Fedora :: Bugs In Client Computer Abort Entire Experiment
Feb 17, 2010
I set up an NFS server on my home computer, all very simple add a line to /etc/exports, run exportfs -a, all worked well and as expected. Through no fault with Fedora, bugs in the client computer made me abort the entire experiment. (long story that you don't want to know) Undo all the config, reboot. However I'm now left with an issue that's not earth shattering. Every time I reboot my computer a /Public directory is created in my home directory, this is obviously a legacy from the original NFS setup. I've trawled through log files, looked at config files in /var/lib/nfs, but can find nothing that might be generating this /Public directory at boot time.
View 14 Replies
ADVERTISEMENT
Jun 30, 2011
I find that the FC 15 Xfce spin will save the user's current session except that it doesn't save what is being done with the Lyx editor. Under FC 15 Gnome 3, I found that after I added the minimize-maximize-close buttons to the top of windows, that some of the windows in Lyx (such as the one that appears for View as DVIPS) didn't respond to those buttons. (I don't remember whether Gnome 3 saved the Lyx session and I've gotten rid of Gnome 3 now.)
View 1 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Jan 16, 2011
Can i move the entire HDD with the installed 64 xubuntu from one computer to another.
Will it be any problems ,i use the os system just to run my game servers.
Extra is lampp and some Databases ...
will it intsall drivers automacicaly .
I just want to know if its possible to do it ,
View 4 Replies
View Related
Apr 18, 2010
I start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
View 4 Replies
View Related
Jul 21, 2010
I am having a strange problem I've never encountered before. I have an Asus Eee S101 10.1" netbook with the 32GB SSD. I installed Ubuntu 10.04 Netbook Edition.
The other day, I was browsing with Firefox, when suddenly the entire computer came screeching to a halt. Had to power it down with the power button. After this happened, I have been unable to use the same Firefox profile I had been using. I had to start Firefox from the command line with the -ProfileManager switch, then create a new profile to keep browsing.
I wanted to completely get rid of the old profile, so from the Profile Manager I tried to delete the old one. Computer hung, had to reboot with the power switch. I then tried to browse to the .mozilla/firefox directory and delete the profile's directory there, from both Nautilus and the command line. Both times, the computer froze.
I tried a few more times, and the couple of times the computer didn't freeze, I got an error from the command line saying a Bash input/output error. After this error appeared, it would appear no matter what command I ran - I couldn't even run a sudo reboot now.
I can create/delete other files and directories, just not that Firefox profile.
View 8 Replies
View Related
Jan 13, 2010
My Ubuntu 9.10 is intalled on a partition on my computer HDD. The other partition OS is Windows XP. My Windows uses McAfee as the antiviral program. Granted that linux is at a much less risk for viruses, some still apparently can slide through on incoming emails from Windows computers.
1) Will my Windows partition McAfee protect the entire computer?
2) If not, suggestions for an anti-viral program?
View 6 Replies
View Related
Sep 6, 2010
I have quite some issues with Fedora 13 and don't know how to solve them. First of all may application crash always with the same notification
Code:
usr/bin/"the crashed ap" was killed by signal 11 (SIGSEGV)
When using yum I often get this
[code]....
View 6 Replies
View Related
Dec 11, 2010
I have a laptop that has both Windows 7 and Ubuntu installed on it. I want to install Debian alongside the other two OS'es in order to experiment with it.
View 1 Replies
View Related
Mar 20, 2010
i wanted to do a little experiment here by changing the default display manger to something like Firefox or GIMP or another program..Since "Display Manager is a program"
Quote:
gnome.org: GDM is the GNOME Display Manager, a graphical login program. i should be able to replace it by with any other program
[Code]...
View 5 Replies
View Related
Jul 5, 2011
i just upgraded from f14 to 15 the installation was successful but when i boot it bugs and dont start ...it stops here HTML Code:
Starting LSB : an anonymizing overlay network for tcp failed , see 'systemclt status tor.service' for details
Started lsb : install coredump handler wish saves segfault data
[code]....
View 7 Replies
View Related
Jan 16, 2010
My Automatic Bug Reporting Tool has been notifying me of bugs when closing Firefox and VLC. It does not say what to do with the bugs, or any other description thereof. It just gives the status that the bugs are not reported. What do I do with this, please?
View 10 Replies
View Related
Jun 30, 2010
I've been running Fedora since core 6, am on 13 now, always with KDE. I upgraded but also did fresh installs.I'm typing, in oo.org, Kile or Kate. Suddenly, without warning, the File menu is selected - mind you, without me clicking the mouse or pressing alt-F or anything. Just typing text.
Or how about this: I'm typing again. All of a sudden the direction changes from the normal left to right to the Hebrew right to left. I think I only pressed ctrl-s to save... Did I?
I can't reproduce any of it, although it seems to be related to Kate based editors and using alt-tab to switch windows. Like the alt key hangs digitally. Is it Linux, Fedora, KDE or Kate? (it can't be the computer, this has happened to me on several distinct machines) Where do I report this, to get a fix?
View 3 Replies
View Related
May 17, 2011
1.crash & warning showed as soon as dekstop was prepare ( note that i had not even installed f14...i was about too but this error drive me crazy and make me confuse ? )alright i got that , here is all u need ...gnome disk utility 2.32.0-1fc14reson process/usr/libexec/gdu-notification deamon was killed by signal 6(SIGABRT)crash count :11.crash & warning showed as soon as dekstop was preparegvfs crash 1.6.4-2,fc14reason process/usr/libexec/gvfs-gdu-volume monitor was killed by signal 6(sigabrt_crash count :2so now tell wheather i should install f14 frm this cd or make another ?
View 1 Replies
View Related
Jul 12, 2010
I want to experiment with Hydrogen, Rosegarden and other music apps it seems that jack is a useful program to do that. I have a standard install of Lucid. When I start Jack, it gives a message "suspending Pulseaudio The jack apps I am using have no sound. I assume that I need to set up an ALSA device to connect Jackd to? Is that correct?
[Note: I found these instructions for "running Pulseaudio on top of jack" [URL].. but they look more complicated than I need. I'm only using jack a little each day so I am fine with turning off Pulse during those times.]
What is the simplest way to get sound out of Jack apps? If it is to set up an ALSA device, how do I do that without interfering with Pulse which will be running the other 90% of the time? Or am I totally misunderstanding the setup?
View 3 Replies
View Related
Feb 28, 2011
I am learning about linux memory and hugepages, and know that hugepages basically is just memory that manages memory. I thought I'd experiment with the subject, and wrote a very small C program [URL] that basically just eats 20 GB of memory. The idea was that I would use this small C program to see how big the page table would get when handling large areas of memory when I'm not using hugepages. After running the program on my RHEL 5 server I was expecting the PageTable to be huge, but found that it was only about 43 MB. The page size on my RHEL box i 4 kB. Why I'm not getting the major PageTable size issue I was expecting?
View 2 Replies
View Related
Feb 11, 2011
I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]
View 6 Replies
View Related
Sep 19, 2010
i want to know, how create softlink in client (host) computer.
View 2 Replies
View Related
Apr 20, 2010
Is there a way I can install a windows program to webspace and run it from a linux client computer? To specify, I'm a student at the University of Minnesota. I have access to linux machines running Ubuntu, however, the space allocated to us is too small for the program I would like to run on these computers. I do have webspace I can use though. The thing I'd like to be running on the linux computers is a windows application requiring installation. So is there a way to put/install/(whatever else it might be called) this program onto my webspace and be able to run it from the linux computers? I know it's probably unlikely, but maybe?
View 4 Replies
View Related
Nov 25, 2009
Is there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies
View Related
Mar 24, 2011
I notice that my bittorrent client is capable of automatically setting up port forwards with my router, and I want to know if I can do the same in a shell script. The reason is, that since my router is stupid and won't let me keep static IP addresses (it seems they forced a DHCP refresh every week to make me want to pay for a more expensive model which doesn't), I need to get my computer to change the port forward to follow my computer's changing internal network IP address. I have a couple of port forward manually entered into my router settings for web interfaces to bittorrent etc, but of course these have a good chance of being invalidated at each DHCP refresh cycle.
View 1 Replies
View Related
Apr 7, 2010
Is there any way to back out of and upgrade that is not going well, The original OS is still operable but of course synaptic wants the upgrade to continue. The upgrade stalled after packages were downloaded and about 45 to 90 seconds into the install/upgrade. Is there a way to convince synaptic to abort the upgrade?
View 3 Replies
View Related
Jun 23, 2010
I just recently installed RT Tracker 3.8.8 on a Centos 5 VM install. I've been running 3.6.6 for more than a year now with no issues. But I'm having some serious slowness issues with 3.8.8. When I start the httpd service at least one of the processors go straight to 100%. It also tends to do this when you browse to it for the first time. I've been trying to figure out the problem, but I can't get a grip on this one. This error pop's up in the /var/log/messages log:
Jun 22 11:03:56 helpdesk RT: Apache2::RequestIO::rflush: (103) Software caused connection abort at /usr/lib/perl5/site_perl/5.8.8/HTML/Mason/ApacheHandler.pm line 1020 (/opt/rt3/bin/webmux.pl:79)
View 1 Replies
View Related
Nov 13, 2009
While attempting to install CentOS 5.4 x86_64 from DVD (downloaded torrent), I encountered a fatal error that aborted the install and dumped a bunch of log files. I attempted this a couple of times resulting in the same error. I tested my hardware via CentOS 5.4 x86_64 live cd without exception. Here is my install configuration:
1)Booted to DVD
2)Skipped media test
3)English (English)
4)U.S. English
[Code]....
View 8 Replies
View Related
Dec 14, 2010
System gets corrupted when I abort a kickstart installationI have a simple kickstart installation of CentOS 5.5 (same issue on 5.3)The only user interaction is the partitioning screen.if, in my cfg file, I state :-
# Partition clearing information
clearpart --all --initlabel
or
[code]....
View 5 Replies
View Related
May 1, 2010
I'm at the end of my rope here, and am extremely frustrated. I have a web server running on Ubuntu Server and am using OpenSSH for all my SSH and sftp needs. However, I have the strangest of all situations that I cannot for the life of me figure out.
I have a user chrooted to /var/www/username in /etc/ssh/sshd_config and in /etc/passwd. When the user is chrooted to that folder, whenever I try to log in through SFTP using any client, I get an error saying "Network error: Software caused connection abort." The kicker is, when I chroot the user to /var/www that user can log in just fine. I've tried changing every chmod and chown setting I can think of, and I have NO idea why it matters by one folder.
I had the jail working perfectly for about 2 hours, when it seemingly just decided to stop.What's really getting to me is why the two folders, which have the exact same settings, are not operating the same way.
View 4 Replies
View Related
Feb 7, 2011
I am using nx client and I would like to ask your help. Is it possible when I connect from home to my work's computer (using nx client) to see the exactly same desktop-taskbar and open programs as I left them in my work computer.
Imagine that you are at work using your computer. You lock the keyboard and you go home(you didn't turn it off). You go home and you login to work's computer. What I want to see is the same if I was just unlocking works's computer. IS that possible and how?
View 9 Replies
View Related
Oct 29, 2010
I have a hdd with several partitions.
sda1 - Fedora
sda2 - windows xp
sda3 - win 7
sda4 - ubuntu
I know how to mount each partition, but what I want is to mount sda, not sda1 or sda3. Just sda.So later, I want to make a copy of MBR of sda.As I know first 512 bytes from sda1 are not the same like first 512 bytes from sda.Thats why I want to mount sda and with dd, copy the first 512 bytes.The problem is how to mount sda, if some partition are ntfs and other are ext3?
View 2 Replies
View Related
Feb 10, 2010
I am running centos 5.4, kernel 2.6.18. Also running httpd (apache2) as a reverse proxy with the following modules
mod_ssl
mod_cache
mod_proxy_*
Recently after updating these modules:
mod_ssl x86_64 1:2.2.3-31.el5.centos.2
httpd x86_64 2.2.3-31.el5.centos.2
distcache x86_64 1.4.5-14.1
I am getting wierd errors in the error logs:
[Wed Feb 10 15:44:18 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:45 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data
[Wed Feb 10 15:44:48 2010] [error] (103)Software caused connection abort: cache: error returned while trying to return disk cached data .....
View 1 Replies
View Related
Jul 28, 2010
is there a way to actually download the entire fedora repo? i've a friend with dialup who cannot install big things and i want to just downlaod the repository for him. i know ubuntu has some sort of way of doing this. i tried the following:
Code:
sudo yum --downloadonly --downladdir=~/fedora_repo install *.i?86
but this seems to, aside from all sorts of conflicting packages only get the things i dont have installed.
View 2 Replies
View Related
