Fedora :: Install Geforce Driver In 14?
Mar 18, 2011how to install the geforce driver in fedora 14?
View 1 Replies
ADVERTISEMENT
Fedora Hardware :: Install Driver For Geforce 9500gt?
Dec 6, 2010Hey I just bought a video card Nvidia geforce 9500 gt and I was trying to install drivers, I blacklisted nouveau and then rebooted system but now I cant access Fedora... I tried to rescue the system with my DVD following steps from :[URL] I got no errors in the grub install but I am still cant access my system, it try to but it will show the Fedora logo forever...
View 4 Replies View RelatedFedora :: Nvidia (GeForce Go 7900 GTX) Driver Install Ok But No GLX Visual
Feb 11, 2010I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
Fedora Hardware :: Can't Install NVidia GeForce FX5900 Driver
Jan 15, 2011I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.
Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011
[code]....
I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?
OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found
Jan 11, 2011After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
Debian Hardware :: Install NVidia GeForce Driver For GT220?
Oct 25, 2010install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
View 10 Replies View RelatedOpenSUSE Install :: Installing NVidia Driver For Geforce GTX 275 Fails
Aug 20, 2009I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies View RelatedFedora :: F13 Driver Support For Geforce 5 - FX - Series
May 25, 2010Will there be support for Geforce FX series graphics cards in F13 (kmod-nvidia-173xx)? Currently it's not available.
View 5 Replies View RelatedFedora Hardware :: Cannot Active Driver Geforce 9500GT In 12
Feb 9, 2010I try to install the driver from my geforce 9500gt in the fedora 12, but i can't acess the display setting and don't activate 3D acceleration. This is what show to me in the display settings. i already have make some modifications like say here:
[URL]
And i don't know how to restore grub.conf, or uninstall NVIDIA driver...
Fedora :: After Installing The VGA Driver For GeForce Fx 5500 14 Is Not Booting?
Jan 22, 2011After I installed the driver for my AGP GeForce Fx 5500, the system is not booting. I followed some instructions on a website and I disabled "nouveau" in the grub.conf file and then I installed the driver for the VGA. I need to mention that I updated my system to the latest software updates. Anyway, after I installed the driver (which it seems it was wrong for my VGA), the system currently arrive to a step in booting which it's : Starting apt [ok]. After that the system is hanging and not able to enter the desktop.
View 14 Replies View RelatedUbuntu Multimedia :: NVIDIA GeForce FX 5500 Driver Install Failed On Maverick
Oct 13, 2010tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies View RelatedSoftware :: Install GeForce 8600 XT Driver In Novell Open Enterprise SUSE 11?
Feb 9, 2011I'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,
UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?
Fedora Installation :: Upgrade Geforce Fx5700 Graphic Driver
Feb 8, 2010i tried to upgrade my geforce fx5700 driver. After upgrading i cant login. Before the login screen appears there is a black screen and when i type it writes first "^[[4~" and then i can write and nothing happens. I have two options in the bootloader : Fedora (2.6.31.12-174.2.3.fc12x86_64) and Fedora (2.6.31.5-127.fc12x86_64). I am afraid to kill the second konfig.
View 14 Replies View RelatedHardware :: Unable To Use NVidia Driver For GeForce 9200 In Fedora 13
Sep 29, 2010In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
Fedora :: Hardware - GeForce 4 MX440 Vs GeForce FX5200
Aug 28, 2010Today I received as a gift a 5 years old Gateway 500X CPU which is apparently dead due to a faulty motherboard (I still have to troubleshoot it, of course).
Even in the cause I can fix it, odds are I'll prefer to make the aforementioned CPU a donor for my other machines, instead of resurrecting an old Pentium 4 (no HT) system.
Being this the case I checked the parts for possible transplants:
512MB DDR PC2700 memory module (useful right off the shelf for my main desktop system).
120GB Maxtor IDE hard drive (also useful, assuming it is in working order).
128MB AGP8X NVIDIA GeForce4 MX440 graphics card.
On this last part (the graphics card) I have my doubts as of where to use it. My main desktop system already has an NVIDIA card: FX5200, 128MB, which is newer. The thing is that I've been doing some homework comparing both the MX440 and the FX5200 and get mixed opinions: for one thing the FX5200 is the latest of the two with some advantages like support for a later DirectX (which for Linux is pointless) and other things, but the FX5200 is also reported to be technically inferior to the MX440.
In your opinion/experience which card is a better performer? Should I expect a performance gain if I were to replace the FX5200 with the MX440?
Fedora Installation :: Install Geforce Fx5500 In F12?
Apr 24, 2010how to install geforce fx5500 in fedora 12
View 1 Replies View RelatedOpenSUSE Hardware :: Driver For GeForce GFX 550 T On A 64-bit 11.4?
Apr 29, 2011It seems to me that the default driver in the Nvidia repository does not support my card (GeForce GFX 550 ti). Does anyone have any recommendation on how to proceed?
openSUSE 11.4 64-bit (Gnome)
Intel Core i7-2600 3.8GHz Turbo2.0, Quad Core, 8MB cache, 8xHT, 5GT/s BUS
GIGABYTE PH67A-UD3-B3 Sandy Bridge 2xPCI-E2.0
8GB DUAL DDR3 1333MHz Mushkin
Fedora :: Can't Install The Drivers For Nvidia Geforce Gt 240m
Jun 16, 2010I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies View RelatedFedora Installation :: Install From Live CD With Nvidia Geforce 7150M?
Mar 17, 2009Fedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?
View 2 Replies View RelatedOpenSUSE Hardware :: Find Nvidia Driver GEFORCE G102M
Jun 22, 2010find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies View RelatedUbuntu Multimedia :: Finding A Driver For Nvidia's GeForce GT 440 1GB Card?
Mar 11, 2011anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
View 5 Replies View RelatedUbuntu :: New Driver Needed For NVidia GeForce Card To Run Unity?
May 8, 2011My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
View 1 Replies View RelatedUbuntu Multimedia :: Unable To Use Nvidia GeForce 8200 Driver On 11.04?
May 28, 2011I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
CentOS 5 Hardware :: Nvidia Geforce GTS250 Driver Installation?
Oct 6, 2010the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?
#note1
CentOS version: 5.5
#note 2:
in the following "uname -a" output:
Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux
#note 3:
in the following "/var/log/nvidia-installer.log" content:
[Code]...
Hardware :: Slowdown With Nvidia's Legacy Driver 173.14.27. Geforce FX 5900 Ultra
Oct 9, 2010I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
Fedora Hardware :: Install F13 64 Bit Get No X Windows But Do Get Text - Video Is NVidia Geforce GT 8 360M With 1gb Vram
Aug 11, 2010When trying to install Fedora 13 64 bit, I get no X windows but do get text.Video is nVidia Geforce GT 8 360M with 1gb vram. the Live DVD I get a checker board display.
View 7 Replies View RelatedUbuntu :: Find Video Driver For Nvidia Geforce 320M Graphics Card?
Apr 15, 2010How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedSoftware :: Nstalling The Driver Of Nvidia GEForce 9800 GT On RHEL5.5 The Monitor Goes Out Of Range?
Nov 2, 2010After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?
View 5 Replies View RelatedCentOS 5 Hardware :: NVIDIA Geforce 8600M GS Driver - Graphic Output Is Not Good?
Oct 6, 2009My graphic output is not that nice. How do I find out what kind of driver Centos is using? Can I fine-tune its performance? I tried to install the driver(NVIDIA-Linux-x86-185.18.36-pkg1) from NVIDIA website but it failed. I got the following log file.
---
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue Oct 6 15:33:24 2009
installer version: 1.0.7[code]....
ERROR: You appear to be running an X server; please exit X before installing.For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at[url]...
OpenSUSE Hardware :: Nvidia Geforce 8600m GT - Few Coloured Shapes In The Background (Video Driver Not Loaded)
Mar 31, 2010I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies View Related