Fedora Installation :: Cannot Login After Placing Java.sh In Etc/profile.d
Dec 25, 2010
I have a new install of F14.
I installed java and now I was to set some environment variables.
So I created a file called java.sh and placed it in /etc/profile.d
I gave the file 755 permissions and made it executable.
When I logged out, to get the changes to take, and try to log back in I cannot.
I enter my user name and password in the greeter, the screen goes black for a moment, and then the greeter comes back. Same if I try to log in as any user, including root. I'm in this endless loop of entering user/pass and then the screen going away for a second and then getting prompted for user/pass all over again.
View 4 Replies
ADVERTISEMENT
Nov 8, 2009
Is there a way to include a profile pic within the GUI login prompt for Fedora 11?
I have the profile pic set in the "About Me" configuration page, and this will show up in my toolbar in the upper right hand corner, but when I log out and go to select my login name from the list of users within the login prompt, I don't see my pic, just the generic user picture.
Is there a way to set this? I have multiple users using this machine. It would be nice if they can just visually scan for their picture to login with.
View 8 Replies
View Related
Jul 28, 2010
How do I share default profile file by NIS so that I do not have to setup profile in every NIS clients?
View 3 Replies
View Related
Aug 17, 2011
Changed environmental variable PATH in Ubuntu after installing Android SDK. Now I am unable to login! Think I changed the wrong thing.
Can I undo my change?
View 3 Replies
View Related
Apr 14, 2016
I have Debian 8.4.0 with lightdm. I'm trying to load some command lines at session startup, putting these in ~/.profile but the file is not loaded. The same procedure works well if I switch lightdm to gdm3.
Anyway, there is some idea to load some script lines at the session startup? The file .bash_profile neither works. I don't want to use ~/.bashrc because it would load every time I open a terminal. Neither to use init.d because it would load for all users.
View 4 Replies
View Related
Aug 8, 2010
I have a network set up that has been working for around a year with no problems but has now developed a login problem. The system was set up with a main server with all users on it and another PC located elsewhere that people could log onto using there personal login and password that then gained access to the account on the main server. This remote PC has now got the problem. When you try to log onto an account it comes up with the message "your session has lasted less than 10 seconds. If you have not logged out yourself this could mean there is a installation problem or that you are out of disk space."
Error message says that no profile for the user can be found and it couldnt create per-user gnome configuration directory. I can log on as root onto the remote PC as it is obviously a local account but all the account on the main server are not accessible. From the root account I can see that the connection to the server is OK and I can actually log into the accounts on the server using the failsafe session so the physical network is OK.
I never built or designed this set up and to be honest I normally work with windows so its all a bit strange to me. Both PC's run Centos 5. I have checked the messages log and there doesnt seem to be any indication of a problem. Just that it stopped connecting from the remote PC. The accounts are all active on the main server itself and have no problems being accessed.
View 3 Replies
View Related
Nov 20, 2009
Last night I started my computer and loaded my CentOS 5.2 partition (Windows 7 on the other partition). I was able to login to my account, but was given a gnome error that the panel buttons (i.e. weather, cpu monitor etc) could not be loaded. I then went to restart the computer (probably not the smartest thing to do) and was given some file errors upon shutdown that were related to /dev/VolGroup00/LogVol00. After restart I was taken to a shell and ran fsck manually. It seemed to find a lot of bad blocks, so I repaired the /dev/VolGroup00 system and restarted. At this point CentOS seemed to boot normally, but upon loading of the login screen I get the error: Configuration not correct The configuration file contains an invalid command line for the login dialog, so running the default command. Please fix your configuration.
I cannot even log in as root. I get the error /usr/bin/gnome-session: error while loading shared libraries: libgnome-desktop-2.so.2: cannot open shared objects file: no such file or directory. I then went to a shell and ran: sudo yum install libgnome-desktop-2.so.2, but the package was already installed and up to date, so there was nothing to do. I am therefore stuck at this login screen with pull-down menus and tabs where I can change the configuration, add/remove users etc. So, my question is this: How do I restore my user profile so I can login....and if anyone has some insight, what caused this to happen in the first place? I should also mention, this all happened after plugging the computer into a new internet connection. No clue if that's even relevant.
View 11 Replies
View Related
Jul 5, 2010
I am new to linux but will try and be as precise as I can. I have a Dell Insp. 1545 with 3GB ram with 10.04_64
Problem: Rather out of the blue upon login, from the time of entering password to the desktop, is MUCH slower. I have no splash enabled and there is some reference to AppArmour profiles (it sits there at this apparmour reference , then sits trying to load desktop). However, I have never configured apparmor. Finally, on last login, there was some sort of screen corruption prior to getting to desktop.
Prior to all this i noticed that firefox "blinked" when I was using it, and then said that it needed to shutdown/restart for updates. I did notice at that time two of my previous tabs sortof acted oddly (moved around then disappeared).
I have no SSH/Server software etc activated.
I did change visudo so that sudo timeout shorter than it was. However that is the only modification to the system recently.
View 1 Replies
View Related
Mar 26, 2010
create a profile settings and network drive can be mapped automatically when user login to the (like Domain and active user profile on windows environment) Ubuntu systems?
View 1 Replies
View Related
Dec 21, 2010
I've already gotten into the .mozilla folder and found the profiles.ini file. My windows XP system has it's Documents and Settings folder on a seperate drive (D:Documents and settings) And I've located the profile (application datamozillafirefoxprofiles) Now all I need to do is put the path into the profiles.ini file in the .mozilla folder in Ubuntu. The problem is I don't know exactly how to format it.
In windows the path is:
How would I translate this into something ubuntu "follows?" I already have the profile name changed as well.
View 1 Replies
View Related
Oct 1, 2009
I was coding some java. I had just finished setting everything up & everything was working fine so I kind of freaked out when I typed `javac hw.java`, and I received a weird error. I can't remember it exactly but from that point, I was not able to use any java-related command anymore. `javac`, `jar`, `java`.... I kept getting the same error. Something like "java runtine environement error", but it may not be that exactly. It kept creating .log files in my /home/maden/ folder, but as my topic title says, I can't reach the boot screen anymore ! I have no idea if the two problems are related but I think they are. When I got home, I restarted my ASUS eeepc 1005h and reached the KDE login screen anymore! I turn on my computer, it goes to the GRUB loader, I select fedora core 11... I then see the fedora fedora logo slowling filling up, as usual, and when the login screen is supposed to pop up, it does not. It just remains black. So now, I can't do ANYTHING, can't even login as failsafe or nothing, my data seems unreachable!
View 13 Replies
View Related
Feb 18, 2011
This is my first post and I'm pretty new on Debian. I had used Ubunu for a while now and I've decided to move on Debian Squeeze.But I've one problem: I've a Java programm to install and the installer is GUI Java based. When I run the script, I've the next message:
Preparing to install. Extracting the JRE from the installer archive.Unpacking the JRE.Extracting the installation resources from the installer archive.Configuring the installer for this system's environment.Launching installer Graphical installers are not supported by the VM. The console mode will be used instead. Preparing CONSOLE Mode Installation. But this program is not able to run the installation in console mode.
I've tried to install sun-java6-jre but without success.Has anyone an idea to help me install this programm? My Configuration: Debian Squeeze 6.0 amd64.
View 13 Replies
View Related
Jun 3, 2011
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
View 1 Replies
View Related
Dec 11, 2009
I am using the sudo command to log on locally as another user by the following command:
sudo -u theotheruser -s
or
sudo -u theotheruser sh
As I see it, this initiates a new shell with the mentioned other user.However, this doesn't load that users profile from his home directory.Is there a way to automatically read the users profile when login in with selected command? I am mostely interested in getting a working prompt when logged in.
View 11 Replies
View Related
Feb 27, 2009
im trying to get java to download.
View 14 Replies
View Related
Sep 22, 2009
How do I get java plugin to work in firefox 3.5.3 (default install of fc11 x86)64)? I removed the iced tea java completely. I installed the sun java rpm, but I cannot figure out where to link the plugin to. The firefox directory (listing below) has no plugins directory.
ls /usr/lib64/firefox-3.5.3/
application.ini chrome extensions LICENSE README.txt updater.ini
blocklist.xml components firefox modules run-mozilla.sh
browserconfig.properties defaults icons old-homepage-default.properties searchplugins
[root@dt-dan tmp]# find /usr/lib64/firefox-3.5.3 -name plugins
View 6 Replies
View Related
Sep 21, 2009
I 'am trying to install Java on fedora but I 'am stuck a this line on this tutorial [URL]. Use spacebar to read the agreement. At the end type yes to proceed with the installation. To make Firefox use the installed plugin type:
su -c 'yum remove java-*-openjdk-plugin'
su -c 'ln -s /opt/jre1.6.0_14/plugin/i386/ns7/libjavaplugin_oji.so
/usr/lib/mozilla/plugins/libjavaplugin_oji.so'
Restart Firefox and Tools -> Addons -> Plugins. If the plugin was successfully installed you should see Java(TM) Plug-in among the plugins. Now, if you also want to run java programs using Sun's java type in a console:
My shell
[root@shadow ~]# ln -s /opt/jrel.6.0_16/plugin/i386/ns7/libjavaplugin_oji.so
> /usr/lib/mozilla/plugins/libjavaplugin_oji.so
You have mail in /var/spool/mail/root
[root@shadow ~]# ln -s /opt/jrel.6.0_16/plugin/i386/ns7/libjavaplugin_oji.so /usr/lib/mozilla/plugins/libjavaplugin_oji.so
ln: creating symbolic link `/usr/lib/mozilla/plugins/libjavaplugin_oji.so': File exists
After restart Firefox i don't see any new plugin. ?
View 5 Replies
View Related
Sep 18, 2009
I would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
[Code].....
View 4 Replies
View Related
Apr 29, 2011
I just noticed that I can no longer login to the forums unless Java scripts are enabled in my browser (Opera). Is this a new feature?
View 6 Replies
View Related
Sep 2, 2009
might sound stupid as this must have been asked before but how do i delete my profile?
View 2 Replies
View Related
Nov 14, 2010
I'm running 11.3 KDE 64 bit and I can't figure how to paste files on the desktop. I know there's some setting in KDE to allow dragging files to the desktop. How is it done?
View 6 Replies
View Related
Apr 11, 2010
Too Many Snags with Advice, newbie getting too many people upset,
View 9 Replies
View Related
Apr 29, 2011
Want to move/place applications to the panel, in 11.04. Can't seem to locate where/how to do it? Should be very simple and I bet my face will be red.
View 4 Replies
View Related
Oct 27, 2010
In placing array data into while statement that will be looped to recreate more lines as information is populated.
unfortunately i'm not getting this to work.
PHP Code:
View 2 Replies
View Related
Jan 20, 2010
There is .profile under my directory and I found another one under /etc/ . I know the first one is the one we edit for path and alias and stuff. but how does it differ from the one in /etc?
View 2 Replies
View Related
Aug 26, 2010
I am just started to setting up a samba PDC at our office.MY problem is my xp client is logging in to server but not loading the profile.its booting with tmp profile and whatever the changes I do in that profile.its not updating that in the server. And my client.log file is showing following error. '/home/user4' does not exist or permission denied when connecting to [user4] Error was Permission denied. I gave full right to /home/user4.But still its giving this error. User4 is given same password for linux and samba. How can I add a profile of user to smb pdc?
RHEL 5.0
Samba version is 3
View 1 Replies
View Related
Feb 7, 2011
So I've always added an export line in the /etc/profile that has the proxy server for our organization. Now there is a warning in that file that I should use a custom .sh in the profile.d folder. Can I just create a myproxy.sh with the export http_proxy="insert my proxy" line in it and call it a day or do I have to do some crazy shell script?
View 2 Replies
View Related
Mar 23, 2009
what is the use of placing any file in /etc/cron.d folder , is there any use of it ? will crond daemon run the files automatically which are placed in /etc/cron.d daemon ?
View 1 Replies
View Related
Jan 11, 2011
I'm using Squid in our company network, to block access to certain websites. Some websites are blocked for all computers, except for a few. These computers are grouped in an ACL, in squid.conf
Since the group contains only a few computers, this is no big deal and it works fine. But now we wish to expand this to more computers and regulate access to certain websites per computer more detailed. This means that the ACL list in squid.conf will grow significantly and I don't think that is a good thing.
The best solution would be to move all the ACL's from squid.conf, into a MySQL database. However, I have no idea how to do that.
As far as I know, I need external_acl_type to do this.
View 7 Replies
View Related
May 6, 2011
Is there any method for placing translations in parenthesis at first occurrence? I need something similar to the acronym package, but instead, storing translations and printing brackets only after the first occurrence.
E.g. (pseudo-code):
Results in:
Do you like to eat bananas (xiangjiao)? No I don't like to eat bananas.
View 4 Replies
View Related
