I recently upgraded to 10.04 and now netbeans is not working. It worked fine the first restart after i upgraded so i thought all was good. This morning i ran it and it said something about not being able to load some modules. Since then, i've tried uninstalling it, re-installing it, and numerous restarts, all to no avail. I'm gonna try downloading the package from their website and running it from a separate install and see if that helps, but after that, I'm out of ideas.
When i run it either from the terminal or by clicking on it, it shows the loading screen, then the loading screen dissapears, then nothing else happens. In the terminal, it waits about ten seconds after the screen dissapears and the program seems to exit, since the terminal begins accepting commands once again.
I bought an RTL8187L USB wireless adapter, and have had trouble getting it to work. I have managed to get it to work via manually configuringtime, but lost that configuration, and now it is once again not workingThe root issue appears to be (if I'm understanding correctly what I'm seeing) that when I connect, routes don't get setup properly, so when network manager (or WICD, which I've also tried) get to the DHCP step, my wireless router can't be reached by dhclient.
This is on Ubuntu 9.10, and I'm using the updated driver from realtek.com, btw, though the in-kernel driver was exhibiting the same behavior.So, two questions:- Is anyone familiar with this problem, and is there a fix available?- I believe I can work around it by setting up routes manually (e.g. with a post-connect script in WICD), but after staring at the "route" manpage, I'm not 100% sure of the commands. My router (a FIOS MI424WR) is my DHCP server, and is at 192.168.1.1, and route -n on a working PC (wired connection) gives:
Code: dave@MinasTirith:~$ route -n Kernel IP routing table
Upgraded to 10.10 seemingly OK but the latest NetBeans 6.9 (from 6. seems borked, On running for the first time it asked if I wanted to import the old settings and then said it couldnt. Trying to build a new project from existing sources for some reason goes 2 directories up and tries to include everything from there!
I upgraded from fedora 11 to fedora 13 which upgraded Netbeans from 6.5 to 6.8. Now 6.8 complains that package javax.persistence does not exist. Is this a fedora problem or a Netbeans problem? I've looked in the netbeans forums and can't find any discussion of this.
I recently upgraded from Ubuntu 10.04 to 10.10. All was going well until netbeans started throwing up errors about not being able to find the "stddef.h" header being called from the stdio and stdlib headers. Now I am unable to even initialize variables without failing.
I was using 6.9.1 from the netbeans website, but then I installed 6.9 from the repos alongside, and I still get the same error. Do I need to remove 6.9.1 ( I would rather remove it and keep the repo version), and if so, how do I do it?
where the stddef.h file is located so that I can replace it, or know of any work around?
Fail the upgrading... Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.
This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
After upgrading to 10.4, Eclipse started showing the the following error:
Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl-1 in java.library.path no svnjavahl-1 in java.library.path no svnjavahl in java.library.path java.library.path = /usr/lib/jvm/java-6-sun-188.8.131.52/jre/lib/i386/client:/usr/lib/jvm/java-6-sun-184.108.40.206/jre/lib/i386:/usr/lib/xulrunner-220.127.116.11:/usr/lib/xulrunner-18.104.22.168:/usr/java/packages/lib/i386:/lib:/usr/lib
I have a laptop running Ubuntu 10.04 and also two dual boot desktop machines, both running Windows XP and Ubuntu. I have upgraded one of the desktops to Ubuntu 10.04 and since doing so Thunderbird will not run on the laptop or the desktop. On clicking the launcher there are signs of activity for a few seconds and then they stop and Thunderbird fails to open. Also there is no longer any sound on the desktop that I have upgraded. I am reluctant now to upgrade the remaining desktop in case I have the same problems
how to get Thunderbird running again, please. I have already spent a week unsuccessfully trying to get the sound working and have abandoned it, but I would like Thunderbird to start running again.
I upgraded to 10.04 and cannot boot my system, even in recovery mode. No errors are shown, only some random color noise at the top of screen. I tried the 10.04 livecd and it doesnt boot eiter, it stops in busybox prompt with error: "Could not mount /dev/loop1 on /cow" or something like that. Before 9.10 was functioning perfectly.
The other evening I was in the lengthy process of upgrading from Ubuntu 9.10 to version 10.04. It had downloaded all the packages and was in the process of upgrading when a thunderstorm blew in. The power failed momentarily. The system crashed and the installation did not complete.
The system is dual boot to Windows XP. From GRUB when I try to boot Ubuntu the display goes dark, after a few seconds of the white Ubuntu logo. If I hit ENTER I get a flashing Cursor. I can boot to System Restore and get the Recovery Menu. I don't know if there is something I can do from there to repair/finish my upgrade, or even revert to version 9, when I could restart the upgrade.
Can I burn a Live CD for version 10.04 and finish the upgrade? This would salvage the settings, printer drivers, and other programs that I have installed. If I have to make a brand new installation I have to rebuild all of the things I spent many hours getting setup.
I need to determine which package is causing every upgrade installation or removal of software to fail in Ubuntu 10.04 I have had a problem since allowing some non-supported upgrades (not certain what they were for) in 9.10 (FAIL!) I hoped that upgrade to 10.04 would resolve the issue (I know FAIL again!). I am guessing I can;
a) Remove the offending package b) Repair the missing/damaged 10.04 files c) replace the 10.04 OS
I am running a dual boot one drive system with XP and Ubuntu each in their own partition and a 3rd partition where data resides
Yesterday I attempt to use update-manager to do a distribution update. all was going good. i went to the kitchen to get a coffee and returned to a black screen with no cursor. the install couldnot have finished as it was still downloading updates i believe.
on reboot gnome did not respond so my last resort was to use kde for the time being. by running update-manager through kde I successfully updated to ubuntu 10.10. After completion of the update i restarted and gnome still had a non respinsive black screen on login.
After upgrading my ubuntu server from 8.04 to 10.04 and then to 10.10, grub failed to load and showed a: L 99 99 99 99 99 99 99 99 ....
I restarted using a liveCD, mounted my boot partition as /boot and then "grub-install /dev/sdb" (sda is the usb drive now) so I have access to grub console, but I don't know how to recover my boot menu.
I also use LVM, but I don't know if this is relevant.
I wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?
And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.
So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.
I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.
I'm using Fedora 12 and today i was trying to upgrade it on F14 ...I download DVD from fedora site burn it on disc and start Upgrade...On start i get error that findutils is corrupted and i need to abort instalation... I think ok maybe disc is not good burned.. i Burn one more disc i test it its ok ... buti get same problem...Ok i try "Preupgrade" software.... he download all i reboot system, upgrade is start ...and... same problem finutils is coruppted... So now i cant upgrade F12 to F14 version...Icons are changed, for system version is F14... some data is changed to F14 some is still F12 + i lost Audio card so i don have sound :S
What can make me problem or how to solve? In upgrade.log in /root/ i have one line Upgrading findutils-4.5.9-2.fc14.x86_64
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
On my computer, I mount at boot time through the /etc/fstab some shares.I was working flawlessly on 9.04 and previous version.Since 9.10 version, it sometime fails to mount the share and I need to run PHP Code:sudo mount -a to get my mount shared mounted. (the command "mount -a" always work).