Debian :: Input Sound Not Working?
Jul 9, 2010So I have this cable going from a cassette players "phones" jack to my computers input jack but there is no sound coming from my speakers though it did with Windows XP.
View 2 RepliesSo I have this cable going from a cassette players "phones" jack to my computers input jack but there is no sound coming from my speakers though it did with Windows XP.
View 2 RepliesI have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies View RelatedI've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
I want to compare the quality of a sound file (voice) before and after its transmission via a softphone (sjphone in my case). For this, i need to redirect the sound played, to the sound input (microphone or line-in).
View 1 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I installed debian lenny on a compaq computer with 383Mb Ram, a P3 processor, on a 996Mb Partition. Then I ran Code: #apt-get install xserver-xorg-core xorg alsa-base alsa-utils hal udev xfce4 xfce4-goodies xfce4-mixer xfce4-mixer-alsa thunar-archive-plugin sudo slim Everything installed OK so I ran Code: $sudo alsaconf Everything worked OK until the end, then I get the error,
Code: Loading driver...
Setting default volumes...
amixer: Muxer attach default error: No such file or directory
Now ALSA is ready to use. For adjustment of volumes, use your favorite mixer.
Have a lot of fun! and when I run Code: $aplay /usr/share/sounds/Front_Center.wav I get Code: ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[Code]....
After the latest update in testing, I found sound not to be working. I checked system config in KDE and found the wrong sound card set there. I changed it to the correct sound card, sound now works in some programs and not others (IE, Dragon Player and Amarok have sound, Kaffeine and Iceweasel do not).Sound does not work through the on board sound card.System beep sounds (through the onboard speaker) also fail to work.I've had similar problems in the past due to the inability to turn off the onboard sound, alsaconf has always fixed them, however debian has removed alsaconf from alsa-utils.
View 5 Replies View RelatedMy sound stopped working today,
My sound info is all located here: [URL]
Okay so I've been trying to get my Powermac G5 running Debian. I thought it would be an interesting project and see what I can do with the PowerPC hardware. The problem, of course, is the sound. Since this a G5 it's one of the newer machines so I looked up the drivers for the sound card which is labeled "K2 KeyLargo Mac/IO" and found that I needed a combination of snd_aoa, snd_aoa_i2sbus, snd_aoa_soundbus_i2c, snd_aoa_fabric_layout, snd_aoa_soundbus, snd_aoa_codec_tas, snd_aoa_codec_onyx, and snd_aoa_tonnie (also many of the resources had both - and _ for these names mix matched and I would love to know if that makes a difference or not and what the proper names for these are because I've tried them both with the - and _ to make sure but, I think I'm missing something. I'm not good with sound).
View 0 Replies View RelatedI am having some trouble with my sound card, for what I understanded is not detected on my kernel, my kernel is the following: 2.6.26-2-686. I got a Debian Lenny Stable with Xfce4, my sound card comes incorporate with my motherboard that is an Asus P4S800D-X and my sound card is a SoundMaX.
I am sure that the kernel doesn't recognize it because when I put on a terminal: lspci | grep Audio, I don't get nothing. Also when I go on my Xfce task menu to Settings >> Mixer Settings, I just get a default mixer setting with no audio channels or nothing. I got all my alsa drivers intalled too.because I tried to go to www.asus.com homepage (Motherboard Manufacture) and I cannot find the driver of the sound card for linux.Where I can get this driver? Or can I update my kernel with Lenny stable version? if so, let me know what version and what repository to get it. Because before I had a Debian Squeeze testing with the Kernel 2.6.30 and worked fine.
apt-get suggetsed I should remove some packages I was no longer using. I've read the threads that explain this, but unfortunately I did that just now, not when I actually ran the damn command. I must say, however, that there were lots of things I wasn't actually using, so it was useful in a way. But there is a problem:
I have a Dell Inspiron 1525 and to get my sound keys working (the mute, volume up and volume down keys) I had to go to Settings-->Regional & Accessibility-->Keyboard Layout and there in Keyboard model I chose the option Dell Laptop/Notebook Inspiron 6xxx/8xxx. I know that's not exactly my model, but that made my sound keys work fine. Well, since I did the autoremove thing, that stopped working. I haven't got a clue what library was being used to get the sound keys working.
I've just upgraded my kernel to 2.6.32 and I cant use sound anymore!!! My card was detected ,here is the output of lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
also frimware is installed ,gstreamer as well the sound is not on mute and it was working on the previous kernel .
I did some mess with adobe flash player and now I have no soound on my Thinkpad T60.
root@debian:/etc/modprobe.d# dpkg -l|grep alsa
ii alsa-base 1.0.25+3~deb7u1 all ALSA driver configuration files
ii alsa-utils 1.0.25-4 i386 Utilities for configuring and using ALSA
ii bluez-alsa:i386 4.99-2 i386 Bluetooth ALSA support
ii libsox-fmt-alsa 14.4.0-3 i386 SoX alsa format I/O library
ii libwine-alsa:i386 1.4.1-4 i386 Windows API implementation - ALSA sound module
[CODE]..
I installed a new source for multimediaI made the necessary updatessome paquets were created other were deleted.And now I don't have any sound, when it was working before I added the new repository
View 2 Replies View RelatedI have just installed Squeeze on my 5+ year old iBook G4 and it runs quite nicely and quite fast! I am very happy with it overall. Finally I have been able toinstall Debian on a piece of hardware. Dual boot is generally hopeless on Macs. So this is a single boot setup and I am quite happy with it. I have two major issues right now:1. There's something wrong with the sound system. I get the following error message when I clickon the small x to the right of Volume Control (on the upper right corner of my screen). See attached screen shot.
View 3 Replies View Relatedi installed debian squeeze on a dell dimenson 3000 and the sound isn't working here is the specifications of the [URL] the Alsa preferences brings up the device as an Intel ICH5
and the documentation for the machine comes out as AC97, Sound Blaster Emulation, ADI 1980 audio controller with 2.1 implementation
what kind of driver, firmware, modules needs to be installed in order for the sound to work properly
I have a problem with VLC media player. I just reinstall it and when I try to run any movie the sound is working well but there is no video. I already tried every video codecs in the settings but with the same result. I also tried to start first VLC and select the video but that does not change anything.
View 5 Replies View RelatedEverything was fine last night, but this morning I signed into my Squeeze box and found that website play audio fine, Hulu Desktop works, some games work, etc. but Rhythmbox, VLC, Totem, and others don't . It all started with an attempt to diagnose a lack of sound in TVtime.
View 1 Replies View RelatedI am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
View 1 Replies View RelatedLenovo Thinkpad X201
Conexant 20585
Code: Select allfishybawb@minigonzo:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CX20585 Analog [CX20585 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I've been having problems with audio not working through the speakers since I upgraded to Jessie. I did a fresh install, the same hardware worked out of the box on Wheezy. Audio does work through the headphones - searching Google results in a LOT of similar issues on various distros, but none of the suggestions I've found have worked. Pulseaudio is not installed.
Alsamixer shows that the speakers are un-muted, and toggling the headphone auto-mute in case that was causing problems doesn't work. lsmod shows that snd_hda_codec_hdmi is loaded and in use - could it be trying to send sound via HDMI? Odd, because this laptop does not have an HDMI port. Blacklisting that module doesn't seem to make a difference however.
my cousin recently brought me an old dell to see if I could get it working.he mainly wants to use this machine to record himself playing guitar.I immediately tried installing ubuntu, but found it to be unbearably slow.the computer is on the verge of being an antique at 1ghz and 256mb of ram.so I started looking for alternatives, and decided to give debian a shot since I'm familiar with ubuntu and know that it is based on debian.I installed Debian Lenny from the netinst ISO and find it to be much quicker booting and loading programs than ubuntu.I will most likely put debian on my desktop when I'm finished getting this poor old dell set up.
I'm unable to get sound output working properly.I have checked that the volume is not muted. while using pidgin, after sending a message the "message sent" sound starts "skipping" like a scratched cd and the only way to get it to stop is to close the progam completely. I am unable to hear sound or watch videos with totem (and most likely other players, but I have not tested any yet).the files load audio files show their tag information and the length of the track and videos load the first frame but the file never actually plays. when I try to record with Sound Recorder, the application locks up.when I try to record with Audacity the software doesn't stop responding, but also doesn't record.I tried un-muting the microphone (monitor) to check that the microphone I have still works, and can hear it over the speakers, so this leads me to believe that my hardware is in good working order, but that I have something configured improperly.
My sound on Runescape stops and picks up, is very choppy and annoying. I'm using Debian "Lenny". Sound on everything else works just fine (Flash, VLC, etc...)
Here are the Java packages I have installed:
Here is my computers hardware:
Intel Core 2 Duo 1.8Ghz
2GB RAM
250GB HDD
nVidia 8600GT
So I want to be able to listen to sound coming in on the line in port. The sound does work as I have tested with Gnome sound recorder. However, I would like to be able to hear it all the time. I don't want to have to record to be able to hear it. Is there a way to mix the line input sound with the normal system sounds? This is so I can run sound from my Xbox 360 into my computer. I currently use a audio splitter but I get problems with volume levels due to voltage changes going to the speakers.
View 3 Replies View RelatedI have the following problem. As trying to record with an analog microphone through arecord, audacity, gnome-sound-recorder i can get no sound captured. Then i've tried skype where the volume is too low and the sound is distorted.
Until i was using an usb webcam with mic integrated i had no problem using skype but with a simple usb mic i can't get sound recorded. I've tested 3 different mic in a windows os and in opensuse 11.3 on the same pc with a double partition. All of them are working fine with win but not with opensuse.
Bellow i' m providing some info as requested in a similar post from oldcpu
11.3 x86-64 & vt1828s - No sound from mic or line in code...
i've tried to upload to the alsa site but it gave me only a .txt output therefore, i've put it on pastebin.
Sound output works without problems. The only problem is the mic input.
When the volume of the mic is at 100% i can here sound from the speakers, what should mean that the mic is working, but it's not capturing anything. I've checked the mixers from yast>harware>sound and seem to be all up as in alsamixer in terminal and kmix.
I'd like to add that i'm using opensuse 11.3 with kde 4.5.5 updated today through the stable repositories and to have even updated alsa, as proposed always from oldcpu in the same post mentioned in the beginning of this post, from the following site and for my specific kernel.
I've never tried getting my mic to work in linux up until now. For some reason I can't get any sound to come through on the input. I don't really mess with my sound settings so my knowledge is pretty limited in this area. I have a Creative Audigy 2 card and it seems to be using PulseAudio. alsamixer, aplay etc. all seem to NOT be installed. I can edit volume one of two ways. The gnome sound prefrecnes or using pacmd. I'm kind of at a loss here and my searches haven't turned up anything useful as they refer to alsamixer etc.
View 2 Replies View RelatedI had have this problem since I first install Karmic back in February. Now I installed 10.04 and the problem with the input sound is still here.
Plain simple: there is no input sound at all.
I already checked the alsamixer controls at the terminal and everything seems normal. I have a sonny Vaio laptop model VPCF11FD.
I'm using a Dell Vostro 1700 with Ubuntu Lucid Lynx and nothing I do with the sound preferences changes anything. I've also tried running alsamixer. no luck.
View 4 Replies View RelatedI recently updated my Debian jessie system (for the first time in a few months). It broke my video driver (fortunately a dpkg-reconfigure fixed that) and my wireless driver (forget how I fixed that...), and my sound. ALSA still thinks I have an output device, I've set volumes all the way up in alsamixer.
In vlc and firefox, I can't hear anything using the default audio out (which I think is pulseaudio), nor can I hear anything if I ask them to use ALSA output directly. I've tried rebooting, killing/manually starting pulseaudio, etc to no avail.
I think it was either the kernel upgrade (went from 3.10 to 3.13) or a configuration option in some sound subsystem that broke. To be clear, sound was working perfectly before the upgrade. My machine is an Ivy Bridge-era Zenbook.
I am trying to get my Behringer UCA202 USB sound card working on Debian Squeeze. Under lenny I can get the card working perfectly using modprobe snd-usb-audio then alsaconf. On squeeze however, I did the same thing and followed the debian wiki instructions, but while I can view the card to pull up in alsamixer no sound will play and under "item" both dB gains are stuck on 0.0 despite the channels being unmuted and the volume being up.
[Code]...
[EDIT]: I solved this problem by changing the line in /etc/modprobe.d/alsa-base.conf "options snd-usb-audio index=-2" to index=1. I am not sure why that made it work though since I thought that line only changed the priority of using the card.