there was a new kernel update that I installed today. I used some kl mod packages to work my broadcom. For some reason its not working after the kernel. Is there a way I can recompile the driver or so?
View 7 RepliesIn the latest Fedora 11 updates, kernel 2.6.30.5-43.fc11.x86_64 breaks broadcom-wl functionality on my BCM4312 wifi adapter
Code:
$ lspci -v | awk '/Ether|Net/,/^$/'
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell Device 01f1
Flags: bus master, fast devsel, latency 64, IRQ 17
[code]....
and all is well, the modprobe commands can go in /etc/rc.local. BCM43xx *.inf driver for ndiswrapper (32 and 64 bit)here:
(kmod-wl-2.6.30.5-43.fc11.x86_64-5.10.91.9-4.fc11.2.x86_64 is installed)
My kernal version is 2.6.35.6-45.fc14.i686 (2.6.35). I have installed fedora 14. I dont have a wired network connection , so as mentioned in one the threads [URL]... i downloaded the RPM fusion of the driver and followed the steps. This is the first time m installing linux ,i have no idea if my kernel is kmod version. But when tried installing any of those codes provided it gave an err saying NOTHING TO DO. But my network manager doesn't show the wlan. It still says driver firmware missing. When checked the loaded kernel it did have ssb and b4. I did blacklist them. But reappears everytime i check and wl is not loaded.CAN anyone please help me know wat I should do?
View 5 Replies View RelatedYou know, I thought I had my Broadcom issues all figured out, I have a simple list of installing the RPM Fusion repos do a yum update and yum install kmod-wl and everything works.However, this time it didn't work. I am installing a new fedora 14 for a friend who is totally fed up with windows and I get this error: (Yes I have searched the internet and Fedora forums for an answer)
[code]...
I have tried the two yum suggestions and they don't work I have tried updating the kernel and have installed kernel-devel-'uname -r' (suggested by another site) I have tried installing broadcom-wl and b43-openfwwf which only knocked out the card entirely
I installed broadcom 4322AG to my HP mini 2140, I restart the netbook but the wireless is not working.
[Code]...
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I have an HP Pavilion notebook with a Broadcom WLANcard that had been working very nicely in Fedora Core 10 until this evening, when I took my notebook to a conference room where there was no internet access. (I tried to connect to wireless networks, but there were none in the area, as I discovered.) am now unable to connect to my local (home) wireless network as the device is now non-existent . Can someone please walk me through the steps to fix this or re-install it (I have tried reinstalling broadcom-wl, but that didn't help). My lspci listing is reproduced below:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
[code]...
I am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.
To answer the standard questions:
Code:
Code:
Code:
Code:
and finally
Code:
But no wlan device or anything else.
Broadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies View RelatedI upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
My update to kernel version 2.6.33.5-124 last night killed my Dell wireless, which uses broadcom-wl 5.60.48.36-1. What happened and how do I fix it?
View 14 Replies View RelatedI just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.
When I did lspci, the very last line states:
Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
I'm having a bit of trouble getting the wireless to work on a Dell Inspiron 9200. Following the instructions here didn't help, though I didn't get any errors along the way. Scanning for networks produced 'No scan results,' though. I'm using Ubuntu 10.04.1.
lscpi | grep 'Broadcom Corporation'
02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
[code]....
I have a broadcom 4322 and haven't successfully got it working yet. the hard drive failed in this laptop and i took it out. i am using a bootable flash drive with ubuntu on it installed. not the live edition. i am trying to find out if somehow since the hard drive is not in the laptop, if that could have anything to do with runnin off the usb flash drive it boots? i have a wired connection using the 8gb flash drive. since there are drivers for usb wifi devices which i know are different, is it possible that the wifi card is looking somewhere else instead of the usb port?
lsusb (i know i have a flash drive not a wifi usb card but this commands still shows this and ndiswrapper -l doesn't show nothing but blank next line to type on. i have tried alot of stuff
network DISABLED
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
[Code]...
I am running kde ubuntu 10 on a gateway laptop with a Broadcom bcm series wireless network card. network manager 7.0 is installed. the broadcom STA wireless driver is also installed. Network manager sees the network and I can select the network and it shows as active yet I have no connection. The wired connection works fine.
View 1 Replies View RelatedI have a problem here with my updated kernel. I'm currently using Fedora 14 kernel 2.6.35.9-64, and my wireless card Broadcom BCM4312, which had an issue before with Linux distros, is working fine already, thanks to the kmod-wl software driver. My problem now is this, after updating to kernel 2.6.35.10-72, fedora does not boot, and I noticed that the wireless card is the only thing not activating, compared to the working kernel. And when i looked at the log of the bootup (pressed right arrow key), I saw this:
[code]...
i just updated my Fedora 14 from Kernel version 2.6.35.11-83 to 2.6.35.11-88 Now the driver for the broadcom wireless ethernet adapter is not detected anymore I installed the driver using
[code]...
The package is still installed but when i but when i use modprobe again the output is "module wl not found" Anybody some ideas? By the way, here is the hardware specification
[code]...
I'm trying to help a friend with his Acer Aspire 5003 WLMi computer, and if you guys can't help me get this to work, I have to resort to reinstalling Windows XP on his computer.
I've tried with f34cutter and the Windows driver with ndiswrapper, and both ways should work (many others seems to have got it working), but I haven't.
I can't keep up with this much longer (he wants to have his laptop back someday), and I will post the relevant info as soon as you need it.
Recently I moved from Intrepid Ibex to Lucid Lynx and everything went fine during and post installation except wireless B4311. I tried to install the specific driver from System-> Administration-> Hardware Drivers but it comes out with an error logged in file jockey.log
View 2 Replies View RelatedI have installed Ubuntu 10.4 (with all recent updates) on my hp nx6125 with broadcom bcm 4318. I have tried installing fw-cutter from synaptic package manager but it didnt show up on hardware drivers. Do I have to do something else as well with it?
View 1 Replies View RelatedI am new to Linux, nevertheless Ubuntu. I have Lucid Lynx on my laptop, with Windows Vista 32 bit along side of it. I have done some research, and found out thathe wireless connector on my laptop, a Broadcom BCM4312, doesn't work with Ubuntu 10.04. I know that I need a driver
View 3 Replies View RelatedI have a Broadcom BCM4311 wireless card on my Dell D620 laptop.
Code:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
Code:
sudo apt-get update
sudo apt-get --reinstall install bcmwl-kernel-source
I have a HP Mini 5105 SSD netbook, runing Ubuntu 10.10 with 2Gb RAM. My wireless card is a Broadcom BCM43224 802.11a/b/g/n. Its driver is enabled and running. The wired network connection runs fine too. The problem: Wireless stopped working. When I right click on the network icon, the enable network option is clicked, but the "enable wireless" option is listed in dark grey and cannot be clicked on. I have recently updated my kernel version to 2.6.35-24-generic. What I have already tried: this one too I got to know there seems to be a problem with the 2.6.35-24-generic kernel. I have gone into the GRUB menu (it took some time to find out that you have to keep the Shift key pressed during startup for the GRUB menu to show), chosen the older kernel version (2.6.35-23-generic) and then removed the faulty one. Nevertheless, nothing has changed. I still cannot enable the wireless. The outcome to lshw -C network is:
[code]...
Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies View RelatedEver since I upgraded to the new Ubuntu, I have been having problem with wireless. In the "Hardware Drivers" I come up with 2 drivers:
1) Boadcom B43 wireless driver
2) Broadcon STA wireless driver
I activated the first one, but latter noticed that the wireless was not working, so I tried installing the second and it returned this message:
Quote:
So I unactivated the first and then it disappeared leaving me with the second, and its error message.
Quote:
What should I do now?
The output for "lshw -C network":
Code:
The last few pages of /var/log/jockey.log.
Code:
after having tried out almost all suggestions found here and elsewhere on the internet, i'm somewhat at my wits end The situation: I'm running Kubuntu 32Bit Version (at the mom 10.4) on a HP-Compaq 6735s (AMD Processor, Vanilla 32Bit Install). My first Install was last year with 9.4 and the Broadcom 4322 wireless worked like a charm after installing the proprietary STA-driver under System -> Hardware Drivers. As the update didn't work out really without glitches, i did a fresh install and lost my wireless. I tried various combinations and tutorials but to no avail. My card is found, the driver installed, but i cannot access my access-point. I can SEE the access point (and all my neighbors'), but knetworkmanager does not seem to do anything. To be sure, I installed wicd (nice tool by the way). Trying a connect here told my my credentials were bad (incorrect passphrase for my WPA2 Personal auth), which is not true. I tried connecting without security, didn't get an IP. So it seems somehow the card is working, but all functions needed for passing information to the access-point are unavailable.
This is what I tried:
both broadcom-drivers
fw-cutter
installing the driver by hand
Installing the driver via Hardware Drivers produced the same results as any other, viz the card is working, but not connecting. Unfortunately knetworkmanagers error messages are a bit sparse, or rather non existant. My guess is that somehow the firmware is not properly loaded (or the wrong type??).
I have an HP 2133 Mini-Note [KX869AT] with a Broadcom 4312 wireless card. I've had Ubuntu 10.04 on my machine for a few weeks now and everything was great until my wireless card abruptly stopped working. It doesn't detect any wireless networks,uch less connect to them. I tried reinstalling the proprietary driver, but that hasn't worked.
View 1 Replies View RelatedWhen I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.
Code:
paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface
[code].....
I applied the latest updates today and when I rebooted, My wireless broadcom driver is not working and the ifconfig does not list it either anymore, was working 8 min ago but is now dead. If I turn off the wireless with a switch and back on, I get a blue light but it remains disabled and greyed out on the network icon. Ubuntu 10.04, latest updates applied daily. I removed the driver and reinstalled it, it did not help at all. Also, my Truecryt gdecrypt stopped working.
Update: it seems the wireless switch on the front of the laptop is now working backwards, in checking the daemon log I found Turning off the wifi so the light goes out:
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> WiFi now enabled by radio killswitch
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): bringing up device.
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): supplicant interface state: starting -> ready
[code]...
Update, I found that if I boot the laptop up with the networking switch off, then, after I'm booted up, turn it on, it works. However if I reboot the laptop with the network switch in the on position I get the above issue with the switch being inverted and not working properly.
How do you enable repos? Namely RPMFusion set? I have 2 repo's that are currently in stalled:
[root@dv5-1235 Joe]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
fedora Fedora 12 - x86_64 enabled: 19,122
updates Fedora 12 - x86_64 - Updates enabled: 755
repolist: 19,877
I'm trying to get my Broadcom 4312 working again since FC10. I noticed that RPMFusion isn't listed. This would answer why I can not install Broadcom -wl.