Tried to install nvidia driver and package, nvidia-glx, nvidia-kernel-dkms and nvidia-settings installed.
When trying to install nvidia-xconfig i have: error, not found.
Now I have only login prompt, no GUI, have tried to search, but have no clue.
TRIED TO GET NVIDIA TO WORK BUT ALL I GET IS
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
If i run nvidia-xconfig, it will say driver not found, and the next time i boot, it will end up in a terminal. why is it so? (by the way i recovered from that using backup of xorg.conf). And i dont think now the nvidia-driver is present.
View 14 Replies View RelatedSo I think I did something stupid here, was following the instructions on the debian howtos to installing nvidia, and after I did apt-get install nvidia-xconfig my power went out and when I went to restart my computer, whenever I tried to startx it gave me some cannot connect to X session, so I left it over night and went to bed, this morning it took a long time to start, longer than usual. and my browser stuff in my fluxbox was reset(book marks and favorites).
View 8 Replies View Relatedjust did a fresh testing install using the debian installer. i have gnome and an nvidia card. i installed the nvidia driver using the debian way outlined on the wiki. then i ran nvidia-xconfig and it generated an XF86Config file instead of an xorg.conf file. everything works, but shouldnt it be an xorg.conf and if so, maybe it isnt reading the XF86Config file at all?
View 10 Replies View Relatedi am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies View RelatedI have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
So I followed the instructions to add the rpmfusion repos and add the protection to to the repos as well.
But, when I try to add the nvidia drivers as talked about on [URL]
My terminal says 1 package excluded due to repository restrictions. Now my Fedora display is wacked and I can't run nvidia-xconfig at all.
Nvidia now provides a utility to easy configure the X server configuration file (besides the manual configuration). It is provided as a tar.gz file and it can be downloaded from the official Nvidia driver download website.
I used the standard procedure to install such files:
unpack the archive
change directory as root into the unpacked archive
./configure
make
make install
but it did not work.
I am using Linux Ubuntu. My video card is GeForce 4 MX and the driver is 96.43.13.
The archive does not provide any install instructions.
After a recent kernel update, I no longer get a login prompt on the first tty after booting. I can get to one in the second tty, and on the first one after hitting Ctrl+Alt+F1 to go back.
View 4 Replies View RelatedI installed 2.6.38 from backports. It boots OK, and among the start-up messages it says it has started kdm, but then it offers only a console login prompt, no GUI. I assumed (perhaps optimistically?) that newer kernels would be backward-compatible, and that any dependencies on other software would be enforced by the package mechanisms. Running amd64, Squeeze, KDE.
View 6 Replies View RelatedOn a Debian 5.0.8 I have a problem with OpenSSH server (sshd): when connecting to it from another host there is always a 10 seconds delay before sshd gives login prompt to the client. After the connection is established the communication goes on without any interruption. This long delay started to happen a few months ago and sshd_config was not changed at that time.
Here is a short description of the conversation between the putty client (on MS Windows) and sshd:
- putty client starts connection to sshd
- 10 s delay
- sshd returns "login as:"
- user types username in putty window
- sshd returns "password:"
- user types password in putty window
- sshd returns MotD and shell prompt
Here is a short description of the conversation between the OpenSSH client (on a Debian 6) and sshd:
- client does "ssh user@host.foo.bar"
- 10 s delay
- sshd returns "Password:"
- user types password
- sshd returns MotD and shell prompt
I tried connecting from:
- local host - NO DELAY
- a host on the same subnet - delay exists
- a host on another subnet - delay exists
I've found the following suggestions but to no avail (of course I restarted sshd after changing its configuration):
- on server put "UseDNS no" at the end of /etc/ssh/sshd_config
- in /etc/hosts on the server define mappings between IP addresses and host names for the ssh clients
- on client use "GSSAPIAuthentication no" in /etc/ssh/ssh_config
Here are some logs and configurations:
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
I just installed Fedora 12 on a laptop. I changed the default shell on the root account to /bin/tcsh and changed the runlevel to 3 and then rebooted. Now I can't login into the root account: it returns me immediately to the login prompt and I can't see any error message (the screen is cleared).Why is this happening?Can I boot into some sort of safe mode so I can undo my changes to the /etc/inittab and /etc/passwd file?I tried booting with a Live CD with the intention of mounting the filesystem and making the changes, but the new filesystem is a LVM and it won't let me mount it (or I don't know how to mount a Logical Volume).
View 3 Replies View RelatedI'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.
But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:
"failed to load session 'cinnamon'"
I cannot login as normal user or root.
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I don't get a UI login prompt at startup and it makes a sound. I'm using 10.04, though this did happen to me in 9.0x as well. When I press ctrl-alt-F1, I login and sudo gdm stop and do sudo startx this seems to put me at root and there is an error with the applets and the panel does not load. "Killall gnome-panel" does not fix it.
If I simply do startx (w/o going to root), it goes to a black screen and if I press ctrl-alt-F1 it repeats "No protocol specified" until I get the error message xinit: Resource file temporary unavailable (errno 11): unable to connect to Xserver.
I managed to change the background by copying over a new image file to some directory. However, there is still the big boring login window. Is there any way to change that? I'd like something darker, and smaller. I copied over the image file to /usr/share/backgrounds/warty-final-ubuntu.png My image file was actually a jpeg file, but copying it over to /usr/share/backgrounds/warty-final-ubuntu.png posed no problems.
View 9 Replies View RelatedI am not getting the new login prompt that allows you to select classic. I still get the same login prompt i had on 10.10. How do i correct that?
View 1 Replies View RelatedThis might be simple but i am unable to find an answer anyplace online. How do you change the terminal login prompt on a Ubuntu server?Right now when you go to log into the server it displays:<old_servername> login:
I would like it to just display login without the server name or the new server name. I am not sure how that info go in the login prompt to begin.
I dont have login prompt after loading OS , i only see mouse cursor, now i cant use my laptop.(i have the same problem in safe mode),
View 5 Replies View RelatedWe've set up a Red Hat Enterprise Linux 5 server and can log into it remotely just fine (with root and other users), but if I try to log in locally with a keyboard and monitor connected to the machine, I keep being returned to the login prompt. If a login is incorrect, I get an error message, but if it is correct then the screen just blanks and shows the login prompt again.While booting the only error message that comes up has to do with SNMPD, so I don't think it's related.
I read this post on the forum which seemed like a similar problem but it didn't help (I wasn't getting the "Module is unknown" message he was). I also read another post somewhere that said he was having the problem because the server was trying to use AD to authenticate, but I checked that and it's not the case with our server.From what I'm told (I didn't set up the server myself) it used to work fine, but then "something" happened one day that made it do this.
i have a brand new CentOS 5.2 installation and cannot login because it does not react to any keyboard inputs.By the way ... the cursor is still blinking - so the machine is running.
View 14 Replies View RelatedI'm currently running 10.04, when I went to go turn on visual effects it gave me a prompt to install an nVidia driver, after installation was complete it said I had to restart. When I start it up the screen flickers from being on and off, it then finally stops at being on but nothing shows up. Please help. My graphics card is nVidia G210M. Sony Vaio.
View 4 Replies View RelatedIs there a way to include a profile pic within the GUI login prompt for Fedora 11?
I have the profile pic set in the "About Me" configuration page, and this will show up in my toolbar in the upper right hand corner, but when I log out and go to select my login name from the list of users within the login prompt, I don't see my pic, just the generic user picture.
Is there a way to set this? I have multiple users using this machine. It would be nice if they can just visually scan for their picture to login with.
I made my Fedora 13 box boot up automatically by adding the following to /etc/gdm/custom.conf
Code:
However, when it boots up it prompts me for my password so it can connect to my wireless network (I think it said something about not getting my user password at login). Is there anyway I can get it to remember this?
I would like to make this automatic because this will be a remote box that I will use as a file server, but it wont be turned on all the time. So I'll turn it on when I need it, but I'll need to connect to it remotely, so obviously it needs to be on the network.
Status: openSUSE 11.3; Fujitsu Tablet ST4110.I've managed to install successfully openSUSE 11.3 on my old Fujitsu Tablet 11.3. nomodeset needs to be used at GRUB boot. Now, at the login, when I click Others, and prompted to type a username, when I clicked on the virtual keyboard at the bottom right corner of my screen, the I-beam icon looses focus from the entry box, and each character pressed on the virtual keyboard does not appear on the entry box. When I try to click on the entry box, focus cannot be returned to the entry (ie. the I-beam icon does not flash at the entry box).
View 7 Replies View RelatedI had received ununtu HH CD, which I loaded few times in few machine without problem (CD is ok). But in a perticular machine ubuntu HH, makes the screen garbled during installation and after installation at login prompt, but screen is just OK before the login prompt. This is happening in one machine and when i tried to load ubuntu 9 and fedora core in this machine, all goes fine (installation and use) means machine is reasonably ok. As I load edubuntu on HH, hence this ubuntu loading is important for me.
View 1 Replies View RelatedWhenever I boot up my computer, Ubuntu (10.4) brings me to my desktop, then immediately displays a prompt to enter my login keyring. After some searching on the forums, it appears that this is because I set my laptop to auto-login. Am I missing something here, but what does auto-login have to do the the keyring? Why do I even need to enter that password? I understand that many Ubuntu users are picky about security, but why isn't their any option to disable this? It's almost as bad as UAC from Vista, which is one of the reasons I'm dual-booting Ubuntu in the first place. This is an annoying "problem" that has been bugging me since I first installed Ubuntu - how can I change it?
View 9 Replies View RelatedI installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?
View 4 Replies View Related