Fedora :: What Is /etc/init.d/ntpdate
Sep 9, 2009
I saw that there are 2 NTP services in /etc/init.d:
/etc/init.d/ntpd - the NTP daemon
/etc/init.d/ntpdate - what is this ? and what is the relation between the 2 services?
I mean... if there is ntpd to do all the clock sync, what is ntpdate's role?
View 3 Replies
ADVERTISEMENT
Aug 17, 2010
I have a boot problem. Is this just a kosmetic problem or is the syncronisation not working?
[Code]....
View 2 Replies
View Related
Jan 1, 2011
I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem.
It failed to boot and got this message: no init found. try passing init= bootarg
The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.
View 2 Replies
View Related
Jan 20, 2010
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
View 9 Replies
View Related
May 11, 2011
ntpdate give err. ntpdate -q 10.3.71.11 server 10.3.71.11, stratum 0, offset 0.000000, delay 0.00000
11 May 15:10:56 ntpdate[21183]: no server suitable for synchronization found
View 2 Replies
View Related
Jan 12, 2010
i like to ask something regarding network time protocol.... if i use "ntpdate [URL]"..it shows the time synchronized with [URL]. but if i want to reset my time should i use 'ntpdate' only or another command?
View 1 Replies
View Related
Jul 10, 2010
I use CentOS release 5.3 (Final)I want centos to automaticaly run ntpdate each time the pc boots, how can I do that ?(I do not boot to KDE, just to plain konsole if that matters)
View 5 Replies
View Related
Oct 18, 2010
I'm attempting to install ntpdate on Debian etch and am getting the following errors
# apt-get install ntpdate
Reading package lists... Done
Building dependency tree... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
[Code]...
View 5 Replies
View Related
Jun 29, 2010
I'm trying to sync the clock of an ubuntu desktop with the network with ntpdate -u <ntp-server> and in a matter or minutes it's growing an offset of a few hundred milliseconds and even more than one second. Is there anyway to guarantee that the time keeps synchronizing with the network more frequently? does it make sense that the offset grows so fast? Am I doing something wrong?
View 3 Replies
View Related
Nov 14, 2010
I have RHEL 5 joined to windows Domain and lately has been delaying in time like 20 - 30 mins off the domain controller. Any ideas why? It suddenly started this delays. I have to login and restart ntpd in order to sync and so users can login. Here is the output of ntpq -p:
[Code]....
I wonder is the * means that its syncing with itself? if yes how to make it to sync with my remote server dc1 (2nd line?)
View 3 Replies
View Related
Jul 29, 2010
me the difference between /etc/init.d scripts and /etc/init.d/rc?.d scripts.
View 3 Replies
View Related
Apr 19, 2010
I'm trying to synchronize a client with an ntpdate server. The ntp.conf file from the server has the following lines: # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
[Code]...
View 1 Replies
View Related
Nov 18, 2010
Can I use ntpdate after http servers and how? I use Ubunto 10.04 64bits.
View 1 Replies
View Related
Sep 17, 2010
I have written an init script and placed it in /etc/init.d/ directory.What I would like to know is, will the script run automatically or we need to install the script using "install_initd" command.If I have to invoke this command manullay, what will be the best place to do this ? Can I add this to "/etc/init.d/rcS" file
View 6 Replies
View Related
May 7, 2011
I'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
View 3 Replies
View Related
Mar 17, 2011
openSUSE 10.3 on Itronix IX260+ Stuck on command line, init 3, and all attempts at graphic init 5 fail. Get these messages:(EE) No devices detected; Fatal screen error: no screens found; AIGLX disabled Primary Device is PCI 01:00:0kernel:device-mapper:multipath round-robin:version 1.0.0 loaderkernel:device-mapper:table:253:0:multipath: error getting device
kernel:device-mapper:ioctl: error adding target to tableProblem would seem to be with the device-mapper, but have no idea how to fix it.
View 3 Replies
View Related
Jan 31, 2011
While I was using my computer a few days ago, the terminal stopped working properly, so I tried to reboot, and when it started up again it wouldn't boot and said "no init found. try passing init=bootarg"
This has happened twice before, so I really need to figure out what keeps happening, otherwise I can't continue to use linux. i reinstalled both times before. i think that this is caused by a process that prevents me from using the hard drive, because when I try to check the disk in the terminal or in gparted, it says Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program?
Also, in the disk utility, in the lower right corner of the filesystem it has a spinning "loading wheel".(i'm not sure if that means anything)
I am using ubuntu 10.10, but am not sure what kernel I am using, but i tried a few different kernel options(there's three of them at start up). safe mode does not work either.
View 3 Replies
View Related
Apr 19, 2011
Im am building a Linux distro. It will be very tiny and fast.
I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.
The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.
When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.
The kernel works OK with others initramfs/initrd files. But not with my own.
Quote:
Here is how the end of the kernelcomplie look like.
Quote:
Here is my init file who is the initrd/initramfs source.
Quote:
The initramfs folder contains "bin" (folder) and "init" a file. No more.
The problem is that the kernel cannot find/read init file.
View 4 Replies
View Related
Nov 2, 2010
I can't update my ubuntu clock with my server. If i run the command ntpdate domain.local, it gives me this erro (no server suitable for synchronization found) if i run the command nslookup domain.local it works well and found my server
View 3 Replies
View Related
Jun 19, 2009
Lately I've been trying to install the Nvidia Cuda driver for Linux.In order to do this, I have to tun a .run file. When I run it in the console, It says that I can't install when running the X server. So I try to use "init 3".When I type it, and hit enter, the screen goes black, no blinky cursor thing, just a frozen black screen. I followed one of the nvidia tutorials on here to get the normal nvidia driver, and it worked successfully.Before I installed the nvidia driver, when I would use "init 3" I would get a colourful console window with random coloured blocks of random lettering. It seems that installing the nvidia form the tutorial turned this into a black screen.
View 4 Replies
View Related
Nov 11, 2009
im just stating in fedora..why does i cant restart/start/stop my /etc/rc.d/init.d/smb ? actually i notice that there are no "smb" or "samba" file exist in my /etc/rc.d/init.d/ or in /etc/init.d/
and there is no smb or samba found in my /sbin/chkconfig but i have my samba installed. Im using fedora 10
View 2 Replies
View Related
Jul 14, 2010
This is a minor annoyance, but I'd like to know how to fix it... When starting Fedora 12 with KDE, the KDE icon is twice the size of the other icons. I figure it is easy to make it the same size as all the other icons, but I don't know how. If this seems confusing, I am referring to the screen that appears after you enter your password and before the KDE desktop appears. A set of icons appear one at a time. The KDE icon is clearly twice as large as the others.
View 4 Replies
View Related
Aug 11, 2010
difference between init and telinit?
View 2 Replies
View Related
Jan 22, 2011
I am trying to install a new NVIDIA Driver. as I usualy do I go to a terminal logging off and using "ctrl+Alt +F2" logging in as root and entering "init 3" but when I run "sh NVIDIA" it tells me "X server is still running." If I enter "init 5" it goes right to a gui. I have tried "killlall X11" with no results.
View 7 Replies
View Related
Apr 15, 2009
su to root,
init 3
no errors, no nothing acts like it take the command, but nothing happens.
trying to install nvidia drivers which won't run unless all the xwindows are shut down.
View 4 Replies
View Related
Aug 27, 2009
We have a virtual XP machine on our fedora 11 install. I want to drop fedora 11 down to init3 (since its a server anyway) and everyone is worried about the windows virtual machine dying. What would happen to my windows virtual machine if I drop the host server to init 3?
View 1 Replies
View Related
Jun 24, 2011
I upgraded to Fedora 15 using preupgrade after I failed to upgrade or install it clean through DVD. But, after the preupgrade process finished, I can't boot my system even into init mode 3. I am able to boot into the init mode 1 and can see that many of the packages have been upgraded to fc15. I tried to start the x server from init mode 1. My nVidia screen even popped up. But after that the screen went totally blanked.
View 6 Replies
View Related
Aug 3, 2011
I would like some quick pointers to understanding service-daemon controlling and etc/initd.conf or /etc/xinetd.conf, if you prefer. read, a while back, I should be using...
[bash]# service "srv-dmon" start/stop/status/restart/reload/etc
and to stop using...
[bash]# /etc/init.d/"srv-dmon" start/stop/status/restart/panic/save/etc
[code]....
View 2 Replies
View Related
Feb 25, 2010
I have a service that when shutdown requires a username and password. I use `read` in my script to gather this info because I can't have it in the file. When I run the init script by hand it will ask for the username and password and everything shutsdown properly. When I run reboot or halt I get no prompt. get user input in a shutdown process?
View 2 Replies
View Related
Jun 4, 2010
I was having a job in /etc/event.d. It was working fine upto FC12. With upgrade to Fedora 13, it stopped working . Searching the internet, It looks like /etc/event.d is obsolete and I need to use /etc/init. Also the filename has to have a '.conf' extension. So I have renamed my job as /etc/init/svscan.conf.However, it fails to start automatically on reboot . It works if I manually issue the command % sudo /sbin/initctl emit qmailstartBut fails to start automatically on reboot. Is there anything wrong in my script below ? Let me know if I have missed out anything?
% cat /etc/init/svscan.conf
# svscan - runlevel compatibility
# WARNING: This file was auto-generated. Do not edit!
[code]....
View 4 Replies
View Related