Whenever i try to veiw any file in nano through commandline by nano -w <file> it doesnt show my any data on that page it just open up a blank page bt when i installed it ie lst night it was showing the data of the file properlly now whats wrong with hat nano ?
View 7 RepliesOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedI tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies View RelatedI am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedWhen using gt5 in various directories on my system (including my home directory) I get blank results.
If I limit the max-depth enough, I get results. For example, in my home directory 'gt5 --max-depth 2' produces a listing, while 'gt5 --max-depth 3' produces a blank page.
I've noticed that the temporary html file that gets created in tmp (such as '/tmp/gt5.9035.kJVM08Y9/gt5.html' is a zero-byte file.
I can successfully do a du in the same directory (which is what I thought gt5 was using), so I'm not sure what to check?
I have created a php page with only
PHP Code:
<? php echo "OK"; ?>
in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream:
Code:
GET /services/test.php HTTP/1.1
Host: 192.168.1.5
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
I am fairly new to Red Hat. I installed it yesterday but i cannot login as root in the webadmin login page. I entered my root username and password and it just seem to sit there forever and after a while it displays a blank page. I verified that all the necessary services have started. I have been troubleshooting this since yesterday with no luck.
View 6 Replies View RelatedRecently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies View RelatedI'm trying to blind deluge torrent to port 80 but as I'm running already a server on this port, I've decided to use the ProxyPass option in a vhost. As I prefer running through HTTPS, I've used my vhost 443 that I already use for bind AjaxTerm (SSH with a web interface)
But whereas AjaxTerm works, Deluge doesn't...I only get a black page but the tab name is correct (ie, Deluge: Web UI 1.3.1)
Here is my vhost
Code:
<VirtualHost *:443>
SSLEngine On
SSLCertificateFile /etc/ssl/private/localhost.pem
ProxyRequests Off
[Code].....
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedI downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies View RelatedMy screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
How can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedI need to use visudo in order to make a shell script properly work, certain parts of it require that I can use sudo without being prompted to enter my password and I need to use visudo to properly edit sudoers. I cannot stand vi, I don't know how to use it very well, the documentation/manual is confusing and to be honest i would rather use nano, I personally hate vi or vim and would never in a million years want to use it. Is it possible in fedora 12 to change visudo to sue nano instead? I don't care if I have to recompile visudo to make this a possibility because it beats using vi any day of the week. (In fact I don't get why it is the default, it is very awkward!)
View 3 Replies View Relatedthat's pretty much about it. I just can't open the IMDB web page. It never loads and the page is just blank.The firefox tab says: "loading" and later says "the connection was reset" blablabla. It is the only web page that I can't view so far.
View 8 Replies View RelatedI cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
Freeze browser wait for end of loading URL datausing Namoroka firefox 3.6.4pre Ubuntu/9.10 karmicproblem started app 2-3 weeks ago, same time working on JAVA update.JAVA test OK .most download locations seems to freeze or not complete loadingonly forced close/reset af browser is helping.how to find the change causing this?
View 1 Replies View RelatedI like text and graphics large so i've used about:config in Firefox to set both the min and max zoom level at 120%, but want to firefox start using these settings. Once opened i can press ctrl and + to jump to 120% zoom and once i'm there my settings make me stay there no matter what. What i want is for Firefox to open at these settings.
View 9 Replies View RelatedI have started wvdial and able to ping all ips but not able to open any page in the browser
I dont have any proxy server.
I noticed a problem when editing files with nano. This problem happens if the terminal window that I run nano from is not wide enough to show the full line.By way of example below is part of my grub.conf
Code:
title Fedora (2.6.31.5-127.fc12.x86_64)
root (hd0,13)
kernel /boot/vmlinuz-2.6.31.5-127.fc12.x86_64 ro root=UUID=47e4c448-8087-4ec6-a67b-814845a598db noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us vga=0x370 nouveau.modeset=0
initrd /boot/initramfs-2.6.31.5-127.fc12.x86_64.img
If we assume the code box above is the size of the terminal window, if I edit anything past what will show as the $ sign in nano, it will automatically add a carriage return. So if we take the kernel line above, if say the screen shows at the end root=UUID=$, if say I were then to add 00 the end of the UUID, it will move everything starting from root=UUID= to a new line. Is there some wrap feature that is enable in Fedora for nano?
I Updated from Fedora 9 to Fedora 13 several months ago and noticed that AAC audio encoder was no more available in Avidemux (I use version 2.5.3.3 for fedora 13 from rpmfusion repo)Unfortunately AAC is mandatory on the IPod (and probably other Apple devices) to have the sound working.I had faad2-libs (decoder) and faac (encoder) packages installed, but avidemux was not using them.After some search on the web, I found that faac support was removed because of legal issues.Some people recommend to rebuild Avidemux from source but this was a little bit complicated, and I found an easier solution.
In fact the only thing needed to add AAC support to Avidemux is to add the required libADM_ae_faac.so library in /usr/lib/ADM_plugins/audioEncoders, as it is no more supplied in the package avidemux-plugins. Searching for libADM_ae_faac.so on the Web, I found some packages containing this file, such as the ones from other distros, and the package for the same Avidemux version than the one I use but for Fedora 11 : avidemux-plugins-2.5.3-3.fc11.i586.rpm.
I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
After installing a bunch of new updates with the update manager a few problems have popped up regarding the scrolling in firefox with the arrow keys. The first problem is that when I open up a new web page it does not automatically allow me to scroll. I have to first click the web page and then are the arrow keys enabled. The second problem that I have is that when I press the down arrow key to scroll down in the beginning it jumps down to the end of the page. The third and final problem is how it scrolls. For some reason a site in firefox acts like a word document. Instead of be the arrow keys controlling the scroll bar it controlls the little I symbol you see when typing.
It is amazing how annoying it can be when you can't scroll with the arrow keys. If nobody knows how to then I will probably just reinstall firefox. I have also just figured out that page up and down also do not work.
I have worked with xampp on windows. Its my first time with Red Hat Enterprise Linux 5 .
Problem Is In My company we have redhat entprise 5 and its running well with samba server for our intranet. I wants to upgrade the intranet by using joomla. Problem is i have installed the xampp succesfully but when i type [url] it still opens our old intranet's homepage.
I have been trying the Open Office web page creator. In Presentation under options, wizard, the web.Two questions come to mind. How can I get an older document into the page for test viewing? Does the document have to be a certain kind? When I put one in, it looks like a link and will not open, I want it to be there in full straight off.And creating an email, can it be the new one the host will maintain for me as I pay?
User name and passwords, are an agreement between myself and the host company?Upload by FTP, I must get the FTP address first from the host?Is there a tutorial here or elsewhere for Open Office Presentation?
I have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.