Fedora :: Yum Is Broken - Clean Up Packages After An Upgrade ?
Jun 13, 2010
I was trying to clean up packages after an upgrade and I broke yum.
Quote:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
Please install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
Go to the yum faq at:[url]
I tried to download the RPM and install manually but I was getitng digest mismatch errors.
View 2 Replies
ADVERTISEMENT
May 16, 2010
Am trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies
View Related
Oct 12, 2010
I was updating from 10.04 to 10.10 (was updating through update manager) after some time I got following message:
Code:
An unresolvable problem occurred while calculating the upgrade:
E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. When I tried to run the command
Code:
ubuntu-bug update-manager
as above message says I got error
Code:
The problem cannot be reported:
This is not a genuine Ubuntu package
Following are the files in /etc/apts/sources.list
http://paste.ubuntu.com/511416/
Then there are some files in /etc/apt/sources.list.d
their contents are
lucid-partner.list ---->http://paste.ubuntu.com/511417/
medibuntu.list---->http://paste.ubuntu.com/511418/
ubuntu-mozilla-daily-ppa-lucid.list---->http://paste.ubuntu.com/511419/
ubuntu-wine-ppa-lucid.list------------>http://paste.ubuntu.com/511420/
lucid-partner.list.distUpgrade----------->http://paste.ubuntu.com/511421/
medibuntu.list.distUpgrade---- ------->http://paste.ubuntu.com/511422/
ubuntu-mozilla-daily-ppa-lucid.list.distUpgrade---->http://paste.ubuntu.com/511426/
ubuntu-wine-ppa-lucid.list.distUpgrade--->http://paste.ubuntu.com/511427/
lucid-partner.list.save--->http://paste.ubuntu.com/511428/
medibuntu.list.save---->http://paste.ubuntu.com/511430/
ubuntu-mozilla-daily-ppa-lucid.list.save---->http://paste.ubuntu.com/511431/
ubuntu-wine-ppa-lucid.list.save----->http://paste.ubuntu.com/511433/
What should I be checking now?
View 12 Replies
View Related
Apr 24, 2010
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
View 2 Replies
View Related
Oct 12, 2010
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies
View Related
Feb 27, 2011
I have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies
View Related
Mar 21, 2011
I keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
View 2 Replies
View Related
Dec 6, 2009
I've been running fedora 12 for a few weeks now and I was wondering how to clean up all of my unused files. I have accumulated quite a bit of software in the form of updates and downloaded packages since starting and I can only assume these are going to continue to build. I have rpmorphan and it lists all of the programs I'm not using but I'm wary of it because it lists WINE as one I haven't used but I use it everyday to play a game. I'm afraid I'll erase something I need, but I'd like to keep my system as clean and slimmed down as possible.
View 1 Replies
View Related
Jun 26, 2010
I must say I am quite embarrassed. I normally don't ask these sort of questions. I can't seem to update my system. When I call;
Code:
$ sudo yum update
I get the following error which I will like to clean up with your help;(not "work around
[code]...
View 3 Replies
View Related
Nov 2, 2010
I upgraded from F13 to F14 Final i386 off the i386 DVD this AM and just wanted to say the upgrade went very smooth and I've yet to come across any issues. I have nvidia video but I do not use nvidia 3rd party drivers so I cannot say how an upgrade with those drivers would go.
View 11 Replies
View Related
May 10, 2010
kpackagekit warned me about a distribution upgrade to FC12in order to set things in motion i have to press the upgrade button is this action completely safe?since my FC11 is working like a charm, and i consider to upgrade to FC13, depending on the fact if i can build kernel drivers for kernel 2.6.32-,, that is still in the testing repo'smy idea is to upgrade all available packages from testing when fc11 is EOL, and i will see what happends after this upgrade, if my system crashes or whats so ever, i will install FC13.
View 9 Replies
View Related
Jun 1, 2010
I did a clean install of fedora 13 on my sys, however when i run
Code:
rpm -qa |grep fc12
lots of and lots of fc12 packages pop up. below is the list. if there is fc13 version of these packages, and if there is (which I suspect for at least some of them there should be) why my sys doesn't update to those packages?
here is the list of fc12 packages:
Code:
~$ rpm -qa |grep fc12
ctan-cm-lgc-fonts-common-0.5-17.fc12.noarch
plexus-compiler-1.5.2-4.3.fc12.noarch
texlive-texmf-errata-fonts-2007-7.fc12.noarch
[code]....
View 5 Replies
View Related
Dec 18, 2010
I have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
View 2 Replies
View Related
May 8, 2010
I downloaded and installed k3b from the software center and remember seeing that after it was installed, an additional 180MB would be taken up. so the installation process took about 2-3 minutes after unpackaging or whatever it does. But when I went to uninstall it, it took like 2 seconds. Is there a way to clean up packages that hasn't been uninstalled all the way or haven't been used? Is that normal?
View 4 Replies
View Related
Oct 20, 2009
I recently upgraded my x86_64 system from FC8-FC10 using Pre-Upgrade, and here I got some help fixing all the package conflicts that resulted. Following the first reboot after this massive package update, it appears DNS doesn't work in some apps.
I could ping www.yahoo.com, and nslookup www.yahoo.com resolved the name, but firefox and links couldn't. Typing the ip addr that nslookup gives for www.yahoo.com works fine in both firefox and links. Something's obviously wrong with DNS.
I found a workaround for Firefox which is to browse to about:config and set network.dns.disableipv6 = true. Firefox started resolving names after that.
But then I noticed yum is DNS incapable as well. I don't know how to fix it. Here's what I get:
Code:
[~]$ sudo yum update
Loaded plugins: allowdowngrade, refresh-packagekit
http://linuxdownload.adobe.com/linux/i386/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
[Code]....
Does anyone have any additional info on workarounds or fixes for this DNS problem?
The machine in question has a static ip addr, and I have static nameserver addrs in /etc/resolv.conf, corresponding to the static settings provided by my isp.
View 14 Replies
View Related
Dec 15, 2010
With ubuntu it was possible to clean packages with the commands
sudo apt-get autoremove
sudo apt-get autoclean
All not necesseary packages were removed. Packages who didn't no longer has a dependency were removed.
Can this also be done under Debian?
View 12 Replies
View Related
Mar 16, 2010
I would like to ask whether somebody has had the similar experience after KDE 4.4 upgrade.
1. From the attached picture you can see that an icon for xine has a different size. When I change it manually and align the icon, it has previous status after the restart. If I delete that icon and recreate it again, it's smaller than other icons. Icon size for desktop is set up to 32, Desktop Activity.
2. Minimizing/maximizing e.g. Firefox breaks all icons in task bar. I am able to refresh only Firefox/Thunderbird icons.
What can cause these issues? Maybe:
1. my nouveau driver
2. bugs in KDE 4.4.
3. my theme
View 5 Replies
View Related
Jan 28, 2011
I recently upgraded to Fedora 14 from F13 using Yum, it worked to my amazement except now yum appears to be broken because of a massive amount of dependency issues. It appears the old F13 packages are still around and yum is unable to get ride of them because their dependency with F14 packages of the same name. I tried yum distro-sync, and I tried yum resolvedep $(package-cleanup --orphans) --skip-broken but to no avail. Package--cleanup--orphans identifies all of the left over F13 packages.
I also can't install or upgrade anything using Yum, does give me a reason except the massive amount of dependency issues with the left over F13 packages. When I use the graphical software update it tells me among other things that Yum and RPM have updates but of course it won't update. I did follow the instructions and used yum update yum before I upgraded to F14, maybe it didn't take? Anyway to resolve this issue other than a clean install?
View 5 Replies
View Related
Feb 23, 2011
I just performed a clean install of Ubuntu 10.04 on my flash drive, allocating a 6.5 GB persistence file. Of course, the first thing I did after booting from it was to run sudo apt-get update and sudo apt-get upgrade. After a lengthy install process, I was eventually notified that several packages failed to upgrade. I rebooted and tried again, still to no avail. Now, whenever I install a new package or attempt to upgrade with apt-get, I receive the following or a simmilar output:
Code:
Setting up fuse-utils (2.8.1-1.1ubuntu2.2) ...
creating fuse group...
udev active, skipping device node creation.
update-initramfs: deferring update (trigger activated)
[code].....
View 2 Replies
View Related
Aug 5, 2010
I'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies
View Related
Jun 21, 2010
I upgraded from fedora 11 to fedora 13 which upgraded Netbeans from 6.5 to 6.8. Now 6.8 complains that package javax.persistence does not exist. Is this a fedora problem or a Netbeans problem? I've looked in the netbeans forums and can't find any discussion of this.
View 3 Replies
View Related
Sep 14, 2010
I recently did upgrade from F12 to F13 using preupgrade, and I was following the guide from the Fedora project website [URL]
On the section Removing unsupported packages it shows how to find orphaned packages and sugest you remove them. I tried that, found a bunch of packages that I promptly erased. But then I
came across
ModemManager-0.4-5.git20100720.fc12.x86_64
I thought "well I don't use a Modem" so I tried to yum erase it. I stopped when I saw that it was trying
to also remove the dependencies, a bunch of NetworkManager packages.
My question is, why is ModemManager flagged as an orphan if it has packages depending on it, isn't that wrong?
And also, the recommendation on the guide to remove these packages can be dangerous to people who don't pay attention (imagine someone accidentally removing NetworkManager, no internet).
I will keep the "orphaned" package out of necessity, but something is wrong in this whole deal.
View 3 Replies
View Related
May 3, 2010
videos videos work great, but unfortunately, when i try to access videos on hulu.com, i receive this error message: "we're sorry but we're unable stream this video to your system. this may be due to an adobe software limitation on 64-bit linux systems."
this is strange because hulu videos were working after i installed lynx but mysteriously stopped working. i don't have the swfdec-mozilla package installed nor the mozilla-plugin-gnash nor the flashplugin-installer.
what do i need to do to start clean and install the necessary packages?
View 7 Replies
View Related
Jun 7, 2010
I had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although
Code:
joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)
View 10 Replies
View Related
Dec 18, 2010
I have some updates waiting to be installed, but can't install them because of: "Fix broken packages first".I searched the forum for answers but until now nothing seems to work.I used:
Code:
Fix broken packages in Synaptic
sudo apt-get check
[code]...
View 9 Replies
View Related
Dec 15, 2009
I just finished upgrading the last of 3 machines from F10 to F12 using preupgrade (all i686). Except for a non-critical hplip issue, all went well with the first two machines upgraded 1 week and 3 days ago, but some python F10->F12 updates were missing on the third machine that I upgraded yesterday, leaving yum inoperable. Thanks to good yum error messages, I was able to resolve the problem (I think), but I thought I should post to check if mine is a unique or common problem, to enquire if it may have resulted from some of the python packages being in "update transit" in the repositories, and/or whether something like this can be avoided in future? Details follow:
Upgrade appeared to go well except for some dejavu font dependency issues (experienced on all three machines) and libcrypto.so.7 missing for eet-1.2.2-4... (third machine). However, there was a boot message that some python module (can't remember which) was not present for some nvidia requirement, although video driver worked fine. When testing yum: First it complained that libpython2.6.so.1.0 was not present. Since that module conflicted (identified by rpm) with various python 2.5.*f10 packages that that were still on board, I copied libpython2.6.so.1.0 (from a current f12 rpm) into /usr/lib manually. Second, yum complained that urlgrabber was not available, so rpm with the latest python-urlgrabber for f12 solved that.
Third, yum complained that pycurl was not available, so rpm with the latest python-pycurl solved that. Yum now works! and boot message is gone! I ran "yum install python-libs" to make sure that any necessary dependencies were met following my manual installation of libpython2.6.so.1.0, which resulted in a bunch of python dependencies being upgraded as a result.
View 1 Replies
View Related
Sep 1, 2011
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies
View Related
Aug 27, 2015
seems like after a recent upgrade of stretch, i get a message (in italian)
Code: Select all
$ sudo apt-get install kde-full
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
Alcuni pacchetti non possono essere installati. Questo può voler dire
che è stata richiesta una situazione impossibile oppure, se si sta
usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
non sono ancora stati creati o sono stati rimossi da Incoming.
Le seguenti informazioni possono aiutare a risolvere la situazione:
[CODE]..
View 2 Replies
View Related
Apr 11, 2010
I have a broken package and can't seem to fix it. Now, nothing can be downloaded from synaptic. I get the following error message:
Processing triggers for software-center Setting up courier-mta (0.61.2-lubuntu3) * Starting Courier mail server. Starting Courier mail server. invoke-rc.d: initscript courier-mta, action "start" failed. dpkg: error processing courier-mta (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: courier-mta E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?
View 1 Replies
View Related
Jul 2, 2010
I'm trying to do this:
Code:
deb [URL] lucid partner
Then update:
Code:
sudo apt-get update
Then this:
Code:
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
The last code when entered says I have a broken package that needs to be fixed. The terminal tells me to enter the code below to fix the broken package but nothing changes. I still have a broken package.
Code:
sudo apt-get -f install
View 4 Replies
View Related
