su to root,
init 3
no errors, no nothing acts like it take the command, but nothing happens.
trying to install nvidia drivers which won't run unless all the xwindows are shut down.
What a nuisance after upgrading from Fedora 12 to Fedora 13 the terminal initialisation and the running of agetty agetty doesn't work any more. Same for printer configurations. Apparently this should now be done in /etc/sysconfig/init but where is the documentation? how to use the new /etc/sysconfig/init to do what the event.d scripts used to do.
View 2 Replies View RelatedI can't get Ubuntu to boot. The computer isn't actually mine so I don't know exactly what happened, but I think an update went badly wrong...
Anyway, whenever I try and boot Ubuntu, i get this
Code:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init
No init found. Try passing init= bootarg
(and then something about initramfs) I've been trying to find out what the error is on the forums, and I think it could be to do with grub not being able to find something, but I really don't know because I don't understand exactly what's going on.
I can load the grub menu, but I can't boot Ubuntu from there. Also, I can't run or install Ubuntu on a live usb because it just hangs at the Ubuntu loading screen.
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
Nvidia either works or it doesn't work under Fedora 10 64 bit OS. I have re-installed Fedora 10 64 bit and Fedora 11 64 bit 10 times each and it's getting real old. I keep erasing my system because Nvidia doesn't want to work. Leighs post does no good on this issue and neither does anyone else's or else it would work.
View 2 Replies View RelatedFedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
I have:
AMD Phenom 9650 Quad-Core Processor
nVidia GeForce 9500 GT graphics card
dual monitors
I installed F11 from the DVD iso. The nouveau driver seemed to work and I could get both monitors working with xrandr.
Then I tried to install the nvidia drivers. I installed akmod-nvidia.
They didn't work. I got this in my /var/log/Xorg.0.log:
Quote:
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
[Code].....
On my PC (fresh FC11 i386 instllataion from CDs), dhclient doesn't work. When it tries to get an IP address with dhclient, it gets No DHCPOFFERS reveived and fails. The ethernet of my PC works fine - I can manually set IP address, netmask, gateway etc. to connect to my persoal Linksys router, but if I change to DHCP, it fails as above. So it's not the problem of the ethernet driver of FC11. I suspect that dhclient of FC11 is buggy. (For the record, DHCP works fine on FC10 and Windows XP with my Linksys router.)
View 1 Replies View RelatedWhy my mouse doesn't work in console?
View 2 Replies View RelatedI have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
I've installed the Awesome WM using "sudo yum install awesome" (as described here https://awesome.naquadah.org/wiki/Awesome-3-fedora ). I can also log into awesome, but nothing works! I can open the menu on the top left of the screen, but when I click on e.g. "Open Terminal", nothing happens. Same thing for all other menu options except "Shut down" which logs me out of Awesome. I've also tried the terminal shortcut, but nothing works.
Has anyone an idea how to make it work?
So I've been trying to install to an iSCSI target for the past two weeks and while the installation finishes, booting doesn't work. I get dropped to a shell after boot installation. I have seen some bugs on red hat bugzilla 705213, but don't know how to resolve it. I'm new to Fedora but really want to embrace the distro
View 2 Replies View RelatedI burned Fedora onto a disk, but when I turn on the system it just goes straight to the Windows XP login.
I thought it was something wrong with the disk or something like that, but when I pop in the disk on my Dad's laptop, the installation for Fedora runs perfectly.
Also, yes, I checked the order for booting and the CD drive comes before the hard drive.
I tried to upgrade to Leonidas from Cambridge, but didn't have enough space on the partition /, so I soft linked /var/cache/yum (or whatever) to a larger partition, but now the upgrade does not find the subdirectory called preupdate (it's there in the linked dir, checked). Is there any more sofisticated way around than changing parition sizes and copying and stuff?
View 4 Replies View RelatedHow to make the mics work on a Dell XPX M1330 laptop. This seems to be a common problem with built in mics on laptops. I've tried all the obvious things with alsamixer and pulseaudio.
View 1 Replies View RelatedFirst: When I try to edit my brightness it doesn't work at all. I can turn the LED on/off but when I do up down it brings up the status bar and nothing changes. Asus K60IJ T4400 is my laptop.
The other 'problem' is the MP3 codec? How do I install this? I'm trying to use my Mp3 files in Rhythm box but can't find out how. =[Why does it have to be different ;(
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies View RelatedI downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedI have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedI've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View RelatedI have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
When I bring down a certain machine with some nfs mounts using init 0, it hangs forever while trying to bring down the mounts, but if I bring it down using halt -p (which I've read just calls shutdown if I'm in init 3), it comes down in a timely manner. I've also read that shutdown still calls all the rc.d kill scripts just like init 0, so what is actually the difference between them? Is it this:
Quote:
All processes are first notified that the system is going down by the signal SIGTERM?Does init not do that? I'm not trying to directly troubleshoot why NFS makes me hang with init 0 at this point, just wondering why shutdown works whereas init 0 doesn't.
I installed Fedora 13 and on my new laptop and tried upgrading to F15 and it gets stuck at "Late init script for live image".I've been searching and seen threads in the F15 Dev forum that I cannot reply to. I do not have akmod or kmod on this machine.I can get to a terminal, I have an SSH Server I installed before it broke. When I press ESC at the boot screen the last thing I see says "Late init script for live image"
View 3 Replies View RelatedHaving trouble booting into Kubuntu originally installed with Wubi.The system returns this error:
Code:
mount: mounting /dev/loop0 on /root failed: Device or resource busy
mount: mounting /sys on /root/sys failed: No such file or directory
[code]....
I've recently installed 10.10 onto my laptop, a Toshiba Equium A-100. It's been working perfectly for the last few weeks, but today I woke up, booted and got this;
Code:
mount: mounting dev/disk/by-uuid/9f8e1fd1-ca75-4eeb-8afc-a6b7bd756180 on /root
failed: Invalid argument
mount: mounting /dev on /root/dev failed: No such file or directory
[code]....
I'm a bit of a linux newbie, and while I can use the system fine, once we get into a shell I'm out of my depth. My laptop is useless now, and, unluckily, my 2000 word end-of-semester submission is on it. No, I didn't back it up because I wrote it last night. Arrgh.
I hope that you will be able to help me. I know that my topic may seem the same as some other threads, but there is a twist and it seems that I can't sort things out. I installed Ubuntu on the family's 4 year old Dell about a year ago when Windows stopped working (too many bluescreens!). It seed to be good, until one day when I tried to boot and it listed some codes on a black screen. I then reinstalled ubuntu from one of my disks, and it worked fine... until the entire thing occurred again a week later. This happened once or twice more, until today's problem:
It won't boot into ubuntu and also has white writing on the black background (read this below). I tried to reinstall from a ubuntu install disk, burned additional install disks, made an install usb, and also tried opensuse. They all say the below message when I try to boot into the disk:
Killed
mount: mounting on /dev on root/dev failed: No such file or directory
mount: mounting on /sys on root/sys failed: No such file or directory
mount: mounting on /proc on root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
[Code]...
My UBUNTU 8.04 server does not boot anymore : here is the error message :Quote:Target filesystem doesn't have /sbin/initPrevious messages on the boot were :Quote:
kinit: name_to_dev_t(/dev/disk/by-uuid/0a301...a8 = md1(9.1)
kinit: trying to resume from /dev/disk/by-uuid/0a301...a8
kinit : No resume image, doing normal boot...
[code]....
I have a Lenovo X60 with Intel Centrino Duo Core @ 1.83GHz 1.83GHz, and 0.99 GB of RAM. I am running a dual boot with Windows XP SP3 and the latest version of Ubuntu desktop. My problem is that after I ran the Defrag my C: drive in Windows, I can into my ubuntu.I was greeted with the following error message when i tried to boot into ubuntu {Target file system doesn't have /sbin/init}
View 2 Replies View RelatedClick here for solution... http://ubuntuforums.org/showpost.php...99&postcount=3So I just realized how stupid I was being trying to run these commands for a NTFS partition... so I searched and used Gparted to check sda2, and also ran
Code:
root@ubuntu:/home/ubuntu# sudo ntfsfix /dev/sda2
Mounting volume... OK
[code]....
Ubuntu has officially jumped the shark. I did an update...restarted and got this:
Quote:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init=bootarg
[Code]....
