Anybody knows the reason why the qt-4.5.2 packages are still missing from fedora 10 and fedora 11 repositories? The corresponding packages for fedora 9 heve been released on july 18...
View 1 Replieswhy the Fedora 7 Repository is missing? We run a number of Fedora 7 machines in the office and when I went to configure a local repository sync of Fedora 7, i noticed that [URL] no longer has any Fedora 7 packages? After looking at a few other mirror repositories, it seems this has synced down to the mirrors as well. Would like to know if anyone knows why this is the case and if the packages will be restored?
View 6 Replies View RelatedI upgraded from fedora 11 to fedora 13 which upgraded Netbeans from 6.5 to 6.8. Now 6.8 complains that package javax.persistence does not exist. Is this a fedora problem or a Netbeans problem? I've looked in the netbeans forums and can't find any discussion of this.
View 3 Replies View RelatedI just did a clean install of F15 (32-bit) on a brand new 500 GB hard drive (partitioned and formatted in Win 7 (long 1.5 hr. format, no drive issues). Install was minimal, just Gnome desktop, and I have 894 software updates to do. I've twice started the updates and got two transaction-error dialogs, the first of which I noticed mentioned the Rawhide repository, so I added it to software sources and restarted the update. The second transaction-error dialog lists these files in details
gnome-shell-3.1.4-1.fc16.i686 requires libecal-1.2.so.9
xulrunner-6.0-2.fc15.i686 requires libhunspell-1.2.so.0
gnome-shell-3.1.4-1.fc16.i686 requires libedataserver-1.2.so.14
gnome-shell-3.1.4-1.fc16.i686 requires libebook-1.2.so.11 : gnome-shell-
[Code].....
but in which repository they can be found?
I installed 64-bit Fedora 12, and everything was working fine. I upgraded a bunch of packages (including, but not limited to, X and Gnome) via yum, and now I'm unable to access virtual consoles. X works fine, but Ctrl-Alt-F2, etc. leads me to a black screen.
How do I get my virtual consoles back?
I am trying to use kickstart to create a master boot disk for all of my server installs. Unfortunately it seems to be missing some of the packages specified and I can't figure out why. Here is the packages section of my ks.cfg file
Note: all at symbols have been replaced with # because the forum filter seems to think they are urls.
%packages
#admin-tools
#base
#core
#dns-server
[Code].....
I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
Linux mirage 2.6.18-128.1.6.el5 #1 SMP Tue Mar 24 12:10:27 EDT 2009 i686 i686 i386 GNU/Linux
I'm trying to compile tinyproxy for two days now on Redhat and can't seem to figure out whats missing here. The make bombs at:
Code: make[3]: Entering directory
GEN tinyproxy.conf.5
a2x: ERROR: xmllint --nonet --noout --valid /backup/builds/tinyproxy-1.8.1/docs/man5/tinyproxy.conf.xml returned non-zero exit status 4
[Code].....
Code:
Missing components:
Is there a package that I can install that will satisfy this dependency? I am unable to locate anything other than the source here and here, but I'm also unsure if this is even the right package or if source this old is what gopdder is asking for. I'm looking for a package.
After installing some Fedora software updates, I can no longer see the header frame in every window. Furthermore, I can't access any window frame after I open a new window frame.
How can I fix this? Can I remove all the updates I recently installed?
Note : After installing these update, when I reboot the system, I can see there are two version of Fedora.
just curious if there was some discussion about reasons (not)-including Lua in stock Slackware packages ? IMHO it perfectly fits to distro's KISS philosophy, is very small and packaging maintenance is very easy (only glibc dependency, simple compilation and installation proces). Slackware contains programming language implementations of Common Lisp, Guile Scheme, Ada 95 which I find more exotic then Lua in these days. I know there are some histroical reasons and keeping continuity but anyway ...
View 1 Replies View Relatednew installation of 11.2 when I try to follow the instructions in this thread
Code:
http://forums.opensuse.org/new-user-how-faq-read-only/407184-multi-media-restricted-format-installation-guide.html
I get messages saying packages are missing from packman I have the repo enabled it seems to complain a lot about libxine1, here's one of the error messages
Code:
Retrieving package libxine1-1.1.16.3-1.pm.25.1.x86_64 (1/19), 2.3 MiB (5.8 MiB unpacked) Retrieving: libxine1-1.1.16.3-1.pm.25.1.x86_64.rpm [error] File './x86_64/libxine1-1.1.16.3-1.pm.25.1.x86_64.rpm' not found on medium 'http://packman.jacobs-university.de/suse/11.2/
during installing tons of packages rather did not install/upgrade or where not found so now its done but audio slider from top bar is missing and so is a few things dont work now what can i do?
View 3 Replies View RelatedI made a script that, by using "rpmrebuild" (which is available on SourceForge and uses rpmbuild as its backend), recreates all the currently installed RPM packages and stores them in a user-defined directory.
Everything works like a charm, except for a few packages.
Those packages fail to build because some of the files they should contain are missing on the filesystem.
This is an example of the errors I get:
Code:
error: File not found: /etc/identd.key
File not found: /etc/identd.key
/usr/lib/rpmrebuild/rpmrebuild.sh: ERROR: package 'pidentd-3.0.14-5' build failed
error: File not found: /usr/share/ssl/certs/stunnel.pem
File not found: /usr/share/ssl/certs/stunnel.pem
/usr/lib/rpmrebuild/rpmrebuild.sh: ERROR: package 'stunnel-3.26-1.7.3' build failed
Is there a way to ask rpmbuild (because yes, rpmrebuild allows to pass parameters to rpmbuild) to *ignore* the missing files?
Looking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
I'm trying to get MRTG working on my Debian Lenny server. I have installed all trhe mrtg packages but when I invoke the mrtg command I get this: $ mrtg -c mrtg.cfg Can't locate MRTG_lib.pm in @INC (@INC contains:
[code]...
where is MRTG_lib.pm?? /usr/lib/mrtg is not there?
I tried to install Squeeze on a new laptop. The installation finished and I was able to log in, but a significant number of packages were missing, including network-manager and network-manager-gnome, OpenOffice, and gdebi. Everything under the System | Administration menu except Login Screen was missing. There's probably more missing, too, but I am not sure how to tell.
It happened a few times but with slightly different results (e.g. I think on one of the earlier install attempts, Iceweasel didn't get installed, but it was included in the most recent attempt). I tried installing using 6.0.1's CD 1, and 6.0.0's hybrid Live image on a USB stick (in both cases, the GNOME version). I had used the same USB stick to install Squeeze successfully on another laptop last week (i.e. I successfully got a complete, working install; I made no changes to the USB stick; then tried to install using it on this new laptop, and saw this behavior).
I tried using both the graphical and text installers. At the step asking what packages you want installed (which allows you to auto-install sshd or mail server, for example), each time I made no changes, so the 3 selected default settings (the first option, Desktop Environment, and the last 2 options, laptop and... whatever the other one is, I don't remember) should all have been installed.
I didn't use the net installer, and I ran the installer offline because both laptops require non-free firmware and I couldn't figure out last week how to get the installer to find that firmware (on another USB stick). So once I got to the GNOME desktop the most recent time, I copied the WiFi chip's firmware .deb onto the laptop and did a 'dpkg -i', then did the same thing to get network-manager-gnome and its dependencies installed; and once I connected to our network I started an 'apt-get install gnome' to try to get the entire desktop environment installed (that also installed the programs that show up under System | Administration).
Is there anything important I might still be missing? Is there a list of installed-by-default packages that I could compare against say a 'dpkg -l'? Does this sound like some sort of known issue?
I'm attempting to install Debian (Stable) from a business net install disc. The problem? I can't load/install the packages I need to connect to my USB 3G modem. When I load up a shell (tty2?), I'm brought to an 'ash' prompt, and there's no DPKG for me to load the necessary packages.
how I can do a total net install, including the base, from an USB 3G modem? Actually, I'm very surprised that current Linux distros don't seem to include support, for this growing market share type of internet connection.
I downloaded and installed Debian Squeeze from a CD (a 700~mb file), but I seem to be missing a lot of things; mainly any wireless internet tools! I searched through aptitude and I couldn't find any sort of package. Do all copies of Debian (I downloaded the CD-1 file from a http mirror) have network tools such as network-manager-gnome?
View 6 Replies View RelatedSo, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
my OS FC13 is missing some packages. iwant to reinstall that but my network cards are not enable so i want to do it in rescue mode. how to do that in rescue mode.i know i will reach till chroot /mnt/sysimage. after that if i install any package then if i reboot my system will those packages will be availabe in real OS.
View 9 Replies View RelatedI'm having problems with networking. I just installed Debian 6 SServer LAMP and it didn't autoconnect to internet. I plug in the internet to my eth0 (default) port, and I keep getting timeouts. I found that dhcp3-client was not installed and fixed that. My etc interfaces has this for eth0: Auto eth0 Iface eth0 inet dhcp What other packages or config do I need to make the internet work? It's missing something basic that wasn't setup properly. I do get the correct dns address to my isp provider when I check etc resolv.conf. It just can't dhcp discover.
View 1 Replies View Relatedwhen I have a broken packages on the system and want to apt-get install something (completely unrelated to the broken package) apt-get starts giving me crap about the broken stuff and won't download and install the packages I'm asking for. How can I make it ignore the completely unrelated stuff about missing deps on my system and download what I want?
View 3 Replies View RelatedWhile i'm installing few rpm packages using yum i got missing dependency error. So how can i clear that error and how install successfullly.
View 3 Replies View RelatedI hoped to use php-5.2 while keeping close the the centos packages (no external repositories).So I tried the packages from http://dev.centos.org/centos/5/testing/i386/RPMS/ .These packages seem to be compiled without mime-magic support (--without-mime-magic).The previous stable php-5.1.6 packages had this mime-magic support enabled.
View 1 Replies View RelatedOn Fedora repo I found VirtualBox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 5 Replies View RelatedI recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.
Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.
Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View RelatedI download all packages of Fedora 12 64 bit and all rpmfusion packages , all of them free and nonfree. all of them is near 20GB, I download all of them by rsync.I download them in work,In home I use Fedora12 64 bit and do not have internet connection , I copy all packages with USB flash and copy them to my Fedora box , and I want install VLC and other codecs and Nvidia driver for some games.What I must do ?I said again I do not have internet connection in home but I have all packages , free and nofree and rpmfusion packages
View 14 Replies View RelatedThe Synaptic Package Manager in Ubuntu 10.10 no longer has the option "Mark Packages by Task". In previous versions it was under the "Edit" menu.Is there a way to get it back or is it hidden in other menus?
View 4 Replies View Related