I am currently running Fedora 14 on a 32-bit AMD XP motherboard. My plan is to replace the motherboard w/an AMD 64-bit (multicore, prob'ly) version (most likely w/a different h/w architecture) and I'd like to make sure my current applications and configuration (if that makes any sense) are moved en masse to the 64-bit version.
Is there an easy way to do this? What are my "gotchas"?
I have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies View RelatedI recently purchased a motherboard but overlooked that there are no ide or fd plugs on it. What I am wondering is, since the solder points are on the motherboard, can I solder some plugs on or is the controller disabled/non existent?
View 5 Replies View RelatedI've recently changed the motherboard of a redhat server that's been running fine otherwise. The new motherboard is different to the old one. I can't boot in now; getting "Kernal panic: VFS : Unable to mount root fs on 00:00" messages. I've run mkinitrd to rebuild the image file and have changed the grub.conf line to point to the new image file but it still occurs.
title Red Hat Linux (2.4.25)
root (hd0,0)
kernal /vmlinuz-2.4.18-14 ro root=LABEL=/
initrd /initrd.img.2.4.18-14
However; during the bootup I spy some "unknown IDE device" errors along with some "IRQ resource cannot be reserved" and/or "Could not enable IDE device" or similar messages. As per attached image.
I can detect the harddisk when I bootup using rescuecd and that's how i rebuilt the image file. I have tried changing the "ro root=" to "ro root=/dev/hda3" or other hdax figures; but still the same.
i want to install fedora core 2 on my lap dell inspiron 15 it shows there is no hdd i convert the bios option to ahci but the sata hdd not found
View 2 Replies View RelatedI like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies View RelatedI got an Asus M3A78-T motherboard last year, along with a Phenom 9650 CPU and 2GB of RAM. I originally tried to install Sabayon, but it would occasionally hang while running. I decided to give Fedora another try (wasn't happy with FC4 a few years back) at the constant chiding of my friend.
My first try was with the x86_64 Fedora 10 ISO, using an IDE hard drive and CDROM. It would hang a little bit into something like 'copying system files, at the same place every time. Thinking it was a bad burn, bad iso, or something (checksum and image verification passed) I went ahead and got the DVD ISO. The DVD would always hang a little bit into "Formatting file system." At this point, I have tried EVERY other combination of hardware - swapped out ram, CPU, PS, bought SATA hard drive and DVDROm drive, unplugged the mouse, and even the case pigtails for USB and Firewire. It always hangs in the same place. Somewhere along the process, I took the motherboard back and exchanged it for a new one. Still fails, and in exactly the same place.
The system hang is a hard lockup. Mouse freezes, no keyboard activity (even LED status changes.) The drive activity LED will go out and the progress bar stops advancing.
I'm surprised I'm not seeing anyone else with this problem - I thought this board was a bit more prevalent, but I'm guessing not! What's my next step? I would create a bug report, but I don't know what subsystem is causing the hang. I suspect SATA drivers, but I'm not sure how to test that.
And one other clue - I get a scrambled video screen before it comes up to the first X install screen:
It only lasts for 5 seconds or so, then comes up okay.
I am trying to recover some data on some drives that are in the same LVM. When I upgraded the motherboard, I had complications getting the drives to all load under the LVM, and in the process I made the mistake of formatting one of the drives. The problem now is that the UUID changed on the drive so when I try to mount the LVM it can't find device with a certain UUID. When I try to set the UUID back to the old one it says 'Invalid UUID format'.
I can set it to a UUID generated through 'uuidgen', si I then noticed that the format of that UUID is different than the old one which I'm trying to set it to. Why is that? Is there a way I can get it to change to the old one in the different format?
The old format: yQtrVB-5jCk-vF10-05c2-AcDL-GNn1-ivdxxh
The new format: d5224587-a6cd-4a66-a12b-d7b75eec5871
Recently changed my motherboard. The new board has the 790FX/SB750 chipset, and the old board used the 770/SB600 chipset. Prior to the change, I had never had any problems reading/writing CDs or DVDs. I now find that reading a data CD is very slow, it can take up to 30 secs before the icon appears on the desktop and a filer window appears. In my tests thus far, only data CDs written on Linux can always be read, albeit slowly. Data CDs written on Windows are variable. Some are never seen by the system, others may or may not be opened. That is I might be able to read it during one test, and next time I try I can't.
When a CD is not 'seen', there is an initial flurry of activity by the drive, but the drive icon (in "Computer' window) doesn't think a disc is in the drive. I can boot OK off a DVD, and data DVDs wrtten on Linux are opened and read quite fast. I am running Fedora 12 x86_64 with the latest Fedora kernel package (2.6.32.9-70), and the Motherboard bios is the latest available. The CD/DVD drive is a SATA Pioneer DVR-215. I have checked the bios settings, and have tried setting 'storage configuration' to IDE and to AHCI, each giving the same result.
I tried switching the SATA data cable from SATA-3 to SATA-2 and was able to open and read a Windows data CD that had previously not been seen, but subsequent attempts have failed to open and read that CD. I suspect the problem may have something to do with hardware drivers, but I really am guessing about this and have not been able to find any useful information on this.
no sound with motherboard Asus M4A78T-E for fedora 13
View 7 Replies View RelatedI have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
System:
Fedora 12
Motherboard: ASUS A8V-XE (Socket 939)
CPU: AMD Athlon 64 3500+
Memory: DDR 400 184 pin (PSD1G400KM)--two sticks, 1 GB each
Much to my consternation, my video card blew a few capacitors. A local computer shop said that they tried a working PCI Express card, and the video was still not working, so they concluded the PCI Express slot was damaged as well. However, they also tried an older model video card that uses the PCI slots, and everything worked. So I ordered a new video PCI video card. It's on its way (Amazon). However, in the meantime I had a 1997-vintage video card sitting around, so when I got the computer back, I tried it. No signal to the monitor, not even motherboard booting beeps. Nothing. I called the shop back. He said even though my old card fit the PCI slot, new changes might have made it incompatible (16 vs. 32 bit, etc.). Anyway, even when I take the card out and boot, no beeps. That makes me wonder whether the old card did something, and now the motherboard is damaged beyond use. The man at the shop said the possible incompatibility of the old card should not have damaged the motherboard. Instead, he suggested that once a part of the motherboard is damaged (and we know the PCI Express slot is damaged), the motherboard as a whole can start acting erratically. However, it was beeping at the shop; now it is not.
I'm hoping those on this forum more knowledgeable about hardware than I am can give me some advice on the following questions.
(1) Does everything the shop did and said sound reasonable and likely?
(2) When my new PCI video card arrives from Amazon, if the computer still will not boot or even beep, does this prove I need a new motherboard?
(3) Is there any chance the motherboard could damage the new video card?
(4) Biggest issue: If I need a new motherboard, should I try to find one that accepts the same CPU and memory sticks? So far, I haven't been able to find one online. Or should I bite the bullet and get a new CPU and memory to match the new motherboard?
(5) If I get a new motherboard, new CPU, and new memory, can you suggest some possibilities of what I should look for? I don't want low-end, but for the work I do, I don't need really high-end, state-of-the-art either. I don't play computer games.
I just went out and bought stuff to build a new computer, and among the parts was a Gigabyte ga-890fxa-ud5 motherboard ([URL]). The board has 3 (well, 4, but we'll stick to the 3) main sata interfaces, with 2 slots per interface, allowing 6 sata drives. In slot_0 i put my blu-ray drive, in slot_1 i put my drive that will host the OS and its partitions, and that is in the sata connector pair on the left. The middle sata connector pair (slot_2 and slot_3) i have 2 2tb drives, and in the sata connector pair on the right (slot_4 and slot_5) i have 2 1.5tb drives.
[Code]....
I'm running Fedora 14 as a KVM guest on a CentOS host. I decided to give preupgrade-cli a shot to get Fedora 15.
After reboot, I got a not enough free space error, so I decided to add another virtual drive and move /usr to it.
The partition on the new drive is ext4 formatted (just like my / partition)
Code:
Then I mounted the new partition on /newusr, and copied the files using cp and rsync
Code:
Code:
I also tried rsync without the HAX options, same results.
I then changed my /etc/fstab to reflect the new /usr
Code:
Then I reboot and watch the booting process, it fails first at loading NetworkManager, then elsewhere, and system stops. Of course I could revert back using a live CD and try all the other options, but nothing works for me.
There is an error in /var/log/boot.log, but I don't think it is related, as it shows when booting normally as well.
Code:
I have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies View Relatedi have an fedora system, with no separate /boot partition. there is only one big / partition. I think this is the reason that preupgrade does not work. So I decided to build an own /boot partition. Could anyone give me a hint how I could do this easily? My idea is:
get a second hard disc and format this with 2 partitions (/boot and /)dd the partition1 to the new one.
is this a nice idea? my only problem is that my second hard disc is smaller then the current one. but the current one is not filled up total. but I can not dd to a smaller partition or? is it possible to boot with an live-cd an copy the partition with the cp command?
I am using a touch command to setup a specific range of names, identifiers, etc. Now I am trying to move the files from a certain range to another directory I created. Sorry to post just can't remember how to do this but I know it is fairly simple for you guys. I have the output set as fred*_[!g].* and I am trying to get these files to my created directory.
View 2 Replies View RelatedFedora core 13 1) Input focus move upward by one line itself and continues moveing upward with some delay. 2) It also happen with mouse selction focus move upward and put focus on above icon after some delay. what this error.
View 4 Replies View RelatedI'm a recent convert from Ubuntu (my company uses Juniper VPN and FedoraRHEL is the only certified OS for the client) and I'm having an issue that I can't seem to find the answer to.I installed Fedora 14 and have dual monitors running on a GeForce 8500 GT with one DVI and one VGA connection. VGA is the left monitor, DVI is on the right. After install, Fedora was defaulting to the DVI (right) monitor as the primary, so I used the Monitors utility to rearrange them so they went left to right. I even selected the left (VGA) monitor as the primary. I was hoping that the top and bottom bars would follow.My issue is that both the launch bar on the top, and the task bar on the bottom are still on the right-hand screen, and I can't for the life of me figure out how in the heck to get them both over to the left-hand screen. Am I missing something horribly obvious?
View 1 Replies View RelatedCurrently, my disk layout is as follows:
Code:
/boot /dev/sda1
/ /dev/sda5
windows /dev/sda3
/home /dev/sda4
/dev/sda2 is currently an extended partition.
I purchased a small SSD, and I'd like to move most of the root partition and my home directory over to it. Assuming the new drive is /dev/sdb, my desired layout is this:
Code:
/boot /dev/sda1
windows /dev/sda3
/data /dev/sda4
[code].....
What's the best way to go about this with minimal downtime? Second, what configuration files would I need to update?
I had need of putting a file in one of the directories of the $PATH.The echo $PATH is/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Majara/binI did in the terminal:mv file /home/Majara/binI have learned now that /home/Majara/bin isot a directory, but the file is not anywhere
View 2 Replies View RelatedI feel like this is probably a dumb question but regardless, I don't know the answer and my eyes will start bleeding if I keep trying anymore. How do you move files between folders? Dolphin's layout (unless I'm not figuring it out, which is probably the case) doesn't seem to let you drag from one folder to another and there's no other pane to see another folder to drag to.I have an mp3 file in my download folder that I want to move to my music folder but I can't get it to move.
View 1 Replies View RelatedF15 Gnome edition. I am trying to move files, no big deal, except they keep moving themselves back again about 4-5 seconds later. This happens in nautilus, gnome-commander, or even at the command line. See the following output. The volume is NTFS, but I have ntfs-3g installed, and i've never had this problem before with NTFS volumes.
Code:
[root@kermitfed store]# ls
animalstore Cymande Groundation Mutiny
[code]...
I have Fedora installed and I am trying to change to CentOS. Can't boot from live CD I download
View 2 Replies View RelatedF-10 default installation is /swat /boot and the rest /
Many on this site recommend setting up separate partitions for /home
Does making a separate logical volume and putting /home in it do the same in allowing one to do an install to the original logical volume without affecting /home?
If it does, how does one get the 2nd LV recognized in the file system?
I am currently running Fedora 11 in a box with ATI x1650 graphic card, but I am planning the installed hard drive to another box with nDivia GeForce 6150 card. Do you think Fedora will detect the new card and install its driver? I don't mind getting a driver and installing myself as long as I can log on to Fedodra with a generic graphic driver. What difficulty do you think I will run into initially?
View 3 Replies View RelatedI'm hoping this is the right sub-forum, if not please move this post. My question is, how would I go about moving an LVM based virtual machine to a different host? Can I just use dd to copy the entire logical volume to a file, move the file to the other host, then again use dd to copy the file onto a newly created logical volume? I'm using KVM by the way.
View 2 Replies View RelatedWhen I don't move my mouse, my screen pauses and stops doing anything. I constantly have to move my mouse to refresh what is on the screen. For example, if there is a video on the screen, the video will stop and glitch up if I am not touching the trackpad to make the cursor move around the screen. The second I start to move the cursor on the screen, however, the video plays again. Why?!
View 1 Replies View RelatedI have the strange problem that my sound and video stops sometimes when I'm not moving the mouse. As long as I keep moving the mouse there is no problem.
I am using
- Fedora 14
- 2 Sound cards (Internal Audio and Audio device on my Radeon HD 3600 video card, however this sound is not working)
I have been running F14 as a 32-bit system (original m/b was 32-bit). Now the system is on a 64-bit dual-core processor board and I'd like to change from the 32-bit kernel to 64-bit. I downloaded a 64-bit kernel (kernel-2.6.35.6-45.fc14.86_64.rpm) and attempted to install it. It won't install and Package Installer returns a message of the sort that says this file "has incompatible architecture.
Valid architectures are ['athlon', 'i686', 'i586', 'i486'....]". My processor is an Athlon 64 x2. Is it possible to do what I want to do (I only want the kernel at the moment)? Is there some Fedora file I need to modify to allow the system to install the 64-bit kernel for this m/b? Do I need another file (or files) installed before I install the kernel?