Fedora :: Sometimes Sound Is Working And Sometimes Not Working
May 30, 2010
I just upgrade my fedora 11 to fedora 12 using the dvd and upgrade setup. I know that there is Fedora 13 released however now I`m with fedora 12. My problem was with sound. Sometimes the sound is working, sometimes it is not working. Here is the information for my PC:
[code]...
however If i killall pulseaudio or kill -9 PID of pulseaudio, pulse audio starts again and sound is working. I do not know every time when my sound goes off to kill the pulseaudio.
View 5 Replies
ADVERTISEMENT
Jan 14, 2010
What my problem no sound is working on my machine.This is fedora12..I dont know what to do and where to start trouble shoot. For example in mplyer i switched between differnt audio drivers But no hope.
View 7 Replies
View Related
Oct 1, 2009
after a couple of updates... my sound is not working anymore
HTML Code:
alsamixer -c0
volume:ok
HTML Code:
killall pulseaudio
pulseaudio --start
didn't fix the problem (user member of pulse-rt)
View 5 Replies
View Related
Nov 18, 2009
I have just installed the F12 64 on my hp dv7 and nor the sound neither the microphone works. In F11 64 the sound works fine (I have never tested the microphone), as well as in all the Ubuntu most recent versions, but not now in F12 64, which is frustrating (I am a Fedora fan).
I have checked the configuration in Sound Preferences and it is identical to the one shown when I use the Ubuntu 64 liveCD (where both sound and microfone works perfectly), which has exactly the same interface in the recent versions as F12, which I believe that excludes the possibility of an error in the sound configurarion. Am I correct ?
Just a note: I am having kernel problems also, with a constant alert that indicates some incompatibility with the BIOS, with the message of broken BIOS (which was not removed when I updated the BIOS), but I am not sure those are related problems...
View 9 Replies
View Related
Mar 21, 2010
I have Fedora 12 and I am only running ALSA (not PulseAudio) for my sound.[URL}.. It was working fine until one day I noticed I'm getting no sound. There have been countless Fedora updates (prompted by the Fedora updater) so I'm suspecting some update horsed it up somewhere.
So when I go into System > Preferences > Sound it just hangs waiting for the sound system to respond. The sound card works fine because when I dual boot to Windows XP I do indeed get sound and I haven't changed anything since it worked before under Fedora. Everything is unmuted and turned up in my alsamixer settings.
View 14 Replies
View Related
Dec 5, 2009
I am running Skype installed via yum: skype-2.0.0.72-fc5.i586 on F11 x86_64 My sound is working perfectly under VLC etc. but I cannot get anything out of Skype. Test calls produce deafening silence. I am really unclear on how the sound stuff works.
View 2 Replies
View Related
Nov 22, 2010
have installed fedora 14 on HP DX2255M/AX2. Sound is not working.My hardware Profile is boot log
DA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.095485] ------------[ cut here ]------------
[ 7.095495] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[code]....
View 2 Replies
View Related
Aug 5, 2011
I have been troubleshooting for some time but do not manage to get my sound working on FC15. I want to use the integrated sound from my motherboard ASRock 890GX Extreme3 and I am testing it with the headphones on the front output. I noticed I can get sound from the motherboard output on the back (front audio should be wired as well though, it does work in Windows). My ALSA information can be found at: [URL]
View 5 Replies
View Related
Nov 27, 2010
Fedora 13 installed on MacBook Pro laptop. I have no sound emitted from speakers.
[code]...
View 4 Replies
View Related
Jan 20, 2011
With my Compaq CQ62 it seems I can either have a distro provide a working wifi or a working soundcard but not both. I would love to have Linux working properly. Wireless internet works great in Windows 7. The ethernet works perfectly when I plug directly into my router, but pressing the wireless button will not change the light on it from orange to white or do anything else. Yet a simple distro like crunchbang or kubuntu seems to make the wireless work fine.
They just cant make my soundcard work. Being that there is at least some sort of a protocol for installing wireless drivers, I figured I would go with the distro that gives me SOUND since installing a sound driver seems unheard of or impossible. I have a realtek wireless network card in my laptop that Fedora, one of the biggest names in Linux, seems oblivious to even recognize. When I click on the network icon and go to Manage Connections, the Wireless tab is greyed out and cannot be clicked on.
View 14 Replies
View Related
Feb 13, 2011
I have creative blaster sound card after updating fedora 14 the sound is not working properly.
View 5 Replies
View Related
Jun 3, 2011
I upgrade from F14 to F15 and at first everything seemed fine, but now I noticed that sound output over HDMI to my TV is no longer working (this worked fine under F14). the hardware in this case is the onboard sound card of my ASUS M3N-H/HDMI motherboard:
Code:
>lspci:
...
[code]...
View 1 Replies
View Related
Jun 5, 2011
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
View 5 Replies
View Related
Mar 7, 2009
i have a creative sound card installed in my system. But it is not working. What I got is a mono sound output. I also check pulse audio volume control but only mono sound it displayed in the play back tab. i checked sound & volume control in
system-> preferences -> hardware ->sound
system-> preferences -> hardware ->volume control
But no avail it can only play analog front speaker, neither IEC958 centre nor left/right speakers.Actually in this,(F-10) there is no options to check a 5.1 surround sound(which is available in windows explicitly). Can anyone please help me to configure the sound card for a 5.1 surround system?
View 1 Replies
View Related
Apr 30, 2010
I have a PC with Fedora Core 5, and only command line available for this PC. I try to use the ALSA sample program to playback a simple sine wave, and I can't get any sound from the audio out. I suspect that the sound card is set as mute. My question is how to unmute the sound card, which is integrated with the VIA82xx mother board.The following is some of the info about the PC and sound card.
Code:
[root@mu153097 cards]# lsmod | grep snd
snd_via82xx 20316 0
[code]...
View 2 Replies
View Related
Dec 7, 2010
recently installed fedora 14 on my lenovo ideapad y530.
Linux bardot 2.6.35.9-64.fc14.x86_64 #1 SMP Fri Dec 3 12:19:41 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
here is my audio device:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
it has surround speakers and even a subwoofer. unfortunately only the two side speakers work. how to make ALL my speaker system work?
View 1 Replies
View Related
Nov 20, 2009
I basically can't get my mic to work in F12. After several releases fighting with pulseaudio, F11 finally worked almost OBO, after going to system->preferences->advanced sound configuration and setting all the input volumes to the maximum. But now there's no advanced sound configuration tool, and I just can't find anything to make it work. Skype isn't working, nor is gnome-sound-recorder. I do record some static, but nothing more. By the way, I'm on an Acer Timeline 3810T.
View 14 Replies
View Related
Jul 11, 2010
I recently installed realtek sound driver software in my system,
but after installing it,the speakers are not working....
I'm using fedora 13(x86_64).
i just want to make my system speak,like before....
how to make my speakers work ?
View 3 Replies
View Related
Jul 17, 2009
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
Jan 30, 2011
The sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.
View 2 Replies
View Related
Mar 18, 2010
my computer after being updated a few months back lost its ability to make noise. the sound and volume settings see no input (i have an internal mic) or out put (speakers) hardware. they see no sound hardware at all. im running this on a sager so im assuming its an intel HDA audio thing. is there a package where i could report this bug?
running ubuntu 9.10 64 bit
View 3 Replies
View Related
Apr 17, 2010
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
View 6 Replies
View Related
Dec 26, 2009
I recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies
View Related
May 7, 2010
I installed Fedora 12 64 bit on my HP dx2255 Desktop. The audio was working fine until I ran "Sound Preferences" application to test Microphone, the audio stopped working and the "Output" tab in "Sound Preferences" application showed "Dummy Output". After restarting the Computer audio started working. All of a sudden it stopped working when I tried to run "Sound Preferences" application to test the Microphone. This happens the same way all the time. I am able to get my audio back without restarting the Computer by running the command "pulseaudio --kill", but still the issue persists. I mean when I try to run "Sound Preferences" application to test Microphone, audio stops working and I have to run the "pulseaudio --kill" command or restart my Computer to get the audio back.
View 1 Replies
View Related
Jun 28, 2010
I have a newly installed Ubuntu 10.04 Operating system. As soon as i booted it up, i realized that my sound was not working, for anything (movies, ..... videos, music, etc.) How do Make the sound work?
View 8 Replies
View Related
Nov 14, 2010
I have both Windows 7 and Ubuntu installed on my laptop. Since the last few days my sound in Ubuntu is not at all functioning when it works just alright on windows.
View 3 Replies
View Related
Feb 25, 2011
I installed last night Ubuntu 10.04 LTS (I had XP) and now sound is not working!
WHAT TO DO?
My sound card: VIA Audio HD
In volume manager is sound and I can make volume 1-100 but not working on ..... or any song or anything.
View 9 Replies
View Related
Aug 19, 2010
I was reluctant to start yet another sound thread, but after days of searching sites and reading mini HOWTO's I'm still mute. I have tried configuring ALSA via:
# alsaconf
# /etc/rc.d/rc.alsa start
# alsamixer - all relevant sliders unmuted...
# alsactl store
...and still nothing. KDE reports that 'Audio playback device ALC889 does not work.' My kmix app doesn't even start. At boot I get this message 3 times:
"ALL CONFIG FILES NEED /etc/modprobe.d/sound - it will be ignored in a future release"
Even starting xmms brings up 'Check that - your soundcard is configured properly/the correct plugin is selected/no other program is blocking the soundcard'. btw, Windows reports I have an ALC888, not a 889. KDE lists it as present as both digital and analog, and the legacy system (whatever it is) as well as esound, but none work. I certainly had no difficulty with S11.
View 19 Replies
View Related
Jul 9, 2010
So I have this cable going from a cassette players "phones" jack to my computers input jack but there is no sound coming from my speakers though it did with Windows XP.
View 2 Replies
View Related
