General :: Determine Whether Computer 'gets IP Address Information From Dhcp Server On Network'
Sep 24, 2010
First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies
ADVERTISEMENT
Dec 7, 2010
I got a machine with RedHat Enterprise Linux 5 installed. I set the ifcfg-eth0 as following:
Code:
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Ethernet
when the machine rebooted, eth0 has the ip address 192.168.24.234. But if executing 'dhclient', eth0 will get the ip address 10.200.34.208, which is my expected ip address. I'm not quite familiar with networking things. I don't know what's going on there. Why should I need to execute 'dhclient' to obtain the expected ip address? Is there any way to obtain the ip address 10.200.34.208 right after host boot?
View 3 Replies
View Related
Feb 12, 2009
I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
View 14 Replies
View Related
May 18, 2010
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
View 5 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Jun 3, 2010
I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.
View 5 Replies
View Related
Apr 9, 2010
I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference
View 2 Replies
View Related
Jun 7, 2010
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies
View Related
Aug 7, 2011
I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."
Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?
View 4 Replies
View Related
Oct 28, 2009
I am new to scripting and I have planned to create script which gives me network computer inforamtion. therefore, I want to know how to write script that sends me computer information to my email add.
View 4 Replies
View Related
Apr 18, 2011
I setup the dnsmasq in debian squeeze as dhcp and dns server, for the debian host i assigned the static ip addresses, and configured the xp for dhcp. Windows XP network can't acquire DHCP address from debian squeeze with this error:
Quote:
error unable to contact your dhcp server Request has timed out.
this is the tcpdump output in debian for the xp network:
Quote:
15:12:10.631635 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:13:16.611793 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:07:e9:a8:ea:93 (oui Unknown), length 300
15:12:42.631730 ARP, Request who-has 169.254.202.161 tell 169.254.202.161, length 4615:12:44.613568 ARP, Request who-has
[code]....
View 11 Replies
View Related
Apr 13, 2011
I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.
Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:
Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
[Code].....
View 8 Replies
View Related
Jun 14, 2011
Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black
View 2 Replies
View Related
Jun 2, 2011
how to configure dhcp server in a local lan network
View 2 Replies
View Related
Apr 27, 2011
I'm running gnome desktop on squeeze system. When I boot my system seems to be using my internet modem as its dhcp server. The rest of the machines on my lan are correctly using my router for that purpose. As a result, what happens then is that my debian machine frequently gets a duplicate ip address assigned to it. I would like to specify to my debian computer that I want it to use the specific fixed ip address of my router for dhcp purposes.
View 9 Replies
View Related
Nov 10, 2010
I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
View 8 Replies
View Related
Aug 6, 2009
I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.
Here are the outputs for this card.
uname -rmi
2.6.18-92.1.10.el5 x86_64 x86_64
lspci -m
04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)"
lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')"
04:01.0 0200: 1186:4b01 (rev 11)
lspci -vv
04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.
View 2 Replies
View Related
Jul 8, 2010
I want to set up a dhcp server such that the clients get same ip every time. Giving fixed address to every client would be a long process.
"I don't want to assign a specific ip to the client but what i want is the server provides same ip every time"
View 6 Replies
View Related
Nov 1, 2010
The cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.
Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?
View 1 Replies
View Related
Dec 26, 2009
For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
View 7 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
Dec 29, 2010
at the moment we're running an isc dhcpd with about 300 clients to serve. Because of inconsequent maintaining i think we have about over 50 dead static client entries in our dhcpd.conf. So we want to change our construct.Our aim is to allow a mac on the dhcp server to get an ip address. If this mac hasn't registered an ip address from the dhcp server for a time more than 90 days, the host entry gets disabled or deleted automatically. I'm searching for such kind of dhcp server configuration for many days. Have you any idea if there is a possibility to implement such a configuration?
View 1 Replies
View Related
Aug 13, 2010
I would like to create several aliases to eth0, but have the addresses assigned by DHCP instead of being set to static IP's. Is this even possible? All the examples I've seen assign a static IP using the command:
ifconfig eth0:0 192.168.1.11 up
View 5 Replies
View Related
Jan 7, 2010
I am sitting in front of a suse server computer and i have to install php-mysql package in this server.When i am doing that through yast it is asking for the cd of suse.I have that cd but i cannot connect the cdrom to that server.The cdrom is connected to another PC which i can also access.Is there anyway to install that package using the cdrom connected to other PC.
View 1 Replies
View Related
May 17, 2010
How do you setup Secondary or Slave Servers in NIS? Will the domain of the slave server be the same as the Master Server?
View 1 Replies
View Related
Aug 3, 2010
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies
View Related
Aug 18, 2010
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies
View Related
Apr 6, 2009
I'm just an undergrad with duck tape and google searches to hold this place together. Anyways on to my question. Where I work, we have a tape library but no way to configure it, the backup software simply talks to the robot to load and unload tapes. There is a network port on the library and I do have the software, but have been running into problems getting access. I was wondering, is there a way to determine the ip address of this machine by plugging in a cross over cable with a laptop and scanning it? What tools could I use to do this?
View 5 Replies
View Related
