I have Fed 12, running on kernel 2.6.31.5-127.fc12.i686 I have newer kernels installed, but they will not boot into X.
The updater installed the kernel 2.6.32.21-166.fc12.i686. I can boot into runlevel 3. But if I then give the command startx, I almost get an x-window, I can see the top and bottom, ermm, wadjecallems, beams, but the screen is blank, and then the machine freezes. I can only switch off.
i'm running on fc 11 x86_64 i'm start my computer with blank no boot or bios boot at all. i also dont know its because of hardware failure or fc11
View 2 Replies View RelatedI install the fc11 from Fedora-11-i386-DVD.iso. The software update has just updated my fc11 kernel from 2.6.29.6-217.2.3.fc11.i686.PAE to 2.6.29.6-217.2.7.fc11.i686.PAE. If I boot using the new kernel, The screen resolution is not correct (everything gets bigger) and the screen goes into blank white screen suddenly after log in.
I have a geforce 8600gt card and installed its driver (for pae kernel) as suggested on this link: [URL]Everything goes well untill I update the kernel.
Using hd3200 on a lenovo edge 13.
followed this guide to install catalyst 10.12 and everything went fine and drivers got loaded.
Just updated the kernel to the latest version(2.6.35.10-74.fc14.x86_64) and after the reboot, the screen is just blank.
This started happening after I started working on the kernel image and initramfs tools configurations basically started trying to make my system work the way I wanted.I can be doing anything like playing worms or being on this forum and the screen turns black but I don't lose energy just nothing shows on the screen and my keyboard doesn't respond the num lock doesn't turn either state,
View 5 Replies View RelatedUpgraded online from 10.04 to 10.10 this morning....went OK I think! Was offered option to upgrade further to 11.04...and went for it!! Returned later to a blank screen.....unable to wake the machine....no disk activity Now have some function via a live CD......any thoughts on how I can proceed from here? I would like to persevere with the 'upgrade' route, as a fresh install will result in much loss of files
View 5 Replies View RelatedWell, to start off my graphics card didn't work but I got that fixed.
When I start up and the login screen appears it no longer says my username and Other.. under it. It only displays Other.. I have to click that type in my username and then my password. When I log on the Auto Bug Reporting tool pops up and says 3 things crashed
I can't change my system time, shutdown or reboot under system or my username in the top right hand corner. I have to su and manually type reboot or shutdown to shutdown. It is like the computer is completely restricting me from using it.
When I try to get into my firewall an error comes up
I cannot mount anything:
After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.
View 3 Replies View RelatedI had a debian installation with kernel 2.6.32 I had a set of instructions to apply a patch to kernel which I followed to the T. The grub now shows the Debian installation with the old kernel and the Debian installation with the patched kernel.
The trouble is the system goes blank after attempting to start gdm3.
I have tried running in recovery mode and then typing startx but it only shows a blank screen.
Code: lspci | grep -i display
00:02.1 Display controller : Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) If i boot with the old kernel, everything works fine. Is this an "X" window configuration issue. I tried X -configure but still nothing changed.
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
View 14 Replies View Relatedso, I compiled the 2.6.35.7 kernel yesterday and used the config from 2.6.35.6 doing make oldconfig,etc
its the vanilla kernel with BFS, BFQ[*], Tuxonice, aufs2, & squashfs-lzma patches after compiling and rebooting I have noticed that the mouse freezes whenever the pc cpu is running high cpu % this didnt happen before with any other kernel and as I said, I used the 2.6.35.6 config Has anyone else had issues with 2.6.35.7 kernel? hardware is amd athlon64 3300+ 2.4ghz 1GB RAM, on 32bit Slackware -current I am going to compile the vanilla kernel now and see what happens.
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies View RelatedA while ago, I was applying the new kernel updates (I guess 2.6.32-24, or the one after it.. well, the latest generic update) and accidentally powered off my laptop. And now it wont come up. It comes to the logon page, and neither the keyboard, nor the mouse work. Cant even switch to the TTYs. When I boot with the recovery mode, I just see a black screen (probably the TTYs dont work) but after "processing" some time, nothing happens. Not sure if the keyboard works, as I cannot turn on/off the capslock switch, but ctrl+alt+del works
View 3 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
Screen is blanking out after x minutes. Don't know how to set it to not do that.
View 14 Replies View RelatedI have been having an issue with my screen blanking out after a few minutes (number of minutes unknown), since I reinstalled Fedora 12 (KDE) a couple of weeks ago. I have tried, yes, a lot of things to try to set it so that it doesn't blank out, to no avail. I have spent a lot of time on the Fedora forum seeking resolution, with a variety of suggestions, all to no avail. I went into System Settings > Power Control, and fooled with things around there and they didn't work. I tried xset and dpms and shutting them off. Still no cigar.
View 9 Replies View Relatedrecently i tried to install for the first time and everything booted up fine but when i got to the post install configuration my mouse and keyboard don't work! after that one time whenever i try to load linux it just sits at the boot screen where the colored bar goes left to right and has fedora text in the bottom right corner. i don't know if this matters or not but i'm dual booting with windows XP also i tried using a live cd of fedora 11 it always boots up to the login however just like above i can't use my mouse or keyboard for that one either.
View 8 Replies View RelatedI was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies View Relatedi had a serious problemafter i checked my hardware detected by using liveCD, there's no problem i thoughti successfully installed it on my PCbuti got blank/no screen appeared when it started up
View 1 Replies View RelatedIm trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
My F11 system display goes blank after some time of inactivity and I cannot see how to disable it. It does not appear to t eht screen savers (all turned off). I have an NVIDIA card,, is it in the card?
View 8 Replies View RelatedWhenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
i installed fedora 12 on my pc and I also installed the ati drivers from atiand i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 5 Replies View RelatedAfter installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
View 1 Replies View RelatedI tried to upgrade Fedora 13 to Fedora 14 using preupgrade. The upgrade seem to go OK, I didn't see any errors. But when it did the final reboot all I get is a blank screen. I rebooted in single user mode and saw that /etc/rc5.d/S99local -> ../rc.local is the last script executed. I edited rc.local and added 'echo "got here"' at the end and rebooted. It did print "got here" so I know all scripts were executed for init 5, it didn't get hung anywhere along the bootup. Why I'm not getting the login screen?
View 1 Replies View RelatedI have windows 7 on my laptop (Dell Studio model). I have installed fedora 12 onto my machine in the unallocated space, the installation went smoothly. If I login to the fedora directly then every thing works fine. but if I login to Window 7 and again try to re-login into fedora 12 after shutting down the winows 7 then the booting screen will become black (almost invisible) even though I can be able to login and can go to the desktop (which is also very least visible) if i click on suspend and then click on the power button then the screen will become properly visible.
View 2 Replies View RelatedI have installed Fedora 8 before 5 months. I normally use Eclipse, java, firefox, tomcat. Nowadays when I am working in any of the said applications suddenly my desktop goes off like a blank screen as if my monitor switched off. After 30 secs or sometime the user login page comes. I need to restart all my work again. I use gnome.
View 1 Replies View RelatedI have had some problems with Evolution. It sometimes freezes on start-up: I have to force it to quit. If I open "System Monitor", and end the evolution-alarm-notify task, then I can restart evolution successfully. I therefore suspect it is that which is causing trouble. What is it and how do I stop it?
View 9 Replies View RelatedWhen i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....