Just used synaptic to install Netbeans IDE. I see that it is version 6.01
and the latest version of Netbeans is 6.8.
How do I upgrade my installation ? As there is no option to do so in the package manager?
Netbeans 6.8 Ubuntu 10.04: I add php to netbeans and when I type $ gksu netbeans its open netbeans without php editor. Only when I type $ sudo netbeans its open it properly
View 1 Replies View RelatedInstalled netbeans via synaptic but when I click 'NetBeans' it doesn't open... no error nothing
Tried running 'netbeans' in terminal and it's the same!
I upgraded from fedora 11 to fedora 13 which upgraded Netbeans from 6.5 to 6.8. Now 6.8 complains that package javax.persistence does not exist. Is this a fedora problem or a Netbeans problem? I've looked in the netbeans forums and can't find any discussion of this.
View 3 Replies View RelatedI recently upgraded to 10.04 and now netbeans is not working. It worked fine the first restart after i upgraded so i thought all was good. This morning i ran it and it said something about not being able to load some modules. Since then, i've tried uninstalling it, re-installing it, and numerous restarts, all to no avail. I'm gonna try downloading the package from their website and running it from a separate install and see if that helps, but after that, I'm out of ideas.
When i run it either from the terminal or by clicking on it, it shows the loading screen, then the loading screen dissapears, then nothing else happens. In the terminal, it waits about ten seconds after the screen dissapears and the program seems to exit, since the terminal begins accepting commands once again.
Upgraded to 10.10 seemingly OK but the latest NetBeans 6.9 (from 6. seems
borked,
On running for the first time it asked if I wanted to import the old settings and then said it couldnt.
Trying to build a new project from existing sources for some reason goes 2 directories up and tries to include everything from there!
I recently upgraded from Ubuntu 10.04 to 10.10. All was going well until netbeans started throwing up errors about not being able to find the "stddef.h" header being called from the stdio and stdlib headers. Now I am unable to even initialize variables without failing.
I was using 6.9.1 from the netbeans website, but then I installed 6.9 from the repos alongside, and I still get the same error. Do I need to remove 6.9.1 ( I would rather remove it and keep the repo version), and if so, how do I do it?
where the stddef.h file is located so that I can replace it, or know of any work around?
I am receiving a ton of errors when loading netbeans 6.8 on my Ubuntu 10.4 machine. code...
View 3 Replies View RelatedI have started learning Java and I don't really get on with Netbeans. (I found it hard to compile and debug etc but that could because it is late here). What IDE do people use and why?
View 5 Replies View Relatedi installed Netbeans on Fedora 12 (Gnome - 64bit) and its very slow. I get same poor performance with OpenJRE and SunJRE. My pc specs are : HD3870 ATI, AMD x2 5000+ @ 3.2ghz, 3gb DDR2 800++mhz RAM.
View 7 Replies View RelatedI used Netbeans IDE 6.8, then I updated, it error. Now I want to uninstall it, before reinstall it. Now,How to uninstall?
View 3 Replies View RelatedI just downloaded Netbeans for Ubuntu. Now I only have Java, how can I add PHP to it?
View 2 Replies View RelatedI have downloaded NetBeans 6.8 to do java proramming. After downloading I want to know how to run "netbeans-6.8-ml-linux.sh" file. From command line I went to the folder where the netbeans-6.8-ml-linux.sh file is, and I type the command.
$ sudo ./netbeans-6.8-ml-linux
it says that:
sudo: ./netbeans-6.8-ml-linux: command not found
Is it possible to make the editor font in NetBeans look exactly the same as it does in Ubuntu 9.10's gnome terminal or gedit (that is, use the same font and make it antialiased)?
View 1 Replies View RelatedI'm using Ubuntu 9.04 on a netbook with the remix UI. I downloaded netbeans and orginally it would show a gray screen after the splash screen disappeared. I was able to fix that by adding "export AWT_TOOLKIT=MToolkit" to /etc/profile.
I then disabled a plugin, can't remember which one, and added a plugin to netbeans internal repository. Now netbeans won't start at all. It freezes at the splash screen. I have done a complete removal and a reinstallation, so I doubt the plugin stuff is affecting it. When I run netbeans from console it hangs, and displays not output until I send it an interrupt. Then it spits out this error message:
Quote:
** (<unknown>:5182): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:5182): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:5182): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
** (<unknown>:5182): WARNING **: FIXME: wait for completion unimplemented
** (<unknown>:5182): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
I've tried a quick google search and found nothing. I've recently had to remove openJDK due to the sheer sluggishness of the entire outfit and instead installed SunJDK. Now, I've been trying to get Netbeans to work again (had to reinstall it) but it won't load. Here are the simple steps. 1. Click on netbeans (run) 2. Netbeans shows up the taskbar 3. Netbeans disappears from the taskbar 4. user left.
View 6 Replies View Relatedwhere do I add a jar so that NetBeans picks it up and the classes are available in the IDE source editor + ubuntu 10.4 ?
View 1 Replies View Relatedi have installed the netbeans-6.5-ml-linux.sh on red hat linux 5.0 but i want to uninstall it & i dont know how to do this ???
View 2 Replies View RelatedSlackware vers: 13.1
Netbeans vers: 6.9.1
JDK version: 1.6.0_24
Code:
#
# A fatal error has been detected by the Java Runtime Environment:
#
# SIGSEGV (0xb) at pc=0xb2d772fd, pid=2766, tid=2953837424
#
# JRE version: 6.0_24-b07
[code]....
I tried reinstalling both JDK and Netbeans to no avail.
how to install netbeans in ubuntu 10.10
View 7 Replies View RelatedI want to improve the ugly fonts in netbeans 6.7.1 on Fedora 12. I tried adding this to the start options:
--laf com.sun.java.swing.plaf.gtk.GTKLookAndFeel
via the netbeans.conf
from some posted hints on the internet but it doesn't seem to help. I'm using the latest KDE4 (4.3.3-3) on Fedora 12 and openjdk
Code:
$> java -version
java version "1.6.0_0"
OpenJDK Runtime Environment (IcedTea6 1.6) (fedora-33.b16.fc12-x86_64)
OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode) .
[Code]....
I'm a Linux novice and I'm looking to update the netbeans from the 6.8 to version 7.0. What's the best way to do this, can I just do a search in Yast and delete the 6.8 before I download and run the 7.0 script? Or should I do a side by side install?
View 3 Replies View RelatedI have two version of NetBeans installed in Fedora 15. I am unable to open them for the past three days.I would like to remove the existing ones completely but they were not installed via yum. How do I remove them?I tried the following, but in Gnome 3 if I type NetBeans it still shows two icons.
View 1 Replies View RelatedI'm not sure if this is the place to post this, but I'm having trouble with NetBeans.
I'm trying to run a Java applet.
My code (provided by my Java instructor):
Code:
I get 1 of 2 errors, depending on my config:
1) If I run it with <default config>
2) If I run it with Web Start
I need NetBeans to work with applets for my Java class.
I Have probleme with Netbeans. I am Using Netbeans 6.8 and my operating system ubuntu 9.10 .I have probleme with netbeans it automatically crashing while i am working on that......,. I Downloaded Netbeans 6.8 from Netbeans website and installed. before crashing no error message is displayed.Daily I started Netbens and worked on that for some time after starting it works fine then some times it automatically crashed..
can u find solution for that
When I launch Netbeans the splash screen comes up fine, but when the loading bar gets to the "starting modules" phase the Desktop freezes up. Also sometimes nautilus causes the same kind of lockup.
I really like to know how to fix this.
edit:
it also freezes when using xmacro
I have looked at similar threads, but I still have a gap in my understanding.
I have netbeans-6.8-ml-linux.sh file and a jdk-6u18-linux-i586.bin file.
In a similar thread I found:
Quote:
chmod +x <installer_file> <- make it executable
./<installer_file> <- this should start the installer
Which file is my installer file? The .sh or the .bin ?
have installed the netbeans-6.5-ml-linux.sh on red hat linux 5.0 but i want to uninstall it & i dont know how to do this ???
View 2 Replies View RelatedAnyone knows a slackbuild for netbeans 6.8 for slackware64?
View 5 Replies View RelatedI downloaded the binaries, and changed file permission to execute. When I double click on it, it asks me if I want to run it in a terminal, it starts out by giving me a message about looking for a component, and then the terminal closes, and nothing else happens. Is Netbeans not supported under CentOS 5.3?
View 2 Replies View Related