I'm trying to sync the clock of an ubuntu desktop with the network with ntpdate -u <ntp-server> and in a matter or minutes it's growing an offset of a few hundred milliseconds and even more than one second. Is there anyway to guarantee that the time keeps synchronizing with the network more frequently? does it make sense that the offset grows so fast? Am I doing something wrong?
View 3 Repliesntpdate give err. ntpdate -q 10.3.71.11 server 10.3.71.11, stratum 0, offset 0.000000, delay 0.00000
11 May 15:10:56 ntpdate[21183]: no server suitable for synchronization found
i like to ask something regarding network time protocol.... if i use "ntpdate [URL]"..it shows the time synchronized with [URL]. but if i want to reset my time should i use 'ntpdate' only or another command?
View 1 Replies View RelatedCan I use ntpdate after http servers and how? I use Ubunto 10.04 64bits.
View 1 Replies View RelatedI've discovered Firefox Sync a while ago, and it's absolutely awesome. Now of course I'd like most of my software to work this way! So is there a way to get the same behavior with Thunderbird?
View 1 Replies View RelatedWe have quite a few SEO clients who require multiple IPs which are all from different class c allocations. (10 - 50 IPs) used for projects lasting weeks to months at a time. Since we don't have connected IPs in ranges we can't use the range scripts but I don't know of a way to easily add a long list of individual IPs. These are CentOS servers, by the way
View 2 Replies View RelatedI'm looking for a way to quickly remove all data/partitions/boot records from my hard drives while running linux (distribution is irelevant). There are lots of ways to do this that I know of, but they all have some problems. Here's a list of what I've tried/thought of already. The most obvious is fdisk: Simply delete all the partitions. This usually works just fine and is very quick, but there are times it just doesn't....I'm realy not sure what gets left behind...I remove the MBR as well..but whatever it is, it's in the way. A couple other options are:
dd if=/dev/zero of=/dev/sdb bs=1M
shred -vfz -n 1 /dev/sdb
Both of these approaches are great if you're selling the components and want to make it very difficult for anyone to recover data. The draw-back is they take so very long to run. I've got four 1.5 TB drives that I've been writing zeros to for 2 days now. If you thought watching grass grow or paint drying was boring. A hundred years ago or so, when I was doing tech support for Windows 95 users we used this nifty dos-based debug script to wipe the hard drive. It was sort-of a last resort thing, but it worked beautifully, most of the time. If the customer had already formated, fdisked, fdisk /mbr, reinstalled Windows, but still couldn't get the thing to work, this would clean the drive so you could do a fresh install.
Just in case someone wants this, I'll post it. To use: first boot to some type of DOS environment in which you have the program "debug".
debug
-F 200 L1000 0
-A CS:100
xxxx:0100 MOV AX,301
xxxx:0103 MOV BX,200
xxxx:0106 MOV CX,1
xxxx:0109 MOV DX,80
NOTE: Type 80 for the primary hard drive - HD 0,
or type 81 for the secondary hard drive - HD 1.
In most cases, the primary hard drive is required 80.
xxxx:010C INT 13
xxxx:010E INT 20
xxxx:0110 (Leave this line blank. Press the <Enter> key to continue.)
-G
The message Program terminated normally appears. How to do something like that while running linux?
I want to be able to connect these machines to the domain and use active directory on them.
View 2 Replies View RelatedI saw that there are 2 NTP services in /etc/init.d:
/etc/init.d/ntpd - the NTP daemon
/etc/init.d/ntpdate - what is this ? and what is the relation between the 2 services?
I mean... if there is ntpd to do all the clock sync, what is ntpdate's role?
I use CentOS release 5.3 (Final)I want centos to automaticaly run ntpdate each time the pc boots, how can I do that ?(I do not boot to KDE, just to plain konsole if that matters)
View 5 Replies View RelatedI have a boot problem. Is this just a kosmetic problem or is the syncronisation not working?
[Code]....
I'm attempting to install ntpdate on Debian etch and am getting the following errors
# apt-get install ntpdate
Reading package lists... Done
Building dependency tree... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
[Code]...
I have RHEL 5 joined to windows Domain and lately has been delaying in time like 20 - 30 mins off the domain controller. Any ideas why? It suddenly started this delays. I have to login and restart ntpd in order to sync and so users can login. Here is the output of ntpq -p:
[Code]....
I wonder is the * means that its syncing with itself? if yes how to make it to sync with my remote server dc1 (2nd line?)
I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
I've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I'm trying to synchronize a client with an ntpdate server. The ntp.conf file from the server has the following lines: # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
[Code]...
I can't update my ubuntu clock with my server. If i run the command ntpdate domain.local, it gives me this erro (no server suitable for synchronization found) if i run the command nslookup domain.local it works well and found my server
View 3 Replies View RelatedIt seems that selinux has stop weav to sync the bookmarks.I followed the fix code as SELinux suggested,but it can't work.Does anyone know how to solve it?
View 3 Replies View RelatedUsing a GUI file browser, I would like to be able to mark files with an emblem or something similar as quickly as possible, with a single click. I'm currently using Gnome Nautilus in my Ubuntu 10.04, which doesn't seem to offer the functionality. I'm not keen on trying the extension Nautilus-Actions as it doesn't seem to be open source. I've set up some scripts though, but accessing them through the pop-up submenu is just clunky enough to still have me searching for a faster solution. Does a file browser exist that would let me set up a toolbar button for marking files? Or a button for launching scripts, which would amount to the same thing.
View 2 Replies View RelatedIs there a quick way of saving the active threads of this forum, so that, I can read them later on without an internet connection?
View 1 Replies View Relatedwhen i play a song in banshee, or a videos video, i get no sound at all. however, in banshee 1 3 minute song will appear to play in about 20 seconds (the progress bar speeds along), and videos videos play back in ultra-fast motion with no sound. weirdly, when i go to system settings -> multimedia, and click test on the default sound device, the kde login sound plays back fine. this worked when i first installed; does anyone know what's going on here? i think it may be a problem with gstreamer?
View 1 Replies View RelatedOver the past few weeks I've noticed that my laptop battery is dieing VERY fast. I have no idea what is causing this, and I haven't changed anything.
View 6 Replies View RelatedI'm running badblocks on some new disk drives just to be safe before my return period expires. I'm running the command
Code: sudo badblocks -b 4096 -p 4 -c 65536 -w -s /dev/sdb1 on an empty partition taking up the entire device. I am getting the following output:
[Code]...
1) When it gets to the "reading and comparing" phase, it seems to complete in <1s. I see other posts where people say this takes them as long as it took to write to the drive. I don't see any mention of this being quick, so I'm just afraid that badblocks is being denied read access or something.. Anyone familiar with this behaviour?
2) Obviously since it is on a sixth pass, badblocks thought that it found new bad blocks on the second pass (or later). When I check SMART, though, the drive has not re-allocated anything (despite having plenty of spares)... Doesn't this seem odd? Is there some reason why the disk would not step in upon a write fail? In fact, I thought a write fail should be transparent... Which makes me wonder if question 1 (above) is causing this...
I need to view 10.858 text files by this friday to see which ones I need (searching file contents is not a solution), I was wondering if anyone knew any way/program to quickly view them as if they were, for example, images? And, optionally, to be able to save them to a different location from there? It doesn't necessarily have to be for Ubuntu as I also have WinXP and Vista, but it would save me having to transfer those couple of gigabytes to another computer.
View 3 Replies View RelatedUbuntu 10.04 - when I logout I get screenful (at least) of messages all with the same format. They disappear too quickly to see what they're about. I've looked at the logs but can't see anything like what I see on the screen. Is there any way I can find them?
View 2 Replies View RelatedI bought a new Hp Pavillion DV6T. For the most part, everything worked right out of the box with ubuntu, but the computer seems to be heating up really quickly for no reason whatsoever even if I'm not doing anything intensive. Why this is happening. The fan always seems to be running at full blast. I logged onto windows for a minute to see if there was any difference in heating between the two OSs and windows seems to run much cooler and much more quiet. On a side note I'm thinking of returning the HP and buying a dell XPS 15. I hear they are more compatible with ubuntu and are better built.
HP Pavillion DV6t
ATI Radeon 6570 1 GB graphics card
Intel I7 2.0GHZ quad
So I am prompted in desktop for updates, but no information is given about the size of the packages involved. Sometimes, I don't like to wait too much for the dowload or to update packages which are too large.
Any settings dealing with that, so the individual size and the total per groups (security updates, etc) would be show without going in yum?
After dual booting into Windows to play Mass Effect 2, I hit the windows key by mistake, and the screen quickly turned black! Since then, I couldn't boot into Fedora, nor Windows; not even Fedora's linux rescue. I see the GRUB, I hit enter on any one of the two options, and all I see is a black screen!
View 3 Replies View RelatedI keep losing my Internet Connection(DSL) very quickly. Usually after a couple of minutes, it's absolutely unpredictable. And then, it gets difficult to reconnect. And if I succeed in reconnecting, I again lose the connection quite quickly.
Here are some logs from the ifcfg-dsl0.log code...