I am fairly new to Red Hat. I installed it yesterday but i cannot login as root in the webadmin login page. I entered my root username and password and it just seem to sit there forever and after a while it displays a blank page. I verified that all the necessary services have started. I have been troubleshooting this since yesterday with no luck.
View 6 RepliesMy screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
I have opensuse 11.4 installed with both gnome and kde. These are the things I did before the problem:
1. changed the login screen to oxygen login screen
2. Then I logged off and when again logging in, I chose the session as Metacity.
But unfortunately, the the blank splash screen appeared and it didnt get into the desktop. Then I did a hard restart (By pressing the power button). Since then, I cannot login. The login screen is blank left only a active mouse pointer. Even booting into failsafe also didnt work.
By the way, I have chosen the option of directly logging in without password prompt at login. (during installation)
Only a week before i did a clean install since i corrupted the grub, dont wanna install again.
On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedLinux version 2.6.18-194.el5 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Mar 16 21:52:43 EDT 2010Am using VWware ESX to host this guest operating system. When it clears post, the screen goes to the red background you typically see right before the login prompt comes up... but it never does. If the machine made it on the wire I can putty to it, but through deploying these, the machine isn't always on the wire and I need to be able to use VMware's viewer to gain access to it
View 2 Replies View RelatedWhen using gt5 in various directories on my system (including my home directory) I get blank results.
If I limit the max-depth enough, I get results. For example, in my home directory 'gt5 --max-depth 2' produces a listing, while 'gt5 --max-depth 3' produces a blank page.
I've noticed that the temporary html file that gets created in tmp (such as '/tmp/gt5.9035.kJVM08Y9/gt5.html' is a zero-byte file.
I can successfully do a du in the same directory (which is what I thought gt5 was using), so I'm not sure what to check?
I setup a web server on Suse 11.3 using the "Perfect Server" tutorial on HowtoForge with Ispconfig 2 everything works accept php. Pages only display the page code. Here is the output of the " php -r 'phpinfo();' " command
Code:
phpinfo()
PHP Version => 5.3.3
System => Linux vserver2 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 x86_64
Server API => Command Line Interface
Virtual Directory Support => disabled
[Code]....
I've installed qmailtoaster on CentOS. I use vqadmin for managing virtual domain. I can list the current domains on vqadmin interface. But when I choose "View Domain", enter a my domain and choose "View Domain", I receive a white page. I can't view the information about my domain. Please help me to resolve the problem. I can create a new domain and view the domain on vqadmin but I can't view the existing domains.
View 1 Replies View RelatedWriting this from the windows box since my problem is php pages display blank in any web browser on my kids computer running 10.10. and the forums are php based.All the threads I have seen are from people with a local apache server and php server running. This is just a workstation and nothing server like installed (well not apache or php anyway)so everything I have found tells me to check config files that of course are not there.Anyway since his favorite web game is php based he is currently a bit upset. It did work when I initially installed 10.10 on a full flatten and reload.
View 2 Replies View RelatedI have been using ubuntu netbook 10.10 on my Dell Mini 9 for the past few month without any problem; it connects wirelessly to the internet via a wireless router. Yesterday in the middle of web surfing, suddently firefox cannot see any website outside of my home network (Firefox displays Server not found page). No help when I rebooted a few times and connect to my home network via wireless or even wire cable; it can access files in my network file server (DNS-321) but not the internet. My desktop computer running Windows Vista and ASUS media player has no problem accessing the internet.
View 1 Replies View RelatedOriginally Posted by van 2.0 If you are not having a problem with Samba and have nothing to offer the OP in his bid to solve the problem then your post is not relevant to the discussion. The reason I asked you to point out where SELinux has been mentioned is that those are the docs of an Enterprise OS and any relevant steps would be included.I see you are new to SELinux, but interrupting a post to point out something unrelated does not help, it just adds confusion and consternation.I think that, perhaps in your your zeal to serve as police officer of the relevance trees, you've failed to see the forest. It could be that I was not sufficiently clear in my first post here, so I'll explain it very, very slowly and carefully, so as not to cause any you any further confusion.
The original poster is unable to access his Samba shares. The original poster does not understand why and seems to think that it is configured correctly. Other posters have added suggestions about smbpasswd and testparm to check for correct syntax. Presumably, these things have not yet solved the problem, since the OP has not returned to say the problem is solved, though you linking to one of the first links that would appear in a google search for redhat and samba was no doubt wildly and extraordinarily helpful.
So, I had an idea. I recognized that, in a crazy plan to make a functional OS, the authors of Linux had allowed more than one binary to execute simultaneously. This means, that SELinux and samba can both run at the same time. Now, stay with me here - if SELinux is not configured to allow permissions for the samba user on the Samba share.... "permission denied" log errors can occur in Samba. Now, that sounds familiar for some reason. Hmmm... oh, yeah! That was what the original poster mentioned! And, I just dealt with that exact problem, caused by insufficient SELinux permissions!I knew there was a method to my madness.So, anyway, adopting your own ironically sanctimonious tone, I hope you've learned a lesson today that can improve the quality of your posting. This lesson is two-fold: (1) it's not especially good form to quibble with someone trying to help in good faith and (2) if you are going to, it pays to have something tangible to offer to go along with your condescension.No need to thank me - helping you be a better poster is its own reward, and I'm rapidly losing interest in anything you have to say in general, anyway. From what I've seen, it's not anything I couldn't find in under 10 seconds on google.
I'm on HP tx2000 Tablet PC, with nVidia GeForce 6150 Go onboard, 4GB of RAM, Ubuntu 10.04 amd64 Desktop. I keep getting a blank screen after boot splash when I'm on BATTERY POWER. Though I get a blank screen, the screen comes alive when I SUSPEND the laptop by closing the lid, and then RESUME the laptop. Then I can see the logon box and whole desktop.
Usually people get problem by suspending their laptops (usually the screen not coming back after resuming), but now I SOLVE the problem by suspending my laptop. Well like I said I can somehow get the screen right, but I really can't (and don't want to) suspend and resume my laptop every time I boot. Problem occurs REGARDLESS of type of display driver I use. nVidia proprietary, nouveau... whichever driver I use, I get the same conclusion.
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedRecently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies View Relatedwhen i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedMy gnome screen goes blank for a particular user,for the rest of the user i'm able to login in the gnome GUI,it's was working fine till now.
View 5 Replies View Relatedwhen I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies View RelatedI'm relatively new at Linux, and I am trying to get Nagios to work correctly. I'm running CentOS if that matters. I think I followed the directions here correctly, but all I get is a blank white screen after I login. The documentation page works fine, but I don't see anything on the main http://localhost/nagios page. I have looked at other solutions to this problem (adding the correct path to the open_basedir in /etc/php.ini) and that still did nothing. Any Way to decode my httpd logs... Any time I refresh, I get these four errors from /var/log/httpd/error_log:
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
I was doing some thing on networking on virtual machine (rhel 3 as guest os) and winxp as host .. now when i started my guest os (linux) the login page letters (like username and password) size became very large so that i could not see them (crossed the screen) .
View 1 Replies View RelatedI had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies View RelatedWhenever i try to veiw any file in nano through commandline by nano -w <file> it doesnt show my any data on that page it just open up a blank page bt when i installed it ie lst night it was showing the data of the file properlly now whats wrong with hat nano ?
View 7 Replies View RelatedI have created a php page with only
PHP Code:
<? php echo "OK"; ?>
in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream:
Code:
GET /services/test.php HTTP/1.1
Host: 192.168.1.5
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
This is a very trivial thing, but when I SSH into my newly updated 10.04 server, the stats of the server are displayed on the screen twice. How can i fix it to just display once? This is what it is doing.Quote:Linux xxxxx 2.6.32-21-generic-pae #32-Ubuntu SMP Fri Apr 16 09:39:35 UTC 2010 i686 GNU/LinuxUbuntu 10.04 LTS
Welcome to Ubuntu!
* Documentation: https://help.ubuntu.com/
System information as of Tue May 4 08:41:22 EDT 2010
[code]....
I am trying to put FC12 on a new Dell E6410 (laptop) with video "00:02.0 VGA compatible controller: Intel Corporation Device 0046 (rev 02)". I used the Live disk and successfully installed, but then I updated. Thereafter when I boot I get a black screen. I cannot even get to the login.
Unfortunately I really do not know where to start to try to trouble shoot. (I can get into run level 3 on the latest kernel). Also the issue seems to come about from kernel 2.6.31.5 to kernel 2.6.32.12 since the blank screen issue does not arise in the former. For now I switched the order of these kernel in GRUB so the older one boots first and this seems to work.
Although the blank screen is my most pressing issue, I am having others too (synaptic mouse, wifi, suspend, internal camera). Well, hopefully once I can run the newest kernel these issue will disappear.
After a lot of work, I think I have successfully written a script that displays the last login times of all users on a system. It gets the list of users from the directories in the /home folder and then finds the latest entry from the 'last' command for their login times. This may be a useful script for admins out there
I am not at all sure this is the best way of doing this or that there aren't ways that this script fails. At the moment, there are no users on my test system who haven't logged in so I am not actually sure that feature works. I imagine it does though. Please feel free to copy/use and/or criticize/correct. I would love it if we can make this script better. Take a look:
Code:
Well this problem has been here since Lucid. When I start up my computer and select Ubuntu, I get a blinking underscore for about most of the start up time for Ubuntu. Then It quickly shows the nice Ubuntu Loading Screen (Plymouth) for about two seconds, then it gets to the login screen. I am using the Open Source ATI drivers, I believe the open drivers are called "radeon".
View 5 Replies View RelatedI'm trying to blind deluge torrent to port 80 but as I'm running already a server on this port, I've decided to use the ProxyPass option in a vhost. As I prefer running through HTTPS, I've used my vhost 443 that I already use for bind AjaxTerm (SSH with a web interface)
But whereas AjaxTerm works, Deluge doesn't...I only get a black page but the tab name is correct (ie, Deluge: Web UI 1.3.1)
Here is my vhost
Code:
<VirtualHost *:443>
SSLEngine On
SSLCertificateFile /etc/ssl/private/localhost.pem
ProxyRequests Off
[Code].....
Today, the power was suddenly cut off in my house, then my home Ubuntu Server restarted after the power on, but when I use my laptop to view my wesite, the index.html suddenly became blank page, I did clear the firefox cache, doesn't work, still blank, and I changed browser, to seamonkey, the index.html still was blank, so, I am sure that the problem is coused by the server, and then, I put the index.html file to a subdirectory, which under the /var/www/home/index.html, and then I put the address < [url] > ,then,I can view my website the main page index.html.
View 2 Replies View RelatedI downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies View RelatedI've successfully joined my 8.04 LTS samba file server to the windows domain. I've read many tutorials like [URL].I used krb5 and winbind and not modern likewise-open. I had successfully got the ticket for the user under whom I was able to join to AD. I'm able to get domain controller information with net ads info. But I can't login to that server through ssh (I'm using Putty at windows XP) with any ADuser credentials. I've tried
windomainADuser
ADuser@windomain
ADuser
I only get user@10.0.0.10'password prompt and access denied.