Fedora :: Using RPM Nvidia Drivers Or Building Them By Hand?
Aug 6, 2009
For a new project at work, I'm looking into building a processing farm of a few dozen Tesla 1U servers from Nvidia. This has lead us on to figure a way to let the developers run tests on their own workstations (with the appropriate gfx card).The cards we're looking at are Quadro FX 1800 or 3800's to provide quite a bit of poke.
Thing is, I'm having issues with running any Cuda code successfully on systems installed with the pre-built nvidia drivers from RPMFusion. I can only get code running if I download the nvidia or cuda drivers from nvidia and install by hand. Not something I'd like to be maintaining across all out developer workstations. Is anyone out there running Cuda on Fedora/RHEL5 platform? If so, are you using RPM nvidia drivers or building them by hand?
View 2 Replies
ADVERTISEMENT
Jan 22, 2009
I want to install Fedora 10 but need to build RAID (bcraid) drivers so the installation will see my RAID array. I'm currently running Fedora 6 & thought this would be the process:
1) Install kernel source
2) Modify configuration to include bcraid drivers.
3) Build new kernel
4) Replace kernel in standard build with custom kernel or load driver during installlation
5) Install Fedora 10
I'm stuck on no. 1. When I tried to install the kernel source, there was some problem with "mockbuild" (wot dat?) which I think was a red herring but I now don't know what to do about these unsatisfied dependencies:
[root@fedora6 ~]# rpm -Vp ~/Desktop/kernel-2.6.27.5-117.fc10.src.rpm
warning: /home/nick/Desktop/kernel-2.6.27.5-117.fc10.src.rpm: Header V3 DSA signature: NOKEY, key ID 4ebfc273
Unsatisfied dependencies for kernel-2.6.27.5-117.fc10.src: rpm-build >= 4.4.2.1-4
[code]....
View 4 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Mar 31, 2010
I've only a small /boot sector and
rpm -qa | grep kernel
kernel-2.6.31.12-174.2.22.fc12.i686
kernel-PAE-devel-2.6.32.9-70.fc12.i686
kernel-PAE-2.6.32.9-70.fc12.i686
kernel-2.6.32.9-67.fc12.i686
abrt-addon-kerneloops-1.0.8-2.fc12.i686
I'm using the PAE kernels, need the devs for nvidia kernel building,can I remove all the non PAE kernels without damage please?
View 14 Replies
View Related
Mar 12, 2010
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
View 4 Replies
View Related
Mar 17, 2010
Fairly recent enough system. nvidia 6200.
Full install of slackware. then i use these instructions to install drivers:
Quote:
Install nvidia driver in Slackware Linux
Before begin the nvidia driver installation, you must make a copy of the original /etc/X11/xorg.conf as a backup. Use the copy command example below:
If you choose to install the nvidia driver that you download from nvidia website, you must close kde or x-window and install the driver from Linux command line terminal.
Copy the driver to the directory that you placed all third party software such as /usr/local/src. This is not necessary, just a good habit. To install the driver, run the nvidia driver with the sh command like in the example below.
Now, you just need to answer all the questions to configure nvidia driver and the nvidia installation program will do the driver and kernel installation for you.
When i startx the computer freezes with an underscore in the top left hand of screen and i can't switch between tty's.
I know the pc and card work fine with other linux and win os's.
View 5 Replies
View Related
May 12, 2010
I have nividea 8400 gs geforce gpu. i need some help about my graphic driver. what driver i need for mu gpu in fedora. i did not find any drivers for fedora linux, all drivers is for windows platform.
View 1 Replies
View Related
Feb 13, 2011
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
View 13 Replies
View Related
Jun 16, 2011
I have Fedora 15 on my 64 bits PC, and i install the nvidia propetary driver using the rpm fusion repository and the metapackage "kmod-nividia".
The installation works fine, but the drivers not, it seems like Nouveau run's better.
So... can i uninstall the nvidia drivers and fedora automatically use Nouveau??, or the system loose both drivers?
View 3 Replies
View Related
Mar 13, 2009
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
View 4 Replies
View Related
Feb 1, 2010
I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64
[code]...
View 3 Replies
View Related
Mar 31, 2010
I tried again (with easylife this time) and I got the same result - once the kmod was finished I just got a cursor - so two tries with two different methods, same result. So, is there a generic type driver that will at least take advantage of some of the features of my geforce 6800?
View 10 Replies
View Related
Sep 8, 2010
I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies
View Related
Sep 14, 2010
I've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
View 7 Replies
View Related
Mar 9, 2011
I'm new to linux and am trying to install Nvidia drivers on my system. The install says to :-
1. install Binutils (which i've managed to do)
2.stop the X service from running (here I'm having problems)
I've tried "X -terminate" but I just get an error message. point to how I can terminate the service.
View 12 Replies
View Related
Jun 17, 2011
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
View 2 Replies
View Related
Dec 3, 2010
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies
View Related
Nov 20, 2009
After searching online and in these forums I found two different ways of installing the Nvidia drivers in fedora 12. If you haven't yet installed the the repos then:
Code:
su
rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
First way:
as su
(1)
yum --enablerepo=rp*g install kmod-nvidia.$(uname -m) xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64
[Code]...
I used the first way and everything seems to work fine. Compiz-fusion works good but i did have to add vga=795 to /boot/grub/grub.conf to get the graphical boot loader to work again. Should I have used the second method? What is the difference in these two ways? Most notably the second steps. Is one way better or preferred over the other? From my understanding you must do this because of the nouveau driver.
View 10 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Feb 19, 2009
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
View 9 Replies
View Related
Oct 3, 2009
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
View 6 Replies
View Related
Mar 4, 2010
I got fedora 12 like 2 weeks ago. I am newb in using linux. I got enough of the problems windows 7 has and thought to change on something good and free . It seems OK but i want to try play some online games on fedora. Seemed it did not have video card drivers installed and tried to install them. Once i installed some kind of video drivers using a yum command i found on web. But i think something was wrong because when i tried the first game installed with wine it worked as if i didn't have video card . Even yahoo messenger works very bad as if i won't have video drivers. I remember at the middle of that installation it shown kind of error like it did not find something.i don't remember exactly what it shown because immediately after that it continued to install video card drivers. But after i tried that game it still seemed something wrong happened. So....how can i see what video drivers i have installed ? Do i need to uninstall them before trying again? I got a CD with drivers when i got my notebook do you think those will work if i install them using wine ?
View 2 Replies
View Related
Mar 25, 2010
I want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.
View 1 Replies
View Related
Mar 31, 2010
Has anyone tried this with success?
View 5 Replies
View Related
Sep 25, 2010
I've done my best to fix this but, after encountering numerous problems, it's become apparent that while I might be a pretty good Windows user, I don't know bugger all about Linux and evidently you need to be 1337 just to install drivers, but anyway...
I have a NVIDIA 6800 GT graphics card, old but still functioning properly. Fedora 13 didn't install any drivers automatically, so I went to the NVIDIA site to see if they supported their cards under Linux. They did... sort of. It seems they only provide a 'generic' Linux display driver for x86 architectures, which wasn't preferable but it was the best I was going to get, so I downloaded it. Their site provides a setup Readme, but I've run into countless problems and finally I've come up against one that it doesn't document.
First was the fact that I couldn't install it with X window running. I assume this is the base UI for Linux, so I rebooted into run level 3 and tried again, at which point it complained about a 'nouveau' process still running. I added the line rdblacklist=nouveau to my boot so that this wouldn't be enabled, but then it complains that my GCC is missing. So, I install the GNU Cross Compiler with the Fedora RPM manager, but now the setup complains that my 'kernel source tree' can't be found and asks me to install it - but what exactly is a kernel source tree anyway?
Log file outputs the following:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Sep 25 20:08:50 2010
installer version: 256.53
option status:
[Code]...
View 2 Replies
View Related
Dec 22, 2010
If anyone else out there is being driven crazy by the fact that their fonts are too big in KDE (with the proprietary nvidia driver), here's all the places you need to change it to make it work:
In /etc/X11/xorg.conf, under Identifier "Screen0", add:
Option "UseEdidDpi" "FALSE"
Option "DPI" "90x90"
[code]....
View 3 Replies
View Related
Jun 17, 2011
Today I finally could install Fedora 15 i686 in my now aging (2005) desktop computer (although I will always think of it as my "new machine", as long as I don't assemble a new one for me):
AMD Sempron 3100+ (1.8GHz)
1GB DDR400
120GB HDD
NVIDIA GeForce FX5200 (128MB)
After I installed F15 my initialpression was that it worked really good on that hardware: everything went fine with GNOME 3 for example,except for some lags in graphics rendering, which I thought would be solved after the graphics card's full power were unleashed with the proprietary NVIDIA driver.For starters I am not sure which Nvidia driver is right for my card (Nvidia 173.X or the regularvidia).I managed to get "working" the 173.X driver but the desktop is even less responsive to begin with, and there appears to be a lot of activity on the hard disk side.So, my question is, which could be causing the performance loss?
A. The "small" RAM.
B. The vintage graphics card.
C. Some problem in the hard drive.
D. A known bug.
View 3 Replies
View Related
Aug 16, 2011
I I have been trying to get the Nvidia development drivers working for a good day or so.
I have the 280 drivers installed, but these don't allow CUDA development.
View 6 Replies
View Related
Jun 16, 2010
I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies
View Related
Jul 13, 2010
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies
View Related
