Fedora core 13 1) Input focus move upward by one line itself and continues moveing upward with some delay. 2) It also happen with mouse selction focus move upward and put focus on above icon after some delay. what this error.
View 4 Replies
How can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies View RelatedI have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies View RelatedI have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
lspci information:
i use fedora9 and windows xp on my system when i reboot my system it comes a screen to select OS but i have just 2 seconds to select how can i change this time and also default OS
View 3 Replies View RelatedFedora 13...using yumex I installed everything for eclipse/CDT C/C++.
However when creating a new project, no option fpr C++ is shown.
Obviously Eclipse doesn't know CDT exists!
I want to eventually add Qt 4.6.2
Here is what I have:
Have downloaded Fedora 14 (64-bit Gnome) and installed KDE so I'd have the option of both desktops.
However, I'm unable to change from one desktop to another - from what I've read, there's meant to be a drop-down menu at the login page allowing you to select the desktop but I don't have one.
I am a beginner with Fedora (mostly used Ubuntu in the past few years, but figure it's time for a change) so I may be missing something obvious.
Not sure it's relevant in this case but specs: Intel Core 2 Duo, ATI 4850, 4gb ram, 320gb HD.
After upgrading two different machines from F11 to F12, one x64, one 32, I found that when I create an email and hit "To:" I see two entries for every entry in my contacts; anyone else see this problem?On the 32 bit, on a new account, I did an import contacts from a csv file, I see doubles and I do not see all my contacts.
View 1 Replies View RelatedI'm trying to install Redhat 6.1 on my new pc (Acer) but I can't end my installation process because of a type drive selection. More exactly I have changed the boot sequence and set it to boot from a cd-rom drive in Bios environment. I have observed that to solve my first problem
" PCI-IDE: unknow IDE controller on PCI bus 00 device fa, vid=8086, did=2928 have changed in Bios environment: "D2D recovery:" from IDE ---> to AHCI Then I have observed that I have passed this step but I am stuck with this problem: Which drive should I try?[*] Specify module parameters I have tried all devices shown in the list but without success.
I'm a Fedora user, and recently I switched from KDE to Gnome. Since then I'm experiencing a nerve-wracking problem when I use the right-click. Almost every time when I right-click the result is the automatic selection of the option in the context menu which is at the same level as the cursor. This happens more than 50% of the cases. Is that normal in Gnome or am I the only one that experiences this kind of problem?
View 6 Replies View RelatedI'm moving from Ubuntu to Fedora 13 and note,to my delight, that ICEWM is an option. I much prefer that, or Joe's WM to the biggies like Gnome or KDE.the problem is how do I select ICEWM? I feel sorta stupid here. I see nothing on the menus or the control panel which applies and the splash screen is devoid of a selection. That leaves the command line. Have I missed something?Is there no GUI to do this with? How do I change to ICEWM?
View 5 Replies View RelatedI like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies View RelatedI'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
I am currently running Fedora 14 on a 32-bit AMD XP motherboard. My plan is to replace the motherboard w/an AMD 64-bit (multicore, prob'ly) version (most likely w/a different h/w architecture) and I'd like to make sure my current applications and configuration (if that makes any sense) are moved en masse to the 64-bit version.
Is there an easy way to do this? What are my "gotchas"?
I'm running Fedora 14 as a KVM guest on a CentOS host. I decided to give preupgrade-cli a shot to get Fedora 15.
After reboot, I got a not enough free space error, so I decided to add another virtual drive and move /usr to it.
The partition on the new drive is ext4 formatted (just like my / partition)
Code:
Then I mounted the new partition on /newusr, and copied the files using cp and rsync
Code:
Code:
I also tried rsync without the HAX options, same results.
I then changed my /etc/fstab to reflect the new /usr
Code:
Then I reboot and watch the booting process, it fails first at loading NetworkManager, then elsewhere, and system stops. Of course I could revert back using a live CD and try all the other options, but nothing works for me.
There is an error in /var/log/boot.log, but I don't think it is related, as it shows when booting normally as well.
Code:
I have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies View Relatedi have an fedora system, with no separate /boot partition. there is only one big / partition. I think this is the reason that preupgrade does not work. So I decided to build an own /boot partition. Could anyone give me a hint how I could do this easily? My idea is:
get a second hard disc and format this with 2 partitions (/boot and /)dd the partition1 to the new one.
is this a nice idea? my only problem is that my second hard disc is smaller then the current one. but the current one is not filled up total. but I can not dd to a smaller partition or? is it possible to boot with an live-cd an copy the partition with the cp command?
I am using a touch command to setup a specific range of names, identifiers, etc. Now I am trying to move the files from a certain range to another directory I created. Sorry to post just can't remember how to do this but I know it is fairly simple for you guys. I have the output set as fred*_[!g].* and I am trying to get these files to my created directory.
View 2 Replies View RelatedI'm a recent convert from Ubuntu (my company uses Juniper VPN and FedoraRHEL is the only certified OS for the client) and I'm having an issue that I can't seem to find the answer to.I installed Fedora 14 and have dual monitors running on a GeForce 8500 GT with one DVI and one VGA connection. VGA is the left monitor, DVI is on the right. After install, Fedora was defaulting to the DVI (right) monitor as the primary, so I used the Monitors utility to rearrange them so they went left to right. I even selected the left (VGA) monitor as the primary. I was hoping that the top and bottom bars would follow.My issue is that both the launch bar on the top, and the task bar on the bottom are still on the right-hand screen, and I can't for the life of me figure out how in the heck to get them both over to the left-hand screen. Am I missing something horribly obvious?
View 1 Replies View RelatedCurrently, my disk layout is as follows:
Code:
/boot /dev/sda1
/ /dev/sda5
windows /dev/sda3
/home /dev/sda4
/dev/sda2 is currently an extended partition.
I purchased a small SSD, and I'd like to move most of the root partition and my home directory over to it. Assuming the new drive is /dev/sdb, my desired layout is this:
Code:
/boot /dev/sda1
windows /dev/sda3
/data /dev/sda4
[code].....
What's the best way to go about this with minimal downtime? Second, what configuration files would I need to update?
I had need of putting a file in one of the directories of the $PATH.The echo $PATH is/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Majara/binI did in the terminal:mv file /home/Majara/binI have learned now that /home/Majara/bin isot a directory, but the file is not anywhere
View 2 Replies View RelatedI feel like this is probably a dumb question but regardless, I don't know the answer and my eyes will start bleeding if I keep trying anymore. How do you move files between folders? Dolphin's layout (unless I'm not figuring it out, which is probably the case) doesn't seem to let you drag from one folder to another and there's no other pane to see another folder to drag to.I have an mp3 file in my download folder that I want to move to my music folder but I can't get it to move.
View 1 Replies View RelatedF15 Gnome edition. I am trying to move files, no big deal, except they keep moving themselves back again about 4-5 seconds later. This happens in nautilus, gnome-commander, or even at the command line. See the following output. The volume is NTFS, but I have ntfs-3g installed, and i've never had this problem before with NTFS volumes.
Code:
[root@kermitfed store]# ls
animalstore Cymande Groundation Mutiny
[code]...
I have Fedora installed and I am trying to change to CentOS. Can't boot from live CD I download
View 2 Replies View RelatedF-10 default installation is /swat /boot and the rest /
Many on this site recommend setting up separate partitions for /home
Does making a separate logical volume and putting /home in it do the same in allowing one to do an install to the original logical volume without affecting /home?
If it does, how does one get the 2nd LV recognized in the file system?
I am currently running Fedora 11 in a box with ATI x1650 graphic card, but I am planning the installed hard drive to another box with nDivia GeForce 6150 card. Do you think Fedora will detect the new card and install its driver? I don't mind getting a driver and installing myself as long as I can log on to Fedodra with a generic graphic driver. What difficulty do you think I will run into initially?
View 3 Replies View RelatedI'm hoping this is the right sub-forum, if not please move this post. My question is, how would I go about moving an LVM based virtual machine to a different host? Can I just use dd to copy the entire logical volume to a file, move the file to the other host, then again use dd to copy the file onto a newly created logical volume? I'm using KVM by the way.
View 2 Replies View RelatedWhen I don't move my mouse, my screen pauses and stops doing anything. I constantly have to move my mouse to refresh what is on the screen. For example, if there is a video on the screen, the video will stop and glitch up if I am not touching the trackpad to make the cursor move around the screen. The second I start to move the cursor on the screen, however, the video plays again. Why?!
View 1 Replies View RelatedI have the strange problem that my sound and video stops sometimes when I'm not moving the mouse. As long as I keep moving the mouse there is no problem.
I am using
- Fedora 14
- 2 Sound cards (Internal Audio and Audio device on my Radeon HD 3600 video card, however this sound is not working)
