I want to download with yum but always see this errors:
And at last the download speed comes very slow:
This is my etc/yum.repo/fedora.repo:
Fedora.updates.repo:
There is no other file in the /etc/yum.repo/
I'm trying to download GIMP but when I click install I get this message: But you can see in the top right I am connected. This happened when I tried to install tor as well.
View 2 Replies View RelatedI have tried so many download managers it ain't funny, but there's one thing they all don't seem to know how to do well, and that's resume problematic downloads. I have used both fast and slow Internet connections on 3 continents (currently I'm on a slow and intermittent one as I live in Burma) so speed doesn't seem to be what causes the problem. And I download from many, many different sites, so it's not site specific either. The problem is as follows. I'm downloading a file from a server that supports resuming downloads but something goes wrong with the download and the download manager reports an error, like "size mismatch", or "timeout error".
What I really, really want to know, is why can't these managers resume downloads that experience these errors? Why can't they set markers during the download process (say every 5MB) so that if a problem like a size mismatch, a connection dropout, or a timeout occurs, then it can backtrack only slightly and then resume? I download a couple of shows from revision3 each week and more often than I care to remember they've failed at around 70% of a 300MB+ download and merrily just start downloading all over again. Another frustrating thing is they ditch the file that didn't finish, so I can't even watch the part of the show I had. I live with it, though it's very frustrating, but I wonder why these download managers aren't more intelligent.
I am getting this errors when I check for new updates:
Code:
W:Failed to fetch [URL] 404 Not Found
, W:Failed to fetch [URL] 404 Not Found
, E:Some index files failed to download. They have been ignored, or old ones used instead.
This is our first time choosing and installing linux. Our other servers are all windows 2008 x64. We were told to install fedora 13. I can only find a download for the desktop version and we're looking for the SERVER x64 download. Could I please get a link?
View 7 Replies View RelatedI',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
i have a c++ program and i tried to run it using gcc command and it gives header files error i got the header file now but dont know where to place those files?can any one got the idea??? we could not place header files in usr/include folder!
View 7 Replies View RelatedNot sure how this happened, but can't get back to a 'yum update; yum upgrade' without errors.
View 12 Replies View RelatedI am new to Fedora (using Constantine). I want to like it and it works nicely with on my Thinpad but there is a problem that would make me swith back to Ubuntu/Mint if I don't find a solution to it: I get dependency errors all the time missing librpm.so.0()(64bit) and librpmio.so.0()(64bit)
First I had this problem installing KDEnline and I thought, this program might be to exotic but the same problem stopped the installation of OpenOffice which is very strange. Is installing programs always such difficult for all the different packages like for Open Office? Is Fedora maybe to difficult for me as a intermediate user?
I'm building a file server, but before the admins move this to the networking forum' this IS about the kernel.
Anyway, I'm building a file server... a very basic thing. not much to it at all.. which is kinda the root of the problem... this is an old Dell (ugh! I know!) Dimension 8300. it's running a 2.6 GHz Celeron (Northwood die, so single-core), with (at the moment) a mere 256 MB of RAM... so I wanted to build a kernel that really minimizes its presence in my minuscule amount of RAM using this guide, I have gotten so far as the actual Kernel configuration. wherein it says to cd to your kernel's directory and use the 'make xconfig' command... but when I do this, it gives me the following error:
Code:
so I've never compiled my own kernel before, so I haven't a clue what's wrong, or what I need to do
I needed a DC client which supports a particular adc protocol. Valknut and LinuxDC++ do not work but other users were saying that eiskalt dc works well with the particular hub. (These guys happen to use Ubuntu.There's a deb file available on some server.)However, I could not find the rpm file online but I did get the source code. While compiling, I get an error. I am quite new at building from source and I'm not able to understand the error...Here's the output.
Code:
18:34:18 builddir $ cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr ../
-- The C compiler identification is GNU
[code]....
I installed Virtualbox ose on fedora 14 I686 latest version. then when I rebooted the computer,I see 2 errors that Virtual box client not found.
Then Fedora will not even get to the login screen.it hangs at ada.
On a previous thread, I explained how I installed Fedora 14 from the live image disk onto a HP 2140 netbook only to find I was missing the development files. Stoat helped me use the more complete install DVD from Fedora 14 to install the development tools (rather than doing a complete reinstall -- which I would do if it made this work).
Unfortunately, I'm still unable to make PartImage 0.6.9 install. When I try, configure says that the bzip2 library (libbz2) is not found or too old. Apparently, this is because it can't get it to respond to BX2_bzopen from within the library. I think because it can't find the library. Inside the config.log file it seems to indicate that from an -lbz2 not found. Now I'm guessing that there is some trick to this, maybe some way of setting the library path to include the location of this and possibly other libraries under Fedora 14. I've checked the library's location and it seems to be in /lib as far as I can tell and bz2 does work, so it's somewhere. Of course it's possible since PartImage is pre-version 1 but doesn't have much if any activity on its forum that something has changed position in Fedora and the install isn't looking for it in the right place.
I've seen one blurb in the PartImage files that indicates that maybe using env to set environment variables on entrance to configure might work, but I'm not sure what variable to set or how to make it find the bz2 library. Note that I've been a UNIX user and administrator in the past, but that was in the System 7 days so that's rusty and I have no prior experience with LINUX of any kind.
I am very new to linux and I am running into an issue..I've gotten soem new HP blade servers and they cam installed with RHEL 5.3 I need to update them to RHEL 5.4 I register them with my rhn subscription, then once I see my systems online, i run yum update from the command line.
It seems to find a ton of updates and takes a long while to DL everything.Do I have to tell it to install the downloads? I don't think I do...I get some errors about timing out for the last few updates.theni reboot, but when i check redhat-release it still says 5.3
I know I have this problem but how can I fix this dependency error?
Code:
Dependency Resolution Errors:
Package: vlc-core-1.1.8-1.fc15.x86_64 (rpmfusion-free-rawhide)
Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit)Package: gstreamer-plugins-bad-0.10.21-2.fc15.x86_64 (rpmfusion-free-rawhide)
Requires: gstreamer-plugins-bad-free >= 0.10.21
Installed: gstreamer-plugins-bad-free-0.10.20-3.fc14.1.x86_64 (@updates)
gstreamer-plugins-bad-free = 0.10.20-3.fc14.1
Available: gstreamer-plugins-bad-free-0.10.20-3.fc14.i686 (fedora) .....
This was also posted under Newbie Forum as I was unsure which was the best spot. On a fresh install of Fedora 12: I am trying to do a software update and keep getting these errors. I am new to Fedora but have used Ubuntu for some time. An Internal system error has occurred:
Under more details it states:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
[Code]...
Now I don't know if those errors each apply to a distinct update but theres about 430 updates available. It looks like maybe I need to add something to the repository? I don't know
I just installed Fedora 9 for the first time and have been unable to run updates nor am I able to use the add/remove programs feature. With the system updates the error I receive is within the /urs/share/packages area. I posted this http://amahi.pastebin.com/m131ea1d2 I also receive a different error when I run the Add/Remove programs feature and I receive a similar error. I also tried running these commands from root while logged in as root -- yum clean meatadata
yum -y update but this had no change to the system. I also thought it may have been a RPMFusion issue so I looked at their FAQ and ran the command line to enable RPMFusion and it advises that this package is already installed. I am getting confused by this and not sure where to start so that I dont keep going over the same things with and getting the same results.
On my FC11 installation Palimpset Disk Utility icon in the top menu bar is reporting that I have a disk failure with the caption "one or more disks is failing".When I open up the details section in Pilimpset I can see that "2 sectors are failing",I have checked this with gparted checking facility and it reports that the disk is OK.What I would like to do is to check the disk using a command like tool or ofline tool, which would then tell me where those bad sectors are on that partition so that I can resize it (using gparted) and have the bad sectors in NON ALLOCATED DISK SPACE.
View 4 Replies View RelatedI had some problems and had to upgrade my motherboard. I chose the same manufacturer and haven't had any major problems booting into Fedora 11. (I was totally amazed by this BTW).The only thing is that I have 8 GBs of memory in my computer and System-monitor now says that I only have 3.2. Lastly my nvidia driver which is working correctly, is giving errors about python at bootup. Something about glib being presentAnother weird thing is that GRUB will not let me interrupt it either during normal usage nor with a live CD loaded. This also started happening after I installed Fedora 11 on my old board.
View 9 Replies View Relatedhow can i delete these folders without recieving errors?
View 7 Replies View RelatedThe error message is: "est Transaction Errors:
installing package kernel-debug-2.6.31.6-166.fc12.i686 needs 27MB on the /boot filesystem
installing package kernel-doc-2.6.31.6-166.fc12.noarch needs 27MB on the /boot filesystem
installing package setroubleshoot-2.2.50-1.fc12.i686 needs 27MB on the /boot filesystem
installing package perf-2.6.31.6-166.fc12.noarch needs 27MB on the /boot filesystem
installing package hunspell-1.2.8-13.fc12.i686 needs 27MB on the /boot filesystem
installing package gettext-0.17-16.fc12.i686 needs 27MB on the /boot filesystem"
I have boot as a separate partition, this time around I have set it to ext4 for the first time. That partition is only 250 Mb, but that has always been sufficient in the past, perhaps I am holding too many kernels or kernel versions?
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
I am running Fedora 12 64-bit on a MacBookPro5,1 system. After two weeks of not running Fedora on the system, I boot into it and check for updates with Yum Extender. It only finds a small handful of updates despite the fact that my other system running Fedora 12 32-bit has installed several update over the past two weeks. When I try to apply the available updates I get the following errors: Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)Dependency Resolution Errors:
Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package kmod-wl-2.6.32.9-70.fc12.x86_64-5.60.48.36-1.fc12.3.x86_64 (rpmfusion-nonfree-updates)Missing Dependency: kernel-uname-r = 2.6.32.9-70.fc12.x86_64 is needed by package 1:kmod-nvidia-2.6.32.9-70.fc12.x86_64-190.53-3.fc12.x86_64 (rpmfusion-nonfree-updates)
What is needed to resolve these update issues? Also, I suspect the system is not picking up all the updates that it should. What can I do to determine which updates the system should be getting?
I try to update my kde to kde 4.4.1 from updates repository but i get dependency resolution errors:
Code:
Dependency Resolution Errors:
I checked my system:
Code:
It means i have the newest versions. So how to update my kde?
Errors occurred when booting F12 on my laptop.
Code:
Mounting local filesystems: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
...
Starting system message bus: [FAILED]
[Code].....
You have to define PLUGINS in /etc/sysconfig/sipwitch before running sipwitch
Then the system froze there. Press Ctrl+Alt+F2 can enter command line mode.
I have two graphic cards on my laptop, one is Intel and the other is Nvidia. There seems to be something wrong with the Intel card and I changed into the Nvidia card to boot. Then the errors occurred. The driver of the Nvidia card has not been installed. How can I start my network in command line mode? I cannot enter graphic mode now.
I did 'yum update' this morning. It stopped with the following errors:
Code:
Install 7 Package(s)
Upgrade 207 Package(s)
[code].....
I just installed Fedora and it worked for a few reboots. I am getting the following errors on startup:
Could not update ICEauthority file. /var/lib/gdm/.ICEauthority
There is a problem with the configuration server.
I have a problem with getting my fedora 14 laptop to connect to my fedora 12 server that is hosting my smb HP Deskjet 5650 printer. The error that I get is the following: CUPS server error. There was an error during the CUPS operation: 'client-error-not-possible'.
I have been able to get my daughters Ubuntu laptop and my wife's Windows XP laptop to connect and print without a problem.
I have F13 installed on a Gigabyte MB with on board audio and rear panel plugs. I'm not hearing anyting from the speaker tests from System|Preferences|Sound GUI or from the SATA DVD with a CD inserted. (Or Rythmbox, or Amarok) I've tried headphones and amplified speakers with no output detectable. The 'aplay' and 'aconnect' utilities don't report any errors when probing the audio setup. Any suggestions on how I can isolate where the problem might be occuring? Can I use the a version of FedoraPlus or possiby easyLife on Fedora13 to update the codecs or drivers?The rest of the system is running great with most of the mysql and tomcat stuff porting over from Solaris with very few changes. Fixed color printing last night, but I seem stuck on audio for now.
View 2 Replies View Related