Ubuntu Installation :: USB Drive Boot - Blank Page With Blinking Cursor
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
ADVERTISEMENT
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Mar 11, 2011
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L
[code]...
View 1 Replies
View Related
Aug 4, 2011
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies
View Related
Mar 8, 2011
I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
View 1 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 7 Replies
View Related
Nov 13, 2010
After installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
View 1 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2. I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation. Also I am not able to install anything using YUM. It gives the following error:
Code:
[error 14] PYCURL ERROR 6-""
I work behind a proxy.
Please help as to how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 1 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
Mar 30, 2011
Trying to hibernate causes a blank screen to show up with a blinking text cursor. I have to force restart to get it working again.
View 2 Replies
View Related
Sep 28, 2010
I have reinstalled the OS a couple times now. Not sure what else to check.(noobie)Its on a RAID 1 controller, so I'm wondering if that has something to do with it
View 2 Replies
View Related
Aug 19, 2009
This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
View 1 Replies
View Related
Dec 27, 2010
Six months ago I installed Ubuntu 10.04 to my otherwise Win XP work laptop. I decided to continue to use Windows' boot loader as primary: I told the Ubuntu installer to put grub2 onto a separate partition, then used dd to copy the first 512 bytes into a file in my Windows C partition, then edited boot.ini to link to it - its a common technique that is described in many support forums and blogs. This worked fine, and continued to work until a few weeks ago. One day I chose the Ubuntu option at the Windows boot loader and got a blinking cursor at top left of screen and no grub2 menu. I was able to use SuperGrub2Disk to discover and boot from my grub2 install - so that didn't appear to be broken. I finally fixed it by dd'ing a fresh copy of the first 512 bytes of my /boot partition over to the Windows C partition. So somehow the Windows boot loader decided it no longer liked my original dd'ed file.
The only things I can think of that might have changed and caused this to happen are (on Ubuntu) an update to security packages using the graphical update manager that pops up (I rarely do a command line apt-get upgrade/dist-upgrade and certainly not in this time frame) and (on Windows) a Windows Update - as it is a work laptop I tend to take whatever essential updates it suggests. As you can see I managed to fix the problem. However does anybody have any similar experience or any explanation why this may have happened? Could an over-zealous Windows Update have caused it?
View 4 Replies
View Related
Feb 1, 2011
I tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.
after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:
boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0
[code]...
View 8 Replies
View Related
Feb 27, 2010
I have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
yum install libXv.i686*
yum install libXScrnSaver.i686*
yum install qt.i686
yum install qt-x11*.i686
yum install libsigc++ libsigc++.i686 qt.i686 qt
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
View 1 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
Jul 9, 2011
My new PC fails boot when having my IDE DVD drive connected. If the drive is removed the OS boots up without any issue. Once the PC is powered ON, the grub menu shows up, but when Ubuntu 10.10 is selected I get a blank screen with a blinking cursor on the top left corner and I have only option to force shutdown the CPU.ON selecting windows 7 i'm able to boot successfully and use the DVD drive without any problems.
View 1 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
May 17, 2011
I have a machine with Squeeze that currently boots from an USB thumb drive (that was the only drive on that box, referenced as SDA in /dev... Yep, no optical drive or HDD). I have installed an SSD on that machine. It is referenced a SDA, and the thumb drive has been nudged to SDB. I'd like to boot from the SSD and ditch the thumb.
I've partitioned and formatted the new Disk (ext4), created a swap file (to keep things simple, no swap partition), and used rsync -Sax / /media/USB0/ to clone the content of the root FS. I've edited the fstab file of the SSD to match the config (uuid of the drive, ext4 FS, swap file) then use grub-mkconfig -o /media/USB0/boot/grub/grub.cfg (I apt-get installed grub 2)
I've set the SSD as first boot device in the BIOS. Now when I boot from the SSD, all I get is a blinking cursor at the top of the screen (the thumb drive still boots fine). I guess I missed something .
I've been struggling with this for about 2 hours now (not the grub issue, the whole mess). I've tried googling this last problem, then searched this forum with no luck (I usually find stuff about people who want to boot from a drive other than the first one and must daisy-chain grub).
Bootloaders (and low level linux stuff) are new to me. I'm afraid to botch the bootloader of the thumb drive (grub 1.9x), and to be locked out of the machine.
View 12 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Oct 20, 2010
I have a box with lucid I rarely boot. When I do there is usually some trouble, as now. The only thing that happens is that a blinking cursor appear, and nothing happens. Usually the box also never shutdown, I end up with having to hardboot it.
What causes this, is there anything I can do to fix it? As of now I can't get the beast back up. I'm running x64, a cheap raedon 5xxx card and an amd x4 processor.
View 3 Replies
View Related
May 3, 2010
I am getting a much slower boot with the 10.04 upgrade. After choosing which partition to use I get the blinking white cursor in the upper left hand corner and the "Boot from (hd0,4) ext 3..." sits there for a while before coming to the log in screen. There have been quite a few posts about this, a lot of people are saying disabling the floppy drive in the BIOS has worked for them. I don't have a floppy drive on my laptop.
View 9 Replies
View Related
May 1, 2010
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies
View Related
May 31, 2011
Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:
Code:
grub> root (hd0,4)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default
and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.
Maybe additional boot parameters?
Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:
Code:
title openSUSE 11.4
root (hd0,4)
kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5
initrd /boot/initrd-2.6.37.1-1.2-default
(I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)
View 4 Replies
View Related
Aug 20, 2011
Im using 5.6 DVD install to a HW raid1 Card (2 x SSDs in raid 1, Arcea Card Natively recognized by centos anaconda).I select to wipe the entire drive and remove ALL partitions (ive also tried setting this to just remove linux partitions). The install location (raid drive) is /dev/sdh the A-G are other 1.5TB drives.I also un-check EVERY drive except the raid drive (sdh). it then asks me if it ok to wipe/reformat drive (Prompts Yes or No, i click yes)Every time i do this install i get the blinking cursor after post. Im told this means i dont have GRUB installed, i do NOT disable grub or anything related to the boot-loader in anaconda installer (all those setting are left at default). ive also tried setting this to NO boot loader, and i get the same result.
This DOES work as i have gotten it to install and run prefect for a few weeks. I think what i did then was removed ALL THE DRIVES except teh raid drive, and then did the install then. This way the install drive was /dev/sdA and all worked, even when i added the drives back online after the install, the machine ran great and booted several times this way (i had to do a os re-install or else i would have left it as is.)YES bios is 100% set to the raid card as the first device to boot from, Centos 6 installed to the same raid drive boots and works great - but i need 5.6.no google help on this one, searched hard, only one article on Ubuntu doing this all the time.also everytime im retrying to install 5.6, i go into the HW raid card's bios and delete and recreate the raid1 volume (it takes about 10 min for it to format and initialize the raid1 array
View 2 Replies
View Related
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Mar 9, 2011
I am trying to install any version of ubuntu (I even tried so far another version called jollicloud) but the result is always the same...The computer is a Dell Mini 9. I have pulled out it's SSD because it has broken.I managed to install about some months ago an ubuntu netbook version (10.04, not sure) which all worked fine from a 8GB usb stick Here are my steps:
1. Download ubuntu either netbook or standard version
2. Make a bootable flash with Unetbootin from ubuntu or other programs from windows
3. Put the flash disk and the second 8GB flash to the dell mini 9
4. Boot Ubuntu live from the first flash (sometimes I think I must put the second flash after the boot so it finds only the live version... If I have put both flashes sometimes it won' t boot)
5. install ubuntu to the other flash (to the 8GB flash drive)
6. reboot
and then...only a blinking cursor is appearing to the top left of the screen with nothing else happening...Shift does not do anything.I have some suspicion that there is no Grub at all but I am not sure for this.I am sure there is a way to make it because I ve done it before, but I don't remeber how!
View 3 Replies
View Related
