fast but i would like if the gui is fixed its alot easier when searching for a suitable software
View 4 Replies
View Related
Dec 9, 2010
I installed Ubuntu in my PC alongside winXP. I downloaded the ISO and mounted it using a virtual image software (PowerISO used in winXP). I installed Ubuntu using wubi in a 20GB partition. During installation it asked me how much space should I give, I gave it 11gb. Everything went fine. I rebooted but now the computer hangs during startup. I went to verbose mode to see what the error is and found out that everything is ok. The last line that apears is "Setting sensors limit [OK]" and then nothing happens. I have tried every option (safe graphic mode/ demo mode etc etc) but the computer hangs.
View 1 Replies
View Related
May 28, 2010
I am unable to complete the installation of Slack 13.0 on a new machine with Intel DH55HC motherboard and Intel Core i5 750 processor. The installation proceeds smoothly until the 3'rd CD and then hangs at the FONTCONFIG UPDATE stage. The hung process is apparently rescan-scsi-bus which reaches this stage
"Scanning host 6 channels 0 for SCSI target IDs ....
"Scanning for device 6 0 0 0...
"NEW:
It is not possible to kill this process even with "kill -9". I have to kill the parent process which is Slack setup, so the installation is incomplete. There is another recent thread on this issue [URL] but it did not resolve my problem. How to correct or bypass this difficulty (maybe another kernel? I use the default).
View 5 Replies
View Related
Apr 16, 2011
I'm currently trying to install ubuntu but the installation process hangs on the second page of the installation (right after select language) I am booting from a usb. NO other OS is installed and I'm currently in "try it now" mode.
View 4 Replies
View Related
Jun 24, 2010
I have a PXE server which installed DHCP TFTP AND NFS service. and set them up followed by [URL].
The boot process hanged here:
ipconfig: eth0: SIOCGIFUNDEX: No such device
ipconfig: no devices to configure
[-n eho]
. /tmp/net-eth0.conf
/init: line 3: can't open /tmp/net-eth0.conf
...
What I did try to work around is,
1. Set portfast to all the ports connected the PXE server and client.
2. Edit pxelinux.cfg/default, try different setting in "ip=" (I did not find any menu in the internet which explain to to configure this file).
View 9 Replies
View Related
Sep 4, 2010
Ever since the kernel update to 2.6.34.6-47.fc13.x86_64, my boot process hangs at about startx time. I boot cleanly at runlevel 3 in either this or the previous 2.6.33.8 kernel. If I execute startx from here (in either kernel), the system hangs at the same place. During the early troubleshooting, I read in another thread (250929) about installing xorg-x11-drv-catalyst, which I did using yum. This led to the failure of the 2.6.33 kernel; yum remove did not fix this. I have carefully followed the instructions in the fglrx HOWTO (updated a week ago by Hlingler) as they relate to a PAE kernel (including reinstalling mesa-libGL), and that fixed earlier difficulties. Hence, I felt I needed a new thread.
dmesg tells me
Code:
microcode: CPU0: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Linux video capture interface: v2.00
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
microcode: CPU1: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 .....
But the program itself reports
Code:
# microcode_ctl -h
This program is for updating the microcode on Intel processors belonging to the IA32 family - PentiumPro upwards (x86-64 included). It depends on the Linux kernel driver. The website urbanmyth.org/microcode (mentioned by yum info microcode_ctl) clearly indicates that Intel has taken over this microcodecode distribution, and suggests that it is no longer valid for AMD processors.
I found a reference to a kernel configuration flag CONFIG_MICROCODE_AMD (as a plausible subsititute for CONFIG_MICROCODE_INTEL) that possibly belongs in a script in /etc/init.d - but the above context leads me to suspect this is not true any more. In any event, those flags are not mentioned anywhere in my init.d scripts - in fact nowhere in the entire /etc tree. My microcode file exists, and is dated March 23. How do I get it installed? Or is this completely unrelated to my hanging boot problem, as suggested by the "platform microcode" line in the dmesg output? If so, where should I be looking?
View 4 Replies
View Related
Nov 11, 2010
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies
View Related
Feb 10, 2011
I have a process A running in the background. When I start another process B also in the background, the system hangs the moment I hit any key. Process A and B communicate over a socket. Iam not even able to do a telnet to the system. Is there any precautions that I need to take while running in background
View 1 Replies
View Related
May 23, 2011
It goes through the kernel boot up, and the icon with the circle and keyboard. Then it stays on a blank screen with a large courser on the upper right corner. Then the courser becomes small. It sits their for a long time. Then the screen to boot or install comes up, and everything works fine. It hangs during the configuration process. I am unable to skip. I think it hangs during the kernel config.
I click on the drop down arrow and see the fallowing:
ubuntu ubiquity : update-initramfs: generating /boot/initrd.img-2.6.38-8-generic
My pc set up is as fallows:
Asus M2N-MX SE Plus
AMD Athlon64 X2 5000
A sata samsung lightscribe dvd
A IDE Western Digital HD (Do not know what model)
NVIDIA GeForce 9500
It is from a downloaded burnt copy. The md5 is good. I burnt it at a slow speed. I do have a known good 10.10, but it starts out exactly the same.
View 9 Replies
View Related
Jan 8, 2010
one tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies
View Related
Feb 22, 2010
after doing: $ sudo apt-get update i get lots of hits then: Hit [URL] pdates/multiverse Sources 99% [Waiting for headers]... and it just sits there. a reload in synaptic gives: downloading file 44 of 45 ... and it just sits there.
when i abort i get the following shown in error message: Failed to fetch http://dl.google.com/linux/deb/dists...tion-en_GB.bz2 Failed to fetch http://dl.google.com/linux/deb/dists/stable/Release Some index files failed to download, they have been ignored, or old ones used instead.
View 7 Replies
View Related
Mar 29, 2010
recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:
Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.
Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.
View 1 Replies
View Related
Oct 31, 2010
Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.
View 2 Replies
View Related
Dec 7, 2010
I have a NFS server and I'm periodically cleaning the cache by using the following lines:
Code:
/bin/sync; /bin/echo 1 > /proc/sys/vm/drop_caches
/bin/sync; /bin/echo 2 > /proc/sys/vm/drop_caches
during the last days the cleaning process gets stucked at '/bin/echo 2', here's the process data:
Code:
27426 root 20 0 5488 704 576 R 100 0.0 896:06.34 /bin/echo 2
the process keeps running, so I find this more strange since it's not in zombie or D state.
View 2 Replies
View Related
Jul 23, 2011
My program is creating 4 threads per transaction. Threads doing nothing but simply sleeping.
Now, when transaction ends, I want to wake up all the threads from sleeping. For this I am using pthread_kill() to wake up the threads using signal SIGUSR2.
Problem raises when I put more transactions(eg. 100 trans). My process gets hangup.
View 3 Replies
View Related
Feb 9, 2011
I have 3 processes to be executed in a particular sequence.
ProcessA
ProcessB
ProcessC
The requirement is that all the processes should run as background processes.
ProcessA talks to ProcessB and ProcessC using sockets.
ProcessB talsk to ProcessA only using sockets.
ProcessC talsk to ProcessA only using sockets.
[Code].....
View 3 Replies
View Related
Jul 13, 2010
When my system boots it hangs at
Code...
and hangs for another 120 seconds. In X11 I have no sound at all even after running alsaconf with no errors. My sound works perfectly in Ubuntu, so it's not a hardware problem. Are the two problems related or are they two separate things? Any help here would be hot.
View 10 Replies
View Related
Dec 7, 2009
I have a many process running in my machine with similar command and the command is 'gzip'. It is running by a program in a file. How will I find out the file which is behind this command.
View 4 Replies
View Related
Oct 26, 2010
I just installed Maya 2009 on Fedora 13.It seemed to run the RPM install fine, but when I go to Applications > Graphics > MayaI an error:Could not launch 'Autodesk Maya 2009 (64-bit)
Failed to execute child process "/usr/autodesk/aya/bin/maya"(no such file or directory)I browsed to this location in the file browser and there definately is a file called maya in "bin"
View 1 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
Dec 2, 2010
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
View 4 Replies
View Related
Feb 3, 2011
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
View 3 Replies
View Related
Jan 10, 2009
I'm trying to install Fedora Core 10 on a PC when I installed FC 3 two years ago.I selected "Memory Test" (100% ok) and then "Boot", I passed the first white progress bar (the one appearing at the bottom of the screen), but the installation hangs (The mouse pointer stops) and I cannot continue.
View 2 Replies
View Related
Jul 6, 2009
- Press the <Enter> key to begin the installation processisolinux: Disk error 80, AX=42BA, drive 94Boot failed: press a key to retry
View 4 Replies
View Related
Sep 30, 2010
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies
View Related
Apr 20, 2009
I want to install fedora 10 on my PC. But after booting from DVD a screen comes which tells me to:
" - to install or upgrade in graphical mode, press the <ENTER> key - use the function key listed below for more information [F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]"
when I press "Enter" nothing happens, even the function keys does not work & after some time PC restarts. The DVD is ok I have checked it in my friends PC, it works on his PC very well. My PC configuration is:
Precessor : Core 2 Duo 2.20 GHz
Ram : 1 GB
Hard Disk : SATA 160 GB maxtor
OS : Windows XP service pack 2
BIOS Version/Date:Intel Corp. NL94510J.86A.0010.2007.0523.1650, 5/23/2007
I have tried to install fedora 10 in "virtual box 2.1.4" but the result is same.
View 2 Replies
View Related
