[code]...
you can find a cutout of an output generated by "iwlist s" command for a cell. Does anybody know what Quality, Signal level and Noise level mean? What is the definition of them? I searched for it and could not find good information on it. What do these Extra:*** fields for? What does it show in the example above? How were those values computed?
[code]...
What does the Quality, Signal Level and Noise Level actually mean? Which should I be looking for when looking for good APs?Is Quality the same as RXQ in airodump?
View 1 Replies View RelatedI've been able to kludge a kill script which finds the correct pid for the kdeserver (or gnome server) after my system comes up in run level 5 so I can drop back to run level 3 mode. Lots of experimentation showed me that using telinit 3 and telinit 5 would occasionally leave the video memory in a mess and I would have the black screen of death.
I set the security parameter setting to autologin for me since I am the only user of my machine, but I still have to kludge the default setting under sysconfig (the DEFAULT_WM) under Window Manager to pick a certain window manager, so it takes time to manually switch the desktop.
Right now I can leave the gui and drop back to cli, but painful experimenting showed me that killing the X server is a no no. Right now I kill the kde server, which sends the SIGTERM to the X windows manager, which then figures out that it has to shut down.
Questions: Is there a better way of doing this? Apparently openSUSE figures that we have multiple users logging into the gui desktop, so the gui is always kept running and a login window with the desktop manager option forces the user to login in. With autologin, this never happens, but no choice of desktop is possible on the fly.
Can some type of script be set up to painlessly enable this to happen? And what is the best way of bringing either the Gnome or KDE desktop manager down gracefully? I do get lots of error messages as the system attempts to recover and X shuts down. It appears that apparently the single user with autologin is left out in the cold.
I want to install a software called TinyOS which is an operating system designed for wireless sensor embedded networks in my account. The problem is it has instructions to install the software as an administrator since i'm not an admin of the department network i can not able to install. Is there any method to install this software as an user level rather than admin level.
View 3 Replies View RelatedI have a multiboot system with Windows Seven and Debian Squeeze installed.
When i run Windows, the fans in my PC work silently, but when i run Debian they making extremely terrible noise (looks like they working at full capacity).
I have 4 fans in my chasis, 1 CPU, 1 GPU and 1 PSU, 7 total.
How can I adjust the levels at which the battery is considered to be critically low?ight now it seems this is set at 5 or 10%. I want to make it 20 or 25%This is for Gnome. I am using Lucid x86
View 1 Replies View Relatedhello everyone, im having a problem when my computer enters in the run level 4 as the default when i start slackware. The strange thing is that it not seems that is a X window problem, it looks like more like a configuration problem in some part of the kde script to initialize the log in, because if i manually start the X service it works fine, i dont know what is the source. Thank you in advance for the help.
View 3 Replies View RelatedI want to know what are the advantages and disadvantages for accessing spi(serial peripheral inerface )from kernel level and user level. like methods of doing it, speed ,memeory utilization etc
View 1 Replies View RelatedHi Guys,
here is my scenario:
I am running F10 x86_64 with Nvidia Quadro FX 3400.
I installed the drivers and it worked just fine. No errors generated according to Nvidia log files.
However, while in run level 5 when I try to switch to run level 3 by typing "telinit 3" or "init 3" the X server goes down and I get a blank screen. Same thing happens when I try to switch to a different tty session by <ctrl>+<alt>+F2 (or any F key for that matter).
I also noticed that when I shut down my system I can't see any more the screen where services are shutting down and their status ([OK] or [failed]).
Would appreciate your help on solving this issue.
Hey Guys, I'am new here and request your help on this:
After installing emacs and a few dependencies on my RHEL 5, on restarting the system, the keyboard was not able to work. I restarted several times in vein.
However, when I start in single mode, it works perfectly. I have tried looking for a solution from google, but in vein.
Kindly help...
Regards, Andrew
I have a directory that has a another directory inside it. The top directory is rather redundant since it only contains the one other one. Is there a way to delete the top level directory and have the contents simply "move up a level"?
View 6 Replies View RelatedCan someone recommend a good app to monitor the OUTPUT of my soundcard? I don't just want to look at the VU meter of my music player - i actually want to see what the soundcard is outputting. Windows drivers for my soundcard (Audiophile 192) had this ability, but I'm not sure what software to use in Linux.
View 6 Replies View RelatedI just upgraded to the 10.04 and everything works just fine as before (except for skype but that really doesn't matters as it has already been 3 years I'm using ubuntu and I managed to get it to work only once, for miracle I believe ^^). The only real issue I have is this: when I start up my laptop, after the log-in, no sound will be heared as the "speaker" volume level in alsamixer is set to 0; if I raise it from the terminal running alsamixer (as I don't know any other alternative) everything plays just fine, but the next time I boot I do have to do it all over again... So, how can I change the default startup level of the "speaker" in alsamixer?
PS: by the way I do have the very same issue with the screen luminosity but the other way round as is always starts at maximum brightness and I can't manage to get it to start at the minimum, as it did before. At least reducing the backlight if far more quick but a couple of times I forget it and the battery lasted something like half an hour
Is there an ink level app that works with network printers? I am currently using Ubuntu Lucid x64 with a Canon MX860 printer that was installed using this tutorial: [URL]. Everything seems to work fine (it prints) but I cannot get any of the ink level apps to work (Mtink or Inkblot). After doing some research, my conclusion is those apps only work with USB connected printers. Is that true?
View 3 Replies View RelatedI would like be able to access packets coming off the network with the hopes of coding a primitive packet sniffer for learning purposes. I would also like to be able to piece together my own packets and send them out on my network. Eventually, I would also like to write a simple firewall so I want the capability to drop packets as well as let them pass. I assume I will have to access the kernel with some system calls to do this, any one have any information or resources that could help me on this project?
View 1 Replies View Relatedif there is support for Network Level Authentication.
View 1 Replies View RelatedI would like to run a script after I am sure that the network interfaces are up. I was thinking that this might be the end of init 3 or init 5.
View 9 Replies View Relatedi just upgrade my system (64 bit) form 11.2 to 11.3 (via zypper).Since the upgrade, suse boots only in text mode. I installed the ATI drivers (ATI Radeon HD4890), now i only see a backscreen after the suse bootscreen.The system seems to boot correctly. I'm able to connect normally to the fts-server which is running on the machine.I even can't boot in runlevel 3, when i try to enter the bootloader.
View 9 Replies View RelatedI actually have a problem with the keyboard config under Firefox.I'm unable to use 3rd level keyr under firefox, in any other apps the thrird level is working.The keayboard layout is set underkde with the setting toot.and 3rd level set as the "super key" (win key).the problem occur since I've upgrade from opensuse 11.2 to 11.3 with zypper dup (the upgrade as succes without any error) so with opensuse 11.3 KDE 4.4 firefox 3.6.6.With a similar setting under gentoo I don't have this problem nor with my own system base on LFS...
From there I suppose the problem come from a conflict between Suse keyboard handeling and firefox. However I don't know where to go from there.
If I set the level for headphone via Yast/Sound at 50% it is back to 100% after a reboot what gives Pulse-Audio vs. alsa ?I'm running a Dell latitude D830 and the card is 82801 H (ICH8 family) and the driver is snd-hda-intel.
View 3 Replies View Relatedin Kmail 2.0.89 and the 2 or 3 versions before that, I have been lost theability to make a new subfolder under the category "KMail_Folders". I canonly make sub-subfolder under any existent one.The Add Folder entry in the menu is greyed when I am in the KMail Folders
level.Is that a bug or a feature? (I hope is not the latter...)
Earlier this evening I suddenly had hundreds of "Bug Buddy" windows start popping up, which seemed to be stuck in an infinite loop. I rebooted to find myself stuck in run-level 3, due to multiple daemons unable to boot.I cant copy & paste the logs as I have no way to transfer them over to this PC.
Failed services in runlevel 5: earlyxdm xdm avahi-daemon network-remotefs Of course when ever I run 'startx' neither my mouse or keyboard works.I've finally joined the forums, pitty It's because of errors.
OpenSuse shows me this on boot:
Skipped Processes on run level 5 early xdm cifs nfs xdm
On my fresh installed 11.4: I boot the desktop entry in GRUB, and it's doing a fast boot. It loads INIT and switchs to runlevel 7. Then the comment:
Code: init: No more processes left
Or something like that. after a CTRL+ALT+DEL and a press on enter during the driver load, it all works fine. Is that just a standard fault, or should I do something? If so, what?
I have installed OpenSuse 11.4 as a Xen guest on a host system running SLES11 and it gets stuck just as it reaches run level 3. I can ping it and various network ports are open but the virtual text console is unresponsive and I cannot ssh to the machine. Port 10080 (Amanda backup) is also open but not functioning properly. The odd thing is that this problem happened when I first installed the guest and then went away only to reappear when I rebooted after installing the latest kernel via Online Update.
Here are the last few messages on the console:
Starting NFS client services: sm-notify idmapd..done
Mounting network file systems ...Starting rpc.statd .....done
..done
Starting sound driver..done
..done
Starting irqbalance ..done
Starting java.binfmt_misc ..done
Setting up (remotefs) network interfaces: .....
Here are the last few messages from ssh:
debug1: Authentications that can continue: publickey,keyboard-interactive,hostbased
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/bobv/.ssh/id_rsa
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug1: Authentication succeeded (publickey).
Authenticated to stafflinux ([134.219.205.140]:22)
debug1: channel 0: new [client-session]
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
Note that I have set RUN_PARALLEL="no" in /etc/sysconfig/boot
I have console=xvc0 as a kernel startup parameter. How I might debug this?
Does anyone know how to (permanently) get rid of this?
As you might have guessed, typing the root password and pressing OK has no effect.
This is NOT a laptop!
I don't get it, it worked on openSUSE 11.0 (I use 11.2 now, with Gnome environment). Same story on my laptop keyboard and the external USB Trust keyboard. It doesn't make any difference if I use any other layout: Serbian latin, Serbian cyrilic, USA, Croatian, Bosnian. Also it doesn't make any difference if I use alt, win, or the ctrl key for that. I need healthy keyboard. One strange thing, on one flash site (gojira-music), it does actually work in some way, with strange signs between, take a look: @�� .
View 2 Replies View RelatedI am trying to change the default screen resolution in Run Level 3 to 640x480. I have tried changing the menu.1st file and the vga=0x301 mode sticks until the system begins to boot and then resets to a higher resolution. This system does not have X, or Sax2 so no go on those options. This is OpenSuse 11.3 x64.
View 6 Replies View RelatedI played the apprentice sorcerer trying to install mysql workbench by my own and I messed up the system 11.1 by removing accidentally some libraries and decided to jump on 11.4 by using the update feature from the DVD. It worked all good (it seems at least: I didn't lost any datas and all my servers are running ok) but there is no more X11 server (kde) running for the run level 5.
I checked the inittab file and it is set to 5. I can log on root account and now I'm searching how to install kde on this new 11.4 system. I didn't yet tried the failsafe option at boot. Is there a way to set up kde from the internet, my wifi connection is ok ? I saw that yast was not installed nore zypper nore yum. Do I first try another update to fix it (if possible) from DVD?
I have a VM based on SUSE 11.3 that boots into a console in run level 3. I am used GNOME so I am trying to get it installed but not having any success. I don't know a lot about the VM as I got it 2nd hand.
So far I have gone into YAST and installed gdm and all the dependencies. I have changed from Run level 3 to 5.
When I run startx I get
xauth: creating new authority file /root/ /serverauth.15072
/etc/x11/xinit/xserverrc: line 56: exec: X: not found
giving up
xinit: No such file or directory (error2): unable to connect to X server
xinit: No such process (error3): Server error.
