I would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.
View 1 Replieswhat happens if "#chkconfig --level 345 dhcpd on a network with existing DHCP server"
View 2 Replies View RelatedFor some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
View 2 Replies View Relatedi have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View RelatedI have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
Using places>networking. Tried to drag files from windows to ubunto: works ok
Tries to drag from ubunto to windows, getting there was an error copying the file to smb://<computer name>/<folder name>/permission denied
Ubuntu 10.04, Windows Vista home premium
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies View RelatedI have to use git to fetch code from Internet through a proxy.I search some article on it, but it's not suitable for Slackware.
Like this:
Quote:
url
I cann't find "socket" command in Slackware.How to use git through a proxy in Slcakware?
On a remote system, when all you have is the ssh CLI -
How do you find out the ip addresses for:the Gateway
the DHCP server
the DNS server
Don't need to make any changes.
Which commands will display this info?
I had installed Ubuntu 10 to my desktop computer & I want to make it as DHCP server with Router, and use it for testing. I had installed dhcp server (apt-get install dhcp3-server) what should I do further? What file to edit?Also , I had 2 network cards, so I had to assign correctly the IPs & interfaces.
View 1 Replies View RelatedI'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
dhcpd.conf file:
ddns-update-style interim
ignore client-updates
ubnet 10.160.195.160 netmask 255.255.255.224
[code]...
The cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.
Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?
i have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
On my network drive web control panel I have got such an option:What would a dhcp server do on a network hard disk?
View 5 Replies View RelatedI've found a lot of pages of how to fix the issue on older releases of dhcpd and ubuntu.
#>dhcpd
#> ...
#> Can't create PID file /var/run/dhcpd.pid: Permission denied.
I have tried creating the file and giving it permissions to be accessed, but that isn't solving the issue. I tried to go through some of the older fixes, and one was really close to working but lacked the same folders as I have.
EDIT: one solution that worked was to use ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid dhcpd3 -cf /etc/dhcp3/dhcpd.conf at0
I have setup an dhcp server wich allows ICS, and a samba server as a PDC. I can access the shares from windows if I type the server Ip (ej. \192.168.0.1), however if if write the address (ej. \dbaserver) I cannot access them.If I type ping dbaserver on a command prompt, it returns 127.0.0.2 not 192.168.0.1, what could be wrong. I asume because of this I cannot join the domain also.
View 4 Replies View RelatedBasically, I wanted to use the Bootp (PXE) protocol to boot a machine (my laptop) from my network instead of using USB/DVD boot medias to reinstall if need be. My router being a piece of crap, I couldn't setup the DHCP server to allow PXE packets. Confirmed from the manufacturer that it is not possible. Well for a $140 router, you would expect the opposite. Anyways, here I am with a small machine setup with Slack, no desktop environment (only CLI) and connected to my router (which I deactivated the DHCP) so the machine can act as a DHCP server. It works very well. However, I would like to install a few other utilities into that machine and for them to work, I need to put the machine between my cable modem and my router. Basically, here's the topology from outside):
Internet (ISP) --> Modem --> DHCP machine --> Router (no DHCP - acting as a switch) --> computers & printers
The problem is that I cannot connect to the modem from the computers on the network. Also I cannot access the internet (go on the WAN side) from the computers. From the computers (namely my laptop), I can ping the router, but cannot ping the interface where DHCP broadcast. Also I cannot ping the modem. From the router (using the web config page), I can ping the DHCP broadcast. From the DHCP machine, I can ping the modem. In the DHCP server, I setup the eth0 (the interface where the modem connect to) as a DHCP assigned IP so it can obtain the IP from the modem. The eth1 (the interface where DHCP broadcast) is static. All my machines obtains a IP from the DHCP machine without a hiccup.
how to configure dhcp server in a local lan network
View 2 Replies View RelatedLooking at var/log/messages below, it looks like I'm not being offered a lease on this particular network. I can successfully connect to the network because iwconfig wlan0 reveals my network ssid and the access point I'm connected to. But pinging google.com gives me nothing..
Code:
root@darkstar:/# tail -f var/log/messages | grep dhcpcd
Mar 28 15:45:42 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:13 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:44 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
[code]...
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
How to find IP address of computers in LAN served by simple DHCPd (in ADSL modem - without IP reservations/MAC address).
So is in Ubuntu something like on-fly name resolution in Windows ? Without running DNS server with some kind of DynDNS ?
e.g.
My comp has hostname "GoGo" but I get random IP address from DHCP.
How can other PC on same LAN resolve my changing IP address ?
Does anyone know where I can find RHEL compatible rpms for Bind 9.7 and DHCPD 4.1?
View 1 Replies View RelatedFirst, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies View RelatedHow do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies View RelatedHow can I start dhcpd after Network manager has set up a new connected device. The reason being that dhcpd will not start when there is nothing connected to the network interface. Therefore I would like dhcpd to start after a new device is connected. Now I have found references if ifup-post but this does not relate to NM, is this correct?
View 5 Replies View RelatedI'm attempting to run a DHCP server on my home network to enable PXE booting for ethernet clients, but I'm having quite a few issues getting it all up and running. I'm not entirely sure what is wrong, but I keep encountering errors in syslog as follows:
Code:
Feb 27 02:26:46 servnerr-1 dhcpd: Wrote 0 leases to leases file.
Feb 27 02:26:46 servnerr-1 dhcpd:
Feb 27 02:26:46 servnerr-1 dhcpd: No subnet declaration for eth0 (192.168.1.3).
[code]....
Networking is not exactly my strong suit, but I would like to get this up and running if at all possible.
I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.
View 4 Replies View RelatedBack in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.