Fedora :: "#chkconfig --level 345 Dhcpd On" Into A Network With Existing DHCP Server?
May 21, 2011what happens if "#chkconfig --level 345 dhcpd on a network with existing DHCP server"
View 2 Replies
ADVERTISEMENT
Fedora :: Make 13 Box DHCP Server For Network - Cann't Find Dhcpd In YUM
Nov 10, 2010I would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.
View 1 Replies View RelatedUbuntu Servers :: Changing RAID Level On An Existing Server
Mar 9, 2011We have been using Ubuntu Server at our department since several months now. It hosts a website, e-mail and nfs(only intra).
It was set-up as RAID 0 with two 1TB Hard drives but I want to change it to RAID 1 for fault tolerance. Is it possible to change existing RAID level? If yes can someone point me to the proper place?
I tried "mdadm" documentation and level set option is available but no explanation available that whether it is only while creating the array or it can change the level too.
Ubuntu Servers :: Turn Up The Level Of Logging That DHCP Server Is Writing To SYSLOG?
Feb 14, 2011turn up the level of logging that my DHCP Server is writing to SYSLOG?I can't seem to find a syslog.conf file to edit.
View 1 Replies View RelatedRed Hat / Fedora :: Dhcp Failed - Error "rpm Package Is Also Installed - Dhcpd.conf File Is Also In /etc Directory"
Feb 10, 2010i have installed dhcp server on RHEL5.after instalation when i want to restart it.it shows failed message. rpm package is also installed.(dhcp-3.0.5-13.el5) dhcpd.conf file is also in /etc directory
View 1 Replies View RelatedFedora Networking :: No IP Address From DHCP Server On Wireless Network?
Feb 12, 2009I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server
May 24, 2010I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
General :: Restart Dhcp From /etc/init.d/dhcpd Restart
Feb 27, 2010i have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
OpenSUSE Network :: "iwlist S" Output - Quality / Signal Level And Noise Level Mean?
Jul 21, 2010[code]...
you can find a cutout of an output generated by "iwlist s" command for a cell. Does anybody know what Quality, Signal level and Noise level mean? What is the definition of them? I searched for it and could not find good information on it. What do these Extra:*** fields for? What does it show in the example above? How were those values computed?
[code]...
Server :: Chkconfig: Cannot Add New Service
Mar 8, 2010I've just created a new chkready script. but on trying to add it will the following command I get an error:
Code:
$ chkconfig --add languagetool
service languagetool does not support chkconfig
PS: Just learned how to write a chkconfig script.
Networking :: Dhcp Server On Network Drive
Jan 15, 2010On my network drive web control panel I have got such an option:What would a dhcp server do on a network hard disk?
View 5 Replies View RelatedGeneral :: Dhcpd Can't Create Dhcpd.pid Ubuntu 11.04 (natty)
Jun 20, 2011I've found a lot of pages of how to fix the issue on older releases of dhcpd and ubuntu.
#>dhcpd
#> ...
#> Can't create PID file /var/run/dhcpd.pid: Permission denied.
I have tried creating the file and giving it permissions to be accessed, but that isn't solving the issue. I tried to go through some of the older fixes, and one was really close to working but lacked the same folders as I have.
EDIT: one solution that worked was to use ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid dhcpd3 -cf /etc/dhcp3/dhcpd.conf at0
OpenSUSE Network :: Samba PDC + Dhcp Server 11.2 - Unable To Use Them
Jan 14, 2010I have setup an dhcp server wich allows ICS, and a samba server as a PDC. I can access the shares from windows if I type the server Ip (ej. \192.168.0.1), however if if write the address (ej. \dbaserver) I cannot access them.If I type ping dbaserver on a command prompt, it returns 127.0.0.2 not 192.168.0.1, what could be wrong. I asume because of this I cannot join the domain also.
View 4 Replies View RelatedNetworking :: Network Server (DHCP) - No Connectivity To Modem
May 4, 2010Basically, I wanted to use the Bootp (PXE) protocol to boot a machine (my laptop) from my network instead of using USB/DVD boot medias to reinstall if need be. My router being a piece of crap, I couldn't setup the DHCP server to allow PXE packets. Confirmed from the manufacturer that it is not possible. Well for a $140 router, you would expect the opposite. Anyways, here I am with a small machine setup with Slack, no desktop environment (only CLI) and connected to my router (which I deactivated the DHCP) so the machine can act as a DHCP server. It works very well. However, I would like to install a few other utilities into that machine and for them to work, I need to put the machine between my cable modem and my router. Basically, here's the topology from outside):
Internet (ISP) --> Modem --> DHCP machine --> Router (no DHCP - acting as a switch) --> computers & printers
The problem is that I cannot connect to the modem from the computers on the network. Also I cannot access the internet (go on the WAN side) from the computers. From the computers (namely my laptop), I can ping the router, but cannot ping the interface where DHCP broadcast. Also I cannot ping the modem. From the router (using the web config page), I can ping the DHCP broadcast. From the DHCP machine, I can ping the modem. In the DHCP server, I setup the eth0 (the interface where the modem connect to) as a DHCP assigned IP so it can obtain the IP from the modem. The eth1 (the interface where DHCP broadcast) is static. All my machines obtains a IP from the DHCP machine without a hiccup.
General :: Configure Dhcp Server In A Local Lan Network?
Jun 2, 2011how to configure dhcp server in a local lan network
View 2 Replies View RelatedSlackware :: DHCP Server Is Not Offering A Lease (WEP Network)?
Mar 28, 2010Looking at var/log/messages below, it looks like I'm not being offered a lease on this particular network. I can successfully connect to the network because iwconfig wlan0 reveals my network ssid and the access point I'm connected to. But pinging google.com gives me nothing..
Code:
root@darkstar:/# tail -f var/log/messages | grep dhcpcd
Mar 28 15:45:42 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:13 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:44 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
[code]...
Server :: Creating An Initscript That Chkconfig Identifies?
Aug 31, 2010I'm on a CentOS server and for the past hours I have been trying to unsuccessfully make a script that will start a binary and keep it running if anything goes wrong with it.
This is what I have:
Code:
#!/bin/bash
# counter daemon
# chkconfig: 345 20 80
# desc: counter daemon
[Code]...
Does anyone know how I can make the script start my application?
OpenSUSE Network :: Dhcp Client Does Not Receive The Dns Server Address
May 18, 2010I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
Server :: Add Existing Unix User To Existing LDAP?
Jun 23, 2010I have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.
View 7 Replies View RelatedServer :: Chkconfig Runs Script With Different PATH Values?
Oct 7, 2010I have a question regarding the user that chkconfig runs as. My chkconfig script calls some other scripts to start up a tomcat instance. But the secondary scripts use %JAVA_HOME and for some reason the user it's running under doesn't have that defined. I can call the scripts directly as the root or as another user and it works properly. But I added an echo in the script and when chkconfig calls the script it has a much smaller $PATH and no $JAVA_HOME.
View 3 Replies View RelatedGeneral :: Determine Whether Computer 'gets IP Address Information From Dhcp Server On Network'
Sep 24, 2010First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies View RelatedUbuntu Networking :: Internet Connection Sharing In Network Manager / No DHCP Server
Oct 14, 2010How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies View RelatedNetworking :: Start DHCPD After Network Enabled?
Sep 22, 2010How can I start dhcpd after Network manager has set up a new connected device. The reason being that dhcpd will not start when there is nothing connected to the network interface. Therefore I would like dhcpd to start after a new device is connected. Now I have found references if ifup-post but this does not relate to NM, is this correct?
View 5 Replies View RelatedUbuntu Servers :: Run A DHCP Server On Home Network To Enable PXE Booting For Ethernet Clients
Feb 27, 2010I'm attempting to run a DHCP server on my home network to enable PXE booting for ethernet clients, but I'm having quite a few issues getting it all up and running. I'm not entirely sure what is wrong, but I keep encountering errors in syslog as follows:
Code:
Feb 27 02:26:46 servnerr-1 dhcpd: Wrote 0 leases to leases file.
Feb 27 02:26:46 servnerr-1 dhcpd:
Feb 27 02:26:46 servnerr-1 dhcpd: No subnet declaration for eth0 (192.168.1.3).
[code]....
Networking is not exactly my strong suit, but I would like to get this up and running if at all possible.
Fedora Networking :: Network Manager DHCP
Jul 7, 2009I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.
View 4 Replies View RelatedUbuntu Networking :: DHCP Server No Longer Responses To DHCP Requests - Can't Ping Gateway
Oct 22, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Ubuntu Networking :: DHCP Server No Longer Responds To DHCP Requests - Can't Ping Gateway
Jul 1, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address
Mar 25, 2010I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
Ubuntu Networking :: Wired Network - Can't Get The IP From Dhcp Server (TW-EA510) And Static Settings Doesn't Work
Feb 16, 2011I'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
Ubuntu Networking :: If DHCP Not Available - Fallback And Start DHCP Server?
Mar 8, 2010Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View Related