I am new to Fedora, and I noticed when I opened my home folder that I only had 54GB. My HD is 120, and when I used the disk utility, I noticed that 64GB are in ext4! What?! This was not a problem in Ubuntu, so why has it happened now? Is there anyway I can decrease the size of ext4 and give some of it to Fedora?
View 4 Replies
On F12 and sure need to upgrade. Way back when I first had a bad disk on the "system" disk that was 80G, I only had a 200G lying around. Next time that happened my other 200G wasn't "big" enough it said, so I put a 500G in there. Now it seems I got more bad blocks etc but I need to lower the size 'cos I don't want to put a 1Tb HDD in there. My question from all of this is, how do I decrease the image so I can put it all on a smaller HDD?
Used space on the system disk's partitions is about 30G, so an 80G disk should be sufficient. What I can think of is that I need to "move" all data to the "beginning" of the HDD, then make an image of it but and the entire disk, just the data. I've tried that with no luck since the image seem to get as big as the HDD, hence why I always needed to increase the HDD all the time.
How can I decrease the amount of video memory in a debian squeeze laptop? The amount of video memory is 1GB and I want to reduce it to 512MB or 256MB. How can I do this
View 2 Replies View RelatedDesperate to reduce RAM usage of my tiny VPS running Ubuntu 9.04 and Apache2.2.11, here I saw that:
On Linux, each child process will use 8MB of memory by default. This is probably unnecessary. You can decrease the overall memory used by Apache by setting ThreadStackSize used by Apache by setting ThreadStackSize to 1MB in.
So I tried to give the suggestion a try. But when I append:
ThreadStackSize 1000000
in my /etc/apache2/httpd.conf <IfModule mpm_prefork_module> directive, and restarted apache, it failed with this message:
Invalid command 'ThreadStackSize', perhaps misspelled or defined by a module not included in the server configuration
So I figured out that the relevant modules are neither enabled nor available on apache2. Now I am wondering whether there is a way to decrease the ThreadStackSize without the need to compile apache from source? If not, what should I do?
Currently, I have on internal HDD 160GB in size. 20GB are for windows XP partition and the rest is assigned for ubuntu partition(s?). i want to make it now more equal in size, but how can i do that? I'm using ubuntu 11.04...
View 3 Replies View RelatedI have two questions:
1- Does Linux operating system decrease the original size of the HDD? because first I was only using a Windows 7 Ultimate on my Laptop Lenovo G550 4446 the D:/ partition size was 140 GB Free of 190 GB.. After I installed the Linux ubuntu along with the other Windows 7 I found the D:/ partition size became 68 GB free of 122 GB... Why the hell the size decreased?? Did the HDD destroy?
2- How can I hack Wireless Network of type WPA2/WPA or WEP using the linux? I have heard that I can do that using Shell Konsole, but I can't see Shell Konsole in my Linux ubuntu 10.10... Is it required to be installed over the internet or something, or if it is already installed within the operating system, can you tell me where I can find it?
I want to make my photo less than 40 kb. My photo on scanning is 313 kb also I want to decrease pixel size to 110*140. How is it possible?
View 3 Replies View RelatedI have a 7GB unallocated space and I want to expand/increase the size of the preinstalled fedora 13 ext4 size from the unallocated space any ideas?**Using gparted live is not working is just displating the whole sda drive.
View 4 Replies View RelatedI'm having a problem with GParted. I'm trying to increase the size of an ext4 partition but the maximum is set to 9970 MiB. The option to increase its size is greyed out. How can I fix this?
View 7 Replies View RelatedI have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies View RelatedI am doing some benchmarking on EXT4 performance on Compact Flash media. I have created an ext4 fs with block size of 65536. however I cannot mount it on ubuntu-10.10-netbook-i386. (it is already mounting ext4 fs with 4096 bytes of block sizes) According to my readings on ext4 it should allow such big block sized fs. I want to hear your comments.
[Code]...
Mis-allocated 10g instead of 30g to /var/lib/mysql and realized mistake After Fresh Install and upgraded all servers. Using Slackware13.1, Xfce did some googling wondering if its possible to resize the above partition with fdisk. Read some things about gparted and wonder if it will work using Xfce.. i've never use kde or gnome. There is also mention of using live cd; I have no experience with any of the mentioned tools; just fdisk to partition and install. What is the best or simplest way to backup & restore; (I do have an empty sdb 160g but don't want to get into complicated raid or LVM setups right now because I still have to learn howto backup & restore do data to the point where I feel comfortable with it)?
Current setup: sda 160gb Hdd used 73.5 for following partitions: sda1 512m /boot; sda2 Extended Rest of Hdd; sda5 1280m /swap; sda6 8g /home; sda7 2g /; sda8 8g /usr; sda9 8g /usr/local; sda10 10g /var; sda11 10g /var/log; *sda12 10g instead of 30g /var/lib/mysql; sda13 10g /opt; sda14 5g /tmp Haven't configure mysql... so /dev/sda12 is empty except for system disk data the same goes for /dev/sda13 /opt & /dev/sda14 /tmp
We are currently running Redhat 5.4 64Bit (Build 2.6.18-164.e15) however having issues with tar files that are greater than 2TB in size.
We have been told that upgrading the kernel to support the ext4 file system (supported in version 5.5?) and mounting the current 10TB nas share as an ext 4 file system may solve our over 2TB file size issues. Are their limitations within the ext3 file system that cause issues to files greater than 2TB and if this is the case Do we have to update the kernel (complete rebuild), or can we load a package on the redhat box to support the ext 4 file system Where do we get the upgrade/package. I have logged onto the redhat site and can not find kernel updates but can find the full installation packages. We are not connected directly to the internet and do not have access to the update repository
I have nearly 200GB of space free on the HD with my linux main EXT4 partition, and I'm wondering if I can convert a large part of this to a new NTFS partition that I can use for my windows XP paralell install?
Basically, what do I have to do to resize and create the new partition and how do I get windows to recognize it?
I am running CentOS 5.5 with a 14T ext4 volume. We are sharing out a few sub-directories via NFS. Our customer was doing some penetration testing with our web app that writes to one of those NFS shares. We are not sure if they did something to cause the metadata to grow so large or if it is corrupt. Here is the listing:drwxrwxr-x 1 owner owner 470M Jun 24 18:15 temp.badI guess the metadata could actually be that large, however we have been unable to perform any operations on that directory to determine if the directory is just loaded with files or corrupted. We have not run an fsck on the volume because we would need to schedule downtime for out customers to do so. Has anyone come across this before
View 2 Replies View RelatedIn /proc/scsi/scsi, we can see the scsi host no. (scsi identifier no.). for e.g. Host: scsi4 Channel: 00 Id: 01 Lun: 00 In above e.g., scsi identifier no. is 4. Whenever we modprobe a particular module associated with scsi devices, we can see new entry in/proc/scsi/scsi with a greater identifier no. When we do rmmod on that module, the entry from /proc/scsi/scsi wipes off but still the counter of scsi identifier no. doesn't decreases. is is there any way to reset or decrement this counter so that next time when I do modprobe on scsi related module, it will assign no.s starting with 0 ? I found that during registering a scsi device, scsi_register() method gets value from "next_host" (which is a static int initialized to 0) and then increments next_host counter. Also, during scsi_unregister(), it decrements next_host counter. rmmod internally calls scsi_unregister(). So, if it is true then why the scsi host id. doesn't decrement during rmmod?
View 2 Replies View Relatedis lvresize with --resizefs options re-size the Logical Volume and then re-size the file system? i mean we don't need to use resize2fs?I looked at man pages but it doesn't explain this option.
View 3 Replies View RelatedHow can we find the maximum size of the inode table and what decides it, and how the maximum size of volume of file system is decided ?
View 4 Replies View RelatedI got a problem booting ubuntu 10.4 RC but i solved it by replacing root partirion uuid in grub boot menu then I disapled totally uuid passing to linux from /etc/default/grub . but something else i noticed why grub choosed insmod=ext2 why not ext4 specially I use now ext4 .I tried by editing the grub boot menu replacing "insmod=ext2" by "insmod=ext4" it booted and the three lines error during booting that i used to see them science ubuntu 9.10 totally disappeared . really I dont understand can anybody explane for me.and if what i did was right ,can anybody tell me how to make grub always and permenantly detect ext4 as ext4 not as ext2.
View 6 Replies View RelatedI had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
I have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
I'm trying to decrease the tcp TIME_WAIT state which, from what I understand, occurs on the host that initiates the closing of a socket by sending a packet with the FIN bit set. Most people say to change /proc/sys/net/ipv4/tcp_fin_timeout to a lesser value. I have tried this many times and it makes no difference. The TIME_WAIT's still linger for ~ 60 seconds. This link says that it actually adjusts the FIN-WAIT-2 state and I think they're right.[URL]
Quote:
/proc/sys/net/ipv4/tcp_fin_timeout
Time to hold socket in state FIN-WAIT-2, if it was closed by our side. Peer can be broken and never close its side, or even died unexpectedly. Default value is 60sec. Usual value used in 2.2 was 180 seconds, you may restore it, but remember that if your machine is even underloaded WEB server, you risk to overflow memory with kilotons of dead sockets, FIN-WAIT-2 sockets are less dangerous than FIN-WAIT-1, because they eat maximum 1.5K of memory, but they tend to live longer. Cf. tcp_max_orphans.
Here's what the netstat man page says about these two different states:
Quote:
TIME_WAIT
The socket is waiting after close to handle packets still in the network.
FIN_WAIT2
Connection is closed, and the socket is waiting for a shutdown from the remote end.
how to actually decrease the TIME_WAIT state?
Initially i was on kubuntu 10.10 with kde 4.5.x and i realized that animations throughout kde stunk. For example, the kickoff menu would raise and lower very jerky. So thinking this was a kubuntu or even a kde 4.5.x problem, I made a switch to opensuse 11.3 and kde 4.4.x. After install i noticed that all animations, including the menu raising and lowering, where very smooth and crisp (like they should be). I later realized I wasn't even using all my hardware's power so I put my two gtx 460s in SLI=auto. After a reboot I realized that once again all animations got jerky again . This leads me to believe,and for good reason, that kde's visual performance is degraded with SLI enabled.
Ps: installed kde 4.5.2 and still same problem
There seems to be quite a craze about reducing the Ubuntu boot times to 10 seconds. I never really reached the 10 second mark.. for me it was more like 30 seconds from when I selected Ubuntu in GRUB to when I was prompted to type in the password in GDM. First of all, is this what is meant by boot time? Secondly, I know this already is quite a good 'boot' time, but just for the sake of tinkering around, is it possible to reduce the time that elapses between the GRUB menu and GDM?
View 8 Replies View RelatedThe track pad on a Macbook Pro 8.3 is hypersensitive and interprets the lightest touch as a click. Even brushing the track pad with the sleeve of my shirt counts as a click. How do I decrease the sensitivity of the track pad?
View 3 Replies View RelatedI am running Arch on a Sony Vaio 64-bit computer with an ATI Mobility Radeon HD 4650 graphics card (xf86-video-ati installed).
I am attempting to decrease screen brightness; I have tried editing /proc/acpi/video/VGA/LCD/brightness (gives me: "write error: Invalid argument") and xbacklight -set <value> (gives me: "No outputs have backlight property").
Anyone know how I could decrease LCD brightness?
I have an issue with few servers. All have OEL 5.5 and various versions of oracle (mainly 10g something).
I've noticed on one machine that amount of free memory is slowly decreasing. When it comes to less then 30M, application has problems. Ive tried adding mem on this machine (virtual), and it behaves the same.
The same is on physical machines I have simmilar, if not the same config. Variations are with physical memory installed, and it does not matter if servers have 2G, or 8G, free -m gives around 30 free
It does not swap, and does not make some big issues on other machines, but on this one, application that uses this DB timeouts the user. Is there some chance to check what is creating this issue?
P.S. I've tried with DB admin to check something related to oracle itself, bit when we shutdown instance, Oracle frees 1.5G allocated to him, but nothing else. Will try testimg a bit more, but any thought on this is usefull. This is production server, so no big issues can be done. Will try to copy it to other hardware and do some testing, but then no App server available to attack it.
I am facing an issue with 100% CPU usage under my system when running VirtualBox. Here are some further details:
My System Information:
CPU 1 name: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz
CPU 1 level 1 cache size: 32K Data cache. 32K Instruction cache.
CPU 1 level 2 cache size: 1024K Unified cache.
CPU 1 Mips: 2926.20
[Code].....
Well, each time I run Windows XP from my VirtualBox, I see the CPU usage at almost 100%. I experience a slow system even if no programs were running on my hosted Windows XP version.
I was wondering if there is a way for me to play with the settings so I can slightly enhance the performance. My PC is relatively fast under my Linux operating system. I need to know if there are some tips that I may follow when configuring the settings of my VirtualBox so i can achieve better results.
I tried to install Portable VirtualBox using wine and even though I installed it on my /host/ folder (with 19 gb free) it downloaded some massive file on my Wubi installation (with 60 mb free) and now I am down to 3 mb left on Wubi and I can't find the massive file that it downloaded. Tried using the disk usage analyzer but nothing came up. Windows is unbootable so I can't use it.
Before this, Ubuntu would constantly decrease the amount of disk space I had free for no reason as well. It would jump from 120 mb one day to 50 mb.I moved my documents to my Windows folders but the disk space only stayed at 100 for another day or so before it went down again. apt-get auto/clean, localepurge, and deborphan are completely useless and there's something else going on behind the scenes here that I don't know about.Using Ubuntu Jaunty.
I am runnin Ubuntu 9.10- the Karmic Koala on acer aspire laptop. since everythin in this netbook is crap. so I hardly can see movies that so much going on in them( when so much happens, the screen freezer for a while therefore i miss the most interesting bits) I used kinda every players. the only one that works for me is mplayer since it does not require high spec it works good but it has its own costs. if I use mplayer then i have the porblem of the sound (eg i can hear stuff before it happening) I am now just wondering if there is a way to decrease the quality. I really dont care if i have great quality or not as long as i can c whats happening ( at least for this netbook anyway)
View 1 Replies View Related
