Fedora :: Include A Profile Pic Within The GUI Login Prompt For 11?
Nov 8, 2009
Is there a way to include a profile pic within the GUI login prompt for Fedora 11?
I have the profile pic set in the "About Me" configuration page, and this will show up in my toolbar in the upper right hand corner, but when I log out and go to select my login name from the list of users within the login prompt, I don't see my pic, just the generic user picture.
Is there a way to set this? I have multiple users using this machine. It would be nice if they can just visually scan for their picture to login with.
View 8 Replies
ADVERTISEMENT
Jan 27, 2010
I just installed Fedora 12 on a laptop. I changed the default shell on the root account to /bin/tcsh and changed the runlevel to 3 and then rebooted. Now I can't login into the root account: it returns me immediately to the login prompt and I can't see any error message (the screen is cleared).Why is this happening?Can I boot into some sort of safe mode so I can undo my changes to the /etc/inittab and /etc/passwd file?I tried booting with a Live CD with the intention of mounting the filesystem and making the changes, but the new filesystem is a LVM and it won't let me mount it (or I don't know how to mount a Logical Volume).
View 3 Replies
View Related
Dec 25, 2010
I have a new install of F14.
I installed java and now I was to set some environment variables.
So I created a file called java.sh and placed it in /etc/profile.d
I gave the file 755 permissions and made it executable.
When I logged out, to get the changes to take, and try to log back in I cannot.
I enter my user name and password in the greeter, the screen goes black for a moment, and then the greeter comes back. Same if I try to log in as any user, including root. I'm in this endless loop of entering user/pass and then the screen going away for a second and then getting prompted for user/pass all over again.
View 4 Replies
View Related
Jul 28, 2010
How do I share default profile file by NIS so that I do not have to setup profile in every NIS clients?
View 3 Replies
View Related
Jun 19, 2010
I made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
View 4 Replies
View Related
Dec 5, 2009
how to remove the login prompt during the idle time. or just prolong it for about hours and hours so that this prompt wont appear each time i'm away. i still monitor the computer just 4 meters away and i have to get up becasue of this prompt.
View 2 Replies
View Related
Jul 12, 2010
My FC12 laptop won't boot. During the attempted boot, after blue/white progress bars finish displaying on the bottom of screen, nothing more seems to happen. The screen isn't totally blank in that I seem to have a text cursor and keyboard input is displayed. But, no prompt, no login prompt, X isn't running, etc. If I hit ESCduring boot, it displays the boot messages and the boot sequence stops after "Starting atd". I'm not sure if it's related, but I had previously experimented with creating a new xorg.conf file by running "Xorg -configure' and was testing the new file with "X -?? /etc/x11/xorg.conf.new" (I forget what the -?? option was). I assumed that this would not overwrite the /etc/x11/xorg.conf file and that if I ran into problems, that the original xorg.conf would be in place. how I can get this miserable thing to boot?
View 4 Replies
View Related
Aug 10, 2010
The mingetty --noclear parameter is failing with my current Fedora 13 installation. In the past this parameter would inhibit the clearing of the screen before prompting for the login name on the console. At present even with the parameter it clears the screen.
My /etc/inittab (which always worked past versions) contains:
Code:
Can someone tell me if I might be doing something wrong, or was this parameter dropped in the current version? Does anyone know of a workaround?
I understand the security purpose of the clear screen. But the particular computer is in a secured location. I prefer to look at the content of the previous screen for debugging and other chores.
View 4 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Feb 8, 2010
Something has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies
View Related
Apr 9, 2010
We are doing our project on face recognition. We are done with our project.We want to use this as a method to login into the system by detecting the face at login screen.
How to go about it?
View 4 Replies
View Related
Aug 17, 2011
Changed environmental variable PATH in Ubuntu after installing Android SDK. Now I am unable to login! Think I changed the wrong thing.
Can I undo my change?
View 3 Replies
View Related
Apr 14, 2016
I have Debian 8.4.0 with lightdm. I'm trying to load some command lines at session startup, putting these in ~/.profile but the file is not loaded. The same procedure works well if I switch lightdm to gdm3.
Anyway, there is some idea to load some script lines at the session startup? The file .bash_profile neither works. I don't want to use ~/.bashrc because it would load every time I open a terminal. Neither to use init.d because it would load for all users.
View 4 Replies
View Related
Aug 8, 2010
I have a network set up that has been working for around a year with no problems but has now developed a login problem. The system was set up with a main server with all users on it and another PC located elsewhere that people could log onto using there personal login and password that then gained access to the account on the main server. This remote PC has now got the problem. When you try to log onto an account it comes up with the message "your session has lasted less than 10 seconds. If you have not logged out yourself this could mean there is a installation problem or that you are out of disk space."
Error message says that no profile for the user can be found and it couldnt create per-user gnome configuration directory. I can log on as root onto the remote PC as it is obviously a local account but all the account on the main server are not accessible. From the root account I can see that the connection to the server is OK and I can actually log into the accounts on the server using the failsafe session so the physical network is OK.
I never built or designed this set up and to be honest I normally work with windows so its all a bit strange to me. Both PC's run Centos 5. I have checked the messages log and there doesnt seem to be any indication of a problem. Just that it stopped connecting from the remote PC. The accounts are all active on the main server itself and have no problems being accessed.
View 3 Replies
View Related
Nov 20, 2009
Last night I started my computer and loaded my CentOS 5.2 partition (Windows 7 on the other partition). I was able to login to my account, but was given a gnome error that the panel buttons (i.e. weather, cpu monitor etc) could not be loaded. I then went to restart the computer (probably not the smartest thing to do) and was given some file errors upon shutdown that were related to /dev/VolGroup00/LogVol00. After restart I was taken to a shell and ran fsck manually. It seemed to find a lot of bad blocks, so I repaired the /dev/VolGroup00 system and restarted. At this point CentOS seemed to boot normally, but upon loading of the login screen I get the error: Configuration not correct The configuration file contains an invalid command line for the login dialog, so running the default command. Please fix your configuration.
I cannot even log in as root. I get the error /usr/bin/gnome-session: error while loading shared libraries: libgnome-desktop-2.so.2: cannot open shared objects file: no such file or directory. I then went to a shell and ran: sudo yum install libgnome-desktop-2.so.2, but the package was already installed and up to date, so there was nothing to do. I am therefore stuck at this login screen with pull-down menus and tabs where I can change the configuration, add/remove users etc. So, my question is this: How do I restore my user profile so I can login....and if anyone has some insight, what caused this to happen in the first place? I should also mention, this all happened after plugging the computer into a new internet connection. No clue if that's even relevant.
View 11 Replies
View Related
Jul 5, 2010
I am new to linux but will try and be as precise as I can. I have a Dell Insp. 1545 with 3GB ram with 10.04_64
Problem: Rather out of the blue upon login, from the time of entering password to the desktop, is MUCH slower. I have no splash enabled and there is some reference to AppArmour profiles (it sits there at this apparmour reference , then sits trying to load desktop). However, I have never configured apparmor. Finally, on last login, there was some sort of screen corruption prior to getting to desktop.
Prior to all this i noticed that firefox "blinked" when I was using it, and then said that it needed to shutdown/restart for updates. I did notice at that time two of my previous tabs sortof acted oddly (moved around then disappeared).
I have no SSH/Server software etc activated.
I did change visudo so that sudo timeout shorter than it was. However that is the only modification to the system recently.
View 1 Replies
View Related
Mar 26, 2010
create a profile settings and network drive can be mapped automatically when user login to the (like Domain and active user profile on windows environment) Ubuntu systems?
View 1 Replies
View Related
Jul 11, 2010
What is the difference between /usr/local/include and /usr/include? When I compile my program, is both /usr/local/include and /usr/include avaliable? Can I copy a file from /usr/local/include to /usr/include?
View 1 Replies
View Related
Jul 8, 2010
I just downloaded the SDL source code. i did compile and make of this code.then i did make install. but i didnt see the files of SDL.h and lib.SDL.*** in /usr/include/ but later i found out that these files are placed in /usr/local/include and /usr/local/lib. how can i specifically install libraries on /usr/include and /usr/lib
View 2 Replies
View Related
Dec 21, 2010
I've already gotten into the .mozilla folder and found the profiles.ini file. My windows XP system has it's Documents and Settings folder on a seperate drive (D:Documents and settings) And I've located the profile (application datamozillafirefoxprofiles) Now all I need to do is put the path into the profiles.ini file in the .mozilla folder in Ubuntu. The problem is I don't know exactly how to format it.
In windows the path is:
How would I translate this into something ubuntu "follows?" I already have the profile name changed as well.
View 1 Replies
View Related
Jan 26, 2010
After a recent kernel update, I no longer get a login prompt on the first tty after booting. I can get to one in the second tty, and on the first one after hitting Ctrl+Alt+F1 to go back.
View 4 Replies
View Related
Jun 25, 2010
I don't get a UI login prompt at startup and it makes a sound. I'm using 10.04, though this did happen to me in 9.0x as well. When I press ctrl-alt-F1, I login and sudo gdm stop and do sudo startx this seems to put me at root and there is an error with the applets and the panel does not load. "Killall gnome-panel" does not fix it.
If I simply do startx (w/o going to root), it goes to a black screen and if I press ctrl-alt-F1 it repeats "No protocol specified" until I get the error message xinit: Resource file temporary unavailable (errno 11): unable to connect to Xserver.
View 1 Replies
View Related
Dec 19, 2010
I managed to change the background by copying over a new image file to some directory. However, there is still the big boring login window. Is there any way to change that? I'd like something darker, and smaller. I copied over the image file to /usr/share/backgrounds/warty-final-ubuntu.png My image file was actually a jpeg file, but copying it over to /usr/share/backgrounds/warty-final-ubuntu.png posed no problems.
View 9 Replies
View Related
Apr 30, 2011
I am not getting the new login prompt that allows you to select classic. I still get the same login prompt i had on 10.10. How do i correct that?
View 1 Replies
View Related
Jul 6, 2011
This might be simple but i am unable to find an answer anyplace online. How do you change the terminal login prompt on a Ubuntu server?Right now when you go to log into the server it displays:<old_servername> login:
I would like it to just display login without the server name or the new server name. I am not sure how that info go in the login prompt to begin.
View 8 Replies
View Related
May 30, 2011
I dont have login prompt after loading OS , i only see mouse cursor, now i cant use my laptop.(i have the same problem in safe mode),
View 5 Replies
View Related
Nov 19, 2010
We've set up a Red Hat Enterprise Linux 5 server and can log into it remotely just fine (with root and other users), but if I try to log in locally with a keyboard and monitor connected to the machine, I keep being returned to the login prompt. If a login is incorrect, I get an error message, but if it is correct then the screen just blanks and shows the login prompt again.While booting the only error message that comes up has to do with SNMPD, so I don't think it's related.
I read this post on the forum which seemed like a similar problem but it didn't help (I wasn't getting the "Module is unknown" message he was). I also read another post somewhere that said he was having the problem because the server was trying to use AD to authenticate, but I checked that and it's not the case with our server.From what I'm told (I didn't set up the server myself) it used to work fine, but then "something" happened one day that made it do this.
View 4 Replies
View Related
Apr 28, 2009
i have a brand new CentOS 5.2 installation and cannot login because it does not react to any keyboard inputs.By the way ... the cursor is still blinking - so the machine is running.
View 14 Replies
View Related
Sep 29, 2015
Tried to install nvidia driver and package, nvidia-glx, nvidia-kernel-dkms and nvidia-settings installed.
When trying to install nvidia-xconfig i have: error, not found.
Now I have only login prompt, no GUI, have tried to search, but have no clue.
View 10 Replies
View Related
Oct 30, 2010
Status: openSUSE 11.3; Fujitsu Tablet ST4110.I've managed to install successfully openSUSE 11.3 on my old Fujitsu Tablet 11.3. nomodeset needs to be used at GRUB boot. Now, at the login, when I click Others, and prompted to type a username, when I clicked on the virtual keyboard at the bottom right corner of my screen, the I-beam icon looses focus from the entry box, and each character pressed on the virtual keyboard does not appear on the entry box. When I try to click on the entry box, focus cannot be returned to the entry (ie. the I-beam icon does not flash at the entry box).
View 7 Replies
View Related
