goes to sleep just fine but won't wake up... in Windows, I see that it only supports Sleep Mode S3, which it calls hybrid sleep. I know that the video driver is the key to getting it working properly in Windows, I can get the exact name of the driver if needed but I do know it is nVidia.
View 5 RepliesI have recently replaced an older server with a new Intel Xeon quad-core processor. The old machine was running FC6, the new machine is running FC11 64Bit. The problem that I am having is that printing to networked printers prints 2-3 pages, then waits 8-10 seconds and then prints 2-3 more pages. This repeats until the printout is completed. My first thought is that FC11 (or somewhere between FC6 and FC11) introduced some way to limit activity to devices? The confusing thing to me is that I went from a single CPU to a quad core machine, increased the memory from 1Gb to 3Gb, moved from a 32 bit machine to a 64 bit machine and I am running the same applications... they just run slower now...
View 10 Replies View RelatedAll I want to do is to be able to shut the lid on my laptop, have it go into suspend like it already does, but upon opening it again, successfully start up again. It'll sleep just fine, but if you close the lid and try to open it again later, the lights will indicate it is starting up, but the screen won't initialize, and I am left with a blank, black screen.I've tried a line of code to enter into my menu.lst file, and it seemed like it should work, but it borked my computer and I had to manually reinstate the line of code it had before.
View 9 Replies View RelatedI have an Acer 1551 4755, with Debian Squeeze. Normally my Debian Squeeze installations and suspending work fine on my other 2 laptops. For some reason this one is troubled. I can put into sleep with "pm-suspend" or "pm-hibernate" but the thing is that my laptop never wakes up. I endup restarting.
here is the hardware and module list
[URL]
My laptop won't wake from sleep. I hit the powerbutton and it'll blink a few more times, turn green and the keys will light up but the screen stays black.
Running sony vaio s with windows 7 and 11.4 duelboot. I really need it to be able to suspend and wake because I'll be taking it to college in the fall.
I tried to follow this guide on how to setup wake-on-lan with a laptop, but instead of
Quote:
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: yes
I got this:
Quote:
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: no
I must confess I didn't see any setting in the BIOS that directly referred to WoL, but I enabled something and hoped it should be right. Is this the problem? Is there any way to check if the hardware supports WoL other than looking through the BIOS?
I am Using HP Pavilion DV6Z. Just started using Linux today, so I just close LID like usual, thinking that I just open back the lid and Ubuntu will wake up but it doesn't, screen are black, but laptop still running
View 2 Replies View Relatedi have windows 7 & ubuntu 10.04 on my laptop...and boot into win 7 im able to enable wake on lan on the nic. so my questions is if i enable WOL thru windows 7 when it boots up will it boot the win 7 or ubuntu? when i press the power button it automatically boots up ubuntu. im jus wonderin cuz it looks a lil easier to enable wol thur windows cuz i just gota check a box
View 1 Replies View RelatedI've just a had laptop meltdown which resulted in the acquisition of a replacement (HP635) sporting a realtek wireless NIC. Found the drivers and installed them and all is well. HOWEVER, the card is not activated on wake from sleep mode. This is kind of astounding to me. Every crappy windows version that I've used can handle this situation. Many searches, however have failed to yield any help. After every resume from sleep mode I have to run ifup to start wlan0. Surely this is not the only way it can be? I have to assume that I'm not getting something simple, and someone here can point out my failing. or if you can just sympathize. running 11.4 here using the realtek 8192 driver set to start at boot time. Though none of the other settings have had any effect on this problem.
View 5 Replies View RelatedI have just installed ubuntu server 10.04 LTS on a laptop, and I would like to control it remotely.When I manually turn on the computer I can successfully use SSH commands to turn it off. But when I wake on lan turn it on, it doesn't power off. It hangs on a black screen where the fan and the hard drive seem to be off, but the ethernet light is on and so are all the computer lights.
View 8 Replies View RelatedI have a problem with Cairo-dock not auto-hiding when my laptop wake up from hibernate. Anyone know a quick fix for this? Ubuntu 10.04 Cairo-dock with OpenGL
View 2 Replies View Relatedi am trying to get F12 running on my Dell D600 laptop and am having some SERIOUS networking issues.
i had F11 running, but the upgrade process was FUBAR'd and doesn't work so i had to do a clean installation. upon finishing that, i now have no network connectivity.
i try connecting an ethernet cable to eth0 (LAN connection), no connection. i try connecting to my wireless network using wlan0, no connection
i turn off network manager, try adding them manually same thing.
how the frick do i get this thing to connect to the world?
Edit: p.s. the only connection that i've been able to get so far is some halfway connection to my wireless, but it puts me on the 10.x.x.x subnet, and my entire internal network is on 192.168.1.x.
Edit: one other thing, every time i make changes and reboot it tells me to log into system-config-network as root and make further changes
My FC12 laptop won't boot. During the attempted boot, after blue/white progress bars finish displaying on the bottom of screen, nothing more seems to happen. The screen isn't totally blank in that I seem to have a text cursor and keyboard input is displayed. But, no prompt, no login prompt, X isn't running, etc. If I hit ESCduring boot, it displays the boot messages and the boot sequence stops after "Starting atd". I'm not sure if it's related, but I had previously experimented with creating a new xorg.conf file by running "Xorg -configure' and was testing the new file with "X -?? /etc/x11/xorg.conf.new" (I forget what the -?? option was). I assumed that this would not overwrite the /etc/x11/xorg.conf file and that if I ran into problems, that the original xorg.conf would be in place. how I can get this miserable thing to boot?
View 4 Replies View RelatedI have tries numerous methods to connect my laptop running Fedora 13 and my Netgear WGPS606 print server all without success. Has anyone made a successful connection and if so how? when running Windows 7 I have no trouble. Both Windows 7 and Fedora connect to the internet without a problem.
View 1 Replies View RelatedTrying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
I need to remote access a PC(running winxp) from my laptop(running ubuntu 10.10) over internet.
View 1 Replies View RelatedOfflate I installed F11 i586 on my laptop. F11 shares the hard disk with Vista Home Premium 32-bit. The problem is that when running F11 (or even Ubuntu), my system shut off suddenly(not a normal OS shut down, but a sudden power off without any warning). This could have been a hardware trouble(heating) but it doesn't happen with Vista.
Machine specifications:
Maker: Toshiba
Model: Satellite L305D-S5881
AMD Turion X2 Dual Core Mobile Processor RM-70
3072 MB 800 MHz SDRAM
I don't want to open up my machine unnecessarily, if it isn't a hardware issue.
I am not sure how to verify the bit length of the machine and the OS and does it create a compatibility issue ?
Your advise would be highly appreciated.
Raman
Running Fedora 12 with all the latest updates installed.
Using Radeon card with the experimental Mesa 3D driver. (The opensource stuff rather than ATi's closesource driver.)
Most of the time when it goes into screensaver, and turns off the monitor, it can't be wake up again.
The OS is still running, I can access it's web server, ssh, everything, just can't use the desktop!!
I have tried nomodeset and pcie_asm=off in grub but neither of them fixes the problem.
What else should I try?
I am running a Fedora 12 installation in my bedroom as a slave mythtv frontend. I have set it up to be able to put the PC to sleep and wake up with a MCE remote. This has been working for near on a year now with no issues. Yesterday I did a yum update and ended up with kernel 2.6.32.16-141.fc12.i686.PAE (up from 2.6.32.12-115.fc12.i686.PAE)
Now everything seems to work fine however I can put the PC to sleep with the remote but I cannot wake it up with the remote. a cat of /proc/acpi/wakeup shows
Code:
DeviceS-state Status Sysfs node
SMB0 S4 disabled pci:0000:00:03.2
USB0 S4 enabled pci:0000:00:04.0
USB2 S4 enabled pci:0000:00:04.1
US15 S4 enabled pci:0000:00:06.0
[Code]...
At the grub prompt if I select the old kernel 2.6.32.12-115.fc12.i686.PAE then the computer will start up with no graphical prompt (need to figure out how to work kmod-nvidia i guess), but I can use the remote to put the pc to sleep and wake it up again. Also using the old kernel and telneting into the PC I see that /proc/acpi/wakeup is no different. Does anyone have any clues on hoiw to get wakeup to work with this new kernel? Or how do I roll back everything to the older kernel and get my graphics driver back (i tried to reboot with old kernel and then yum erase kmod-nvidia-PAE and then yum install kmod-nvidia-PAE but no luck.
Another thing worth noting is that I can wake the computer with the power button, just not the USB remote. THere is also nothing in the motherboard bios for setting wake on USB.
On fc7-10 I was able to get them going after installing gstreamer packages with yum.
For fc11 I have followed half a dozen guides, installed numerous packages, but can't seem to figure out what is missing.
Anyone know what to install for mp3's on fc11 ?
I've ran "powertop" on my computer and it showed horrible amount of wake-ups per second:
Code:
Cn Avg residency P-states (frequencies)
C0 (cpu running) (26.7%) 2.81 Ghz 100.0%
polling 0.0ms ( 0.0%) 1400 Mhz 0.0%
C1 16.2ms (60.5%) 1050 Mhz 0.0%
C2 0.0ms (12.8%) 700 Mhz 0.0%
350 Mhz 0.0%
Wakeups-from-idle per second : 63944.8 interval: 5.0s
no ACPI power usage estimate available
Top causes for wakeups:
45.1% ( 15.6) <interrupt> : pata_atiixp
26.0% ( 9.0) <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
9.2% ( 3.2) <kernel core> : hrtimer_start (tick_sched_timer)
5.8% ( 2.0) <kernel core> : add_timer_on (clocksource_watchdog)
1.7% ( 0.6) <interrupt> : ohci_hcd:usb4, radeon, yenta
1.7% ( 0.6) Xorg : queue_delayed_work (delayed_work_timer_fn)
Suggestion: increase the VM dirty writeback time from 5.00 to 15 seconds with:
Echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
This wakes the disk up less frequently for background VM activity
Q - Quit R - Refresh W - Increase Writeback time
If I wait it decreases to 50000, but it is still huge!
Situation is duplicated after complete F12 re-install. All defaults are used and no changes performed after install. Just checked again and let computer run idle for a while. Powertop reports 79604 wake-up per second, even more than before. Again, the top cause is "pata_atiixp". Also, performing suggestions of powertop shown at the bottom of the program does not help either. That decreases wake-up by a few hundreds only. Wake-ups are still well over 50000.
I been a windows guy forever, and wanted to make the switch. Anyways, I am hoping to do a wireless wake-on-lan from a windows box. I have an older laptop that has a dead screen and I am trying to use it as a server. So, I want to be able to VNC the linux box from my vista machine. I think that's going to be straight forward. But, the linux machine doesn't have a builtin wireless card, so I am using a USB wireless deal. If I let the laptop hibernate/sleep after being idle, can I wake from my vista box over my network?
View 2 Replies View RelatedI've configured my F12 system to go to sleep when idle for a period of time and so far everything has been working out well except that it appears that the USB ports are completely dead with the system is put into sleep. I can't wake it using keyboard or mouse. only with the power button. Anyoen else experience this or know how to allow sleep from keyboard/mouse?
View 14 Replies View Relatedi need the Web Tools Platform for eclipse. This is not a rpm-packet.But I can't install this with the software update from eclipse from URL...Cannot complete the install because one or more required items could not be found.
View 10 Replies View RelatedI attempted to install the new kernel 2.6.29.6-217.2.3.fc11 (x86-64) A depsolv message appears:
Quote:
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by (installed) kmod-wl-2.6.27.19-170.2.35.fc10.x86_64-5.10.79.10-1.fc10.x86_64
kernel-uname-r = 2.6.27.21-170.2.56.fc10.x86_64 is needed by (installed) kmod-wl-2.6.27.21-170.2.56.fc10.x86_64-5.10.79.10-2.fc10.x86_64
[Code].....
I upgraded from fc10; there was a residue of four fc10 2.27 kernels in /lib/modules from my fc10->fc11 upgrade; I moved them to a new subdirectory /usr/oldmodules, but the yum update command still produces the same failure message.
I was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
[code]....
its been a long time since i was last on here, (2006)
I am trying to compile ffmpeg (and libraries) but im stuck. I am running x86_64 FC11 and want to compile 32 bit binaries so i can post them online for people to download, and mine is different then the ones hosted by the yum repo's.
here is what the output is
Code:
[rbehera@roflmao ffmpeglinux]$ ./configure --cpu=pentium3 --arch=x86 --enable-cross-compile
[rbehera@roflmao ffmpeglinux]$ ./configure --cpu=pentium3 --arch=i686 --enable-cross-compile
[Code].....
I recently update FC10 to FC11 and Yum has stopped working. Also, "Add/Remove Software" has no packages listed. And, I have no Software repositories listed. When I try to run Yum I get the following:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
[Code]...
it's possible to use preupgrade to go directly from FC8 to FC11.
Also, I'm wondering if this will allow me to avoid formatting my hard drive or not. I'll have backups ready just in case, but was hoping maybe I could get away with not having to do the old two-step shuffle with all my data.
After a base install of FC11 i don't have vimdiff nor can i get it with yum
View 1 Replies View Related