Fedora :: Missing Packages In Netbeans After Upgrade From F11 To F13?

Jun 21, 2010

I upgraded from fedora 11 to fedora 13 which upgraded Netbeans from 6.5 to 6.8. Now 6.8 complains that package javax.persistence does not exist. Is this a fedora problem or a Netbeans problem? I've looked in the netbeans forums and can't find any discussion of this.

View 3 Replies


ADVERTISEMENT

Fedora :: Missing Python Packages Or Dependencies With F10->F12 Upgrade Breaks Yum?

Dec 15, 2009

I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:

Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.

Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.

View 1 Replies View Related

General :: Netbeans 6.8 On Ubuntu 10.04 - Add Php To Netbeans And When Type Gksu Netbeans - Open Without Php Editor

May 23, 2010

Netbeans 6.8 Ubuntu 10.04: I add php to netbeans and when I type $ gksu netbeans its open netbeans without php editor. Only when I type $ sudo netbeans its open it properly

View 1 Replies View Related

Debian :: Upgrade Netbeans IDE To 6.8?

Jan 30, 2010

Just used synaptic to install Netbeans IDE. I see that it is version 6.01
and the latest version of Netbeans is 6.8.

How do I upgrade my installation ? As there is no option to do so in the package manager?

View 12 Replies View Related

Ubuntu Installation :: Installed Netbeans Via Synaptic But When Click 'NetBeans' It Doesn't Open

Mar 24, 2010

Installed netbeans via synaptic but when I click 'NetBeans' it doesn't open... no error nothing

Tried running 'netbeans' in terminal and it's the same!

View 8 Replies View Related

Fedora :: Why The Qt-4.5.2 Packages Are Still Missing From 10

Jul 23, 2009

Anybody knows the reason why the qt-4.5.2 packages are still missing from fedora 10 and fedora 11 repositories? The corresponding packages for fedora 9 heve been released on july 18...

View 1 Replies View Related

Ubuntu :: OS Upgrade Causing NetBeans To Fail

May 7, 2010

I recently upgraded to 10.04 and now netbeans is not working. It worked fine the first restart after i upgraded so i thought all was good. This morning i ran it and it said something about not being able to load some modules. Since then, i've tried uninstalling it, re-installing it, and numerous restarts, all to no avail. I'm gonna try downloading the package from their website and running it from a separate install and see if that helps, but after that, I'm out of ideas.

When i run it either from the terminal or by clicking on it, it shows the loading screen, then the loading screen dissapears, then nothing else happens. In the terminal, it waits about ten seconds after the screen dissapears and the program seems to exit, since the terminal begins accepting commands once again.

View 4 Replies View Related

Ubuntu :: 10.10 Upgrade - Netbeans Borked / Solve This?

Oct 25, 2010

Upgraded to 10.10 seemingly OK but the latest NetBeans 6.9 (from 6. seems
borked,
On running for the first time it asked if I wanted to import the old settings and then said it couldnt.
Trying to build a new project from existing sources for some reason goes 2 directories up and tries to include everything from there!

View 1 Replies View Related

Programming :: Netbeans Cannot Find Stddef.h After Upgrade?

Sep 19, 2010

I recently upgraded from Ubuntu 10.04 to 10.10. All was going well until netbeans started throwing up errors about not being able to find the "stddef.h" header being called from the stdio and stdlib headers. Now I am unable to even initialize variables without failing.

I was using 6.9.1 from the netbeans website, but then I installed 6.9 from the repos alongside, and I still get the same error. Do I need to remove 6.9.1 ( I would rather remove it and keep the repo version), and if so, how do I do it?

where the stddef.h file is located so that I can replace it, or know of any work around?

View 3 Replies View Related

Fedora Installation :: 7 Packages Repository Missing

May 14, 2009

why the Fedora 7 Repository is missing? We run a number of Fedora 7 machines in the office and when I went to configure a local repository sync of Fedora 7, i noticed that [URL] no longer has any Fedora 7 packages? After looking at a few other mirror repositories, it seems this has synced down to the mirrors as well. Would like to know if anyone knows why this is the case and if the packages will be restored?

View 6 Replies View Related

Fedora Installation :: Which Repository For Missing Packages

Aug 23, 2011

I just did a clean install of F15 (32-bit) on a brand new 500 GB hard drive (partitioned and formatted in Win 7 (long 1.5 hr. format, no drive issues). Install was minimal, just Gnome desktop, and I have 894 software updates to do. I've twice started the updates and got two transaction-error dialogs, the first of which I noticed mentioned the Rawhide repository, so I added it to software sources and restarted the update. The second transaction-error dialog lists these files in details

gnome-shell-3.1.4-1.fc16.i686 requires libecal-1.2.so.9
xulrunner-6.0-2.fc15.i686 requires libhunspell-1.2.so.0
gnome-shell-3.1.4-1.fc16.i686 requires libedataserver-1.2.so.14
gnome-shell-3.1.4-1.fc16.i686 requires libebook-1.2.so.11 : gnome-shell-

[Code].....

but in which repository they can be found?

View 6 Replies View Related

Ubuntu :: Netbeans Load Errors After Upgrade / Sort It?

May 22, 2010

I am receiving a ton of errors when loading netbeans 6.8 on my Ubuntu 10.4 machine. code...

View 3 Replies View Related

Fedora :: Missing Virtual Consoles After Upgrading Packages?

Apr 4, 2010

I installed 64-bit Fedora 12, and everything was working fine. I upgraded a bunch of packages (including, but not limited to, X and Gnome) via yum, and now I'm unable to access virtual consoles. X works fine, but Ctrl-Alt-F2, etc. leads me to a black screen.

How do I get my virtual consoles back?

View 13 Replies View Related

Red Hat / Fedora :: Kickstart Missing Selected Packages On Install?

May 3, 2011

I am trying to use kickstart to create a master boot disk for all of my server installs. Unfortunately it seems to be missing some of the packages specified and I can't figure out why. Here is the packages section of my ks.cfg file

Note: all at symbols have been replaced with # because the forum filter seems to think they are urls.

%packages
#admin-tools
#base
#core
#dns-server

[Code].....

View 1 Replies View Related

Red Hat / Fedora :: Make Error During Compilation Of Tinyproxy 1.8.1 Missing Packages?

Mar 13, 2010

Linux mirage 2.6.18-128.1.6.el5 #1 SMP Tue Mar 24 12:10:27 EDT 2009 i686 i686 i386 GNU/Linux

I'm trying to compile tinyproxy for two days now on Redhat and can't seem to figure out whats missing here. The make bombs at:

Code: make[3]: Entering directory
GEN tinyproxy.conf.5
a2x: ERROR: xmllint --nonet --noout --valid /backup/builds/tinyproxy-1.8.1/docs/man5/tinyproxy.conf.xml returned non-zero exit status 4

[Code].....

View 4 Replies View Related

Fedora :: Gpodder Missing Dependencies - Unable To Locate Packages In F13 Repo

Jun 15, 2010

Code:

Missing components:

Is there a package that I can install that will satisfy this dependency? I am unable to locate anything other than the source here and here, but I'm also unsure if this is even the right package or if source this old is what gopdder is asking for. I'm looking for a package.

View 5 Replies View Related

General :: Header Border Frame Missing In Fedora After Update The Software Packages

Jul 14, 2011

After installing some Fedora software updates, I can no longer see the header frame in every window. Furthermore, I can't access any window frame after I open a new window frame.

How can I fix this? Can I remove all the updates I recently installed?

Note : After installing these update, when I reboot the system, I can see there are two version of Fedora.

View 1 Replies View Related

Fedora :: Yum Is Broken - Clean Up Packages After An Upgrade ?

Jun 13, 2010

I was trying to clean up packages after an upgrade and I broke yum.

Quote:

There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:

Please install a package which provides this module, or verify that the module is installed correctly.

It's possible that the above module doesn't match the current version of Python, which is:

Go to the yum faq at:[url]

I tried to download the RPM and install manually but I was getitng digest mismatch errors.

View 2 Replies View Related

Fedora :: Removing Unsupported Packages After Upgrade?

Sep 14, 2010

I recently did upgrade from F12 to F13 using preupgrade, and I was following the guide from the Fedora project website [URL]

On the section Removing unsupported packages it shows how to find orphaned packages and sugest you remove them. I tried that, found a bunch of packages that I promptly erased. But then I
came across

ModemManager-0.4-5.git20100720.fc12.x86_64

I thought "well I don't use a Modem" so I tried to yum erase it. I stopped when I saw that it was trying
to also remove the dependencies, a bunch of NetworkManager packages.

My question is, why is ModemManager flagged as an orphan if it has packages depending on it, isn't that wrong?

And also, the recommendation on the guide to remove these packages can be dangerous to people who don't pay attention (imagine someone accidentally removing NetworkManager, no internet).

I will keep the "orphaned" package out of necessity, but something is wrong in this whole deal.

View 3 Replies View Related

Fedora Installation :: 13 Upgrade: Remove Fc12 Packages?

Jun 7, 2010

I had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although

Code:

joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)

View 10 Replies View Related

Fedora :: Java Missing In Eclips After Upgrade From F10 To F11?

Jun 19, 2009

I recently upgraded from fedora 10 to fedora 11, everything seemed to go fine until I started eclipse and noticed that the java perspective was now missing. It was there before the upgrade, but something seems to be broken now. However, I can't find any error files, so I have no clue as to what may be broken. I looked around online to see if anyone else had a similar issue, but could not find anything that seemed to help. One site suggested that it was caused by not having the eclipse-jdt package installed, so I double checked that but already had it installed.

$ rpm -qa | grep -i eclipse | sort
eclipse-jdt-3.4.2-9.fc11.x86_64
eclipse-platform-3.4.2-9.fc11.x86_64

[code].....

Another site said that something in my .eclipse directory might have been corrupted and suggested moving it and letting eclipse create a new one, but this all did not . I was unable to find any other information about what could be causing this or how to fix it.

View 4 Replies View Related

Fedora Installation :: F9 To F11 Upgrade - Dependency Missing

Oct 9, 2009

I have just upgraded from F9 to F11. There are a lot of problems I appear to be having with dependencies.

yum update produces the following (the bits before appear ok):
Code:
Processing Dependency: libslapd_db-4.4.so()(64bit) for package: openldap-debuginfo
--> Finished Dependency Resolution
vlc-core-0.9.9-2.fc9.1.x86_64 from installed has depsolving problems
--> Missing Dependency: libass.so.3()(64bit) is needed by package vlc-core-0.9.9-2.fc9.1.x86_64 (installed)
openldap-debuginfo-2.4.10-2.fc9.x86_64 from installed has depsolving problems
--> Missing Dependency: libslapd_db-4.4.so()(64bit) is needed by package openldap-debuginfo-2.4.10-2.fc9.x86_64 (installed)
vlc-0.9.9-2.fc9.1.x86_64 from installed has depsolving problems
--> Missing Dependency: dejavu-fonts is needed by package vlc-0.9.9-2.fc9.1.x86_64 (installed)
devede-3.12c-3.fc9.noarch from installed has depsolving problems
--> Missing Dependency: dejavu-fonts is needed by package devede-3.12c-3.fc9.noarch (installed)
Error: Missing Dependency: libass.so.3()(64bit) is needed by package vlc-core-0.9.9-2.fc9.1.x86_64 (installed)
Error: Missing Dependency: dejavu-fonts is needed by package devede-3.12c-3.fc9.noarch (installed)
Error: Missing Dependency: libslapd_db-4.4.so()(64bit) is needed by package openldap-debuginfo-2.4.10-2.fc9.x86_64 (installed)
Error: Missing Dependency: dejavu-fonts is needed by package vlc-0.9.9-2.fc9.1.x86_64 (installed)
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest

View 7 Replies View Related

Fedora :: Fedora 11 Upgrade With LVM Missing /boot Partition?

Oct 14, 2009

I've just (finally!) gotten around to upgrading a couple of machines at a company I do some work for. One machine had a problem when I rebooted onto the new system. During the boot sequence, when it was checking and mounting the filesystems, it was unable to find the /boot partition. Now, this machine does run LVM on all but the /boot partition. The two SATA drives are mirrored, and they have the same partition layout:

Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[code]....

I got the system to boot by commenting out the /boot partition in /etc/fstab, but this is certainly only a temporary solution. The other system that I upgraded came up just fine, as have several of my own. Unfortunately, I am doing these two systems by remote control via ssh as I have only limited plysical access to them. (I did have to get to it to figure out why it didn't boot up..)

View 3 Replies View Related

Fedora :: Claws Mail 3.7.3 - Missing Toolbar After FC Upgrade

Dec 8, 2009

I just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.

View 2 Replies View Related

Fedora Installation :: Safely Remove Unsupported Packages After FC13 Upgrade?

Jun 2, 2010

I managed to successfully upgrade FC11 to FC13. While doing the post upgrade steps, I made a HUGE mistake. After identifying the unsupported packages, I used "yum remove package1 package2" command to remove the obsoleted ones without realizing the yum was also removing many FC13 packages! Here are the cmd sequence used:

# package-cleanup --orphans
...
# yum remove compat-db45-4.5.20-5.fc10.i386 flash-plugin-10.0.32.18-release.i386 gnome-spell-1.0.8-5.fc9.i386 ifd-egate-0.05-21.i586

[code]....

I simply typed Yes and left unattended for a few minutes after yum prompted there were # of packages to be removed as I blindly believed it would do the job. After returning to the computer, I found many installed icons were disappearing, the wireless suddenly turned off etc. I killed the yum process right away but it was too late.

-Is there anything I could do to undo the yum remove process?

-How to safely remove supported packages?

View 14 Replies View Related

Fedora :: Removing Duplicate I386 Packages On A X86_64 System After A Pre-Upgrade From FC8-FC10

Oct 19, 2009

I recently upgraded my x86_64 system from FC8 to FC10 using Pre-Upgrade. (related blog link) It appears that the upgrade process installed a steaming pile of i386 packages that are duplicates of existing x86_64 packages. I now get update errors because of this package clash. I have searched the fora and the most progress I've been able to make so far is: I apparently had 8 unfinished yum transactions so I did yum-complete-transaction 8 times and have no more incomplete transactions.

The output of package-cleanup --dupes is not very helpful:

Code:

[tim@servy ~]$ sudo package-cleanup --dupes
Setting up yum
Loaded plugins: refresh-packagekit

Yet I still get transaction errors when I run updates via synaptic. It checks dependencies and downloads everything and errs when testing changes. This is the error it gives at the moment:

Code:

Test Transaction Errors: file /etc/gconf/schemas/gweather.schemas from install of libgweather-2.24.2-1.fc10.x86_64 conflicts with file from package gnome-applets-1:2.20.1-1.fc8.i386

[code]...

View 14 Replies View Related

Fedora Installation :: Missing Data In Logical Volume /work After Upgrade From F9 To F10

Jan 10, 2009

I've just upgraded from F9 to F10. I can boot okay but I seem to have lost some data in one of my logical volumes. My drive is organised as follows:

/dev/mapper/main_group-various: UUID="f7c452cf-9f03-4f97-8676-b71b07a812aa" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-root: UUID="173f1845-72c9-49e8-9d49-2a5776c4267c" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-music: UUID="f5411861-4614-4652-a5f5-a3a8c2efcdd3" TYPE="ext3" SEC_TYPE="ext2"

[code].....

The logical volume for work still seems to be there. I presume (and hope) that all the information in /dev/main_group/work is still there. How can the folders in /dev/main_group/work be retrieved?

View 1 Replies View Related

Ubuntu Installation :: Upgrades Held Back - Two Packages - Grayed Out And Do Not Upgrade In Upgrade-manager

Mar 29, 2010

I'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.

If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager

The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.

View 1 Replies View Related

Fedora :: 12 Netbeans IDE Very Slow?

Apr 28, 2010

i installed Netbeans on Fedora 12 (Gnome - 64bit) and its very slow. I get same poor performance with OpenJRE and SunJRE. My pc specs are : HD3870 ATI, AMD x2 5000+ @ 3.2ghz, 3gb DDR2 800++mhz RAM.

View 7 Replies View Related

Fedora :: How To Uninstall Netbeans IDE

May 28, 2010

I used Netbeans IDE 6.8, then I updated, it error. Now I want to uninstall it, before reinstall it. Now,How to uninstall?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved