Fedora :: Yum Update Killed Computer / What To Do?
Jun 10, 2011
I have F15 64 on my laptop, it's been running relatively well, today I decided to do a yum update. There were about 20 updates, nothing major from what I saw, NetworkManger stuff etc. Everything goes well, until the end when I get some error (no I don't recall what it was, yes I should've written it down, and no I don't need a lecture about this) so I manually reboot the computer. And I boot to a black screen, Oh what joy of using Fedora. I edit grub to try and get in with runlevel 3, but encounter an error "Kernel Panic - not syncing: Attempted to kill init" then a few lines down it's "panic occured, switching back to text console /sbin/init:error while loading shared libraries /lib64.libgcc_s.so.1: invalid ELF header"
I'm very frustrated, this comes right on the heels of pre upgrade forcing me to do a complete fresh install of F15. I'm honestly one error away from moving to another distro (Fedora is my first)
View 14 Replies
ADVERTISEMENT
Mar 24, 2010
I ran update on my ASUS N51Vf laptop yesterday and among the updates there was one for udev. After installing it udev refuses to start at all saying: "iTCO_wdt: unexpected close, not stopping watchdog". Then I get to login but not for long: after several seconds either system reboots instantly or it hangs shutting down display. Is there any way to rollback udev update somehow considering I can't even login into system?
View 5 Replies
View Related
Jul 19, 2011
I recently updated my Nvidia driver and since don't have a gui. When my pc loads it just gives me a list of the start up commands.
View 3 Replies
View Related
Mar 24, 2010
I am experiencing the "slow internet" problem (mentioned multiple times in these forums) but it started exactly when I ran an online update, which switched my boot image from vmlinuz-2.6.31.12-0.1 to vmlinuz-2.6.31.12-0.2. Perhaps a setting somewhere got overridden? When the update occurred, grub couldn't find the OS because it had the wrong version #, and I manually edited it (via a livedisk) and that fixed it; it also switched my vga resolution in the grub conf. OpenSUSE is *acting* like ipv6 is enabled again, but ifconfig doesn't report that, and my MTU is close to 1500.
View 6 Replies
View Related
Jul 24, 2010
A kernel update just killed my ATI graphics driver.
Trying to install proprietary graphics driver fails and points at /var/log/jockey.log
This ends with
Code:
If I can't sort this out I'll have to try rebooting into the old kernel to get the graphics driver back. The dreadfully slow scrolling in the browser is starting.
View 5 Replies
View Related
Sep 24, 2015
Root LUKS to be broken by apt-get update? This did happen to me on 3 different laptops, both on previous install (from Debian 8.0), and also on clean installs (Debian 8.1), repeatedly.
When I reboot, grub starts, but then it cannot find the root file system (I end up with the emergency console).
Code: Select allLoading Linux 3.16.0-4-amd64 ...
Loading initial ramdisk ...
Loading, please wait...
[many seconds waiting]
ALERT! /dev/mapper/sda2_crypt does not exists.
modprobe: modprobe ehci-orion not found in modules.dep
This is the most simple, clean, conservative install ever, no closed driver.
But LUKS on the root file system:
Code: Select allone ext4 partition on /boot
one ext4 partition on / (trough LUKS, all defaults)
There is no LVM.
All the 3 laptops killed at different time, when updating. Clean install is fine until the first update.
Booting on the rescue system allows me to see everything.
Code: Select all$ update-grub
Generating grub configuration file ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-3.16.0-4-amd64
Found initrd image: /boot/initrd.img-3.16.0-4-amd64
No volume groups found
How can I recover from this?
View 5 Replies
View Related
May 17, 2010
I updated today and naturally removed the old nVidia driver, compiled it again after a reboot, and then rebooted again for good measure. I can log into KDE4, but all I get is a cursor and a solid black background. I deleted the ~/.kde, ~/.local, and quite a few other directories from my normal user account using the shell so KDE would reconfigure my settings when I logged in again, but it's the same problem. I went into ~/.kde/share/config/kwinrc and added the "Compositing" section with "Enabled=false" to rule out compositing. Now when I log into the system I get the default KDE4 wallpaper and a mouse cursor, but nothing else. I believe the latest update broke KDE4, or am I missing something? I have recreated my xorg.conf as well, and only set it to use the nVidia driver. So what can I do now?
View 3 Replies
View Related
Jun 1, 2010
I have been having problems with Squeeze last day or so, but thought would do all system updates available in hope this would stop the system crashes only to find that upon reboot my dock of choice, Cairo-Dock, which is set to auto start puts a message on screen saying it has no plugins available and that it will not run as a result. And it just won`t run. The update included updates for Cairo Dock and it`s plugins, which it seems have all updated correctly and package manager says every available plugin IS installed as it was before, what I can do to correct this annoying issue?
[Code]....
View 4 Replies
View Related
Jan 7, 2010
I have a serious problem on my VPS. I ran "yum update" and then hit the Ctrl+C to cancel when I realized that I need to specify a package to update, not all of them, but when the console returned suddenly I lost the connection, when I try to reconnect to the machine, it says /bin/bash not found !! even when I try to issue commands from the VPS control panel, it reports that the commands are not there
I can issue a ticket for the ISP to resolve this, but I need to know the risks before I do this, I have no backup on MySQL and 2 live web applications, although they are still running, I am afraid if I restarted the VPS everything will be gone.
View 7 Replies
View Related
Jul 5, 2011
AMD 64 Upgrade to testing last night killed my internet connection. The lan works, I can ping the dns server from my IP, however no mail, browser possible. Is something in testing broken again?
View 5 Replies
View Related
Jan 30, 2010
I've been connecting to the Internet via Ubuntu 8.10 on my Toshiba laptop fine for ages now, but today it has stopped working. Yesterday an update came through relating to DHCP and, like all other updates, I installed it. And now my laptop can see the wireless router but it cannot connect to the Internet. (As I always install the recommended Ubuntu updates I didn't look closely at exactly what the update said, but I did see DHCP in the title, so this is why I suspect my connection is now broken.) Or can anyone tell me how to undo yesterday's update? I really wish now that Ubuntu had a utility similar to Windows System Restore.
View 2 Replies
View Related
Feb 25, 2010
Some data:Attached because on posting I get an error even though there is not a singel image or smiley:You have included 11 images in your message. You are limited to using 8 images so please go back and correct the problem and then continue again. Images include use of smilies, the BB code [img] tag and HTML <img> tags. The use of these is all subject to them being enabled by the administrator.Couldn't upload either it gives invalid file so I resort to Google docs now [URL]
View 9 Replies
View Related
Jan 27, 2011
The latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
View 9 Replies
View Related
Nov 23, 2010
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
View 1 Replies
View Related
Sep 6, 2010
Some days ago (Sep 2?) I did a 'yum update' on a F13 64bit computer. Since then I don't get a logon screen when booting. The computer doesn't respond to CTRL-ALT-F2 but I can login over ssh.
CAPS-LOCK and NUM-LOCK don't work on the local keyboard and moving the mouse has no effect either. When looking in dmesg I see following line:
INFO: task Xorg:1850 blocked for more than 120 seconds.
Xorg.0.log attached.
I didn't touch xorg.conf when this happened.
View 8 Replies
View Related
May 13, 2011
Dual Boot Win XP Pro with Fedora 14 32 bit All ok til update today which included a new Kernel hence asked to reboot On reboot get to following message with no menu to access either Fedora or Windows
Quote:
GNU GRUB version 0.97 ( 638K lower / 3406528K upper memory ) [Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device /filename.] grub> _ (flashing cursor)
View 4 Replies
View Related
Feb 12, 2010
Wednesday I went to work, docked and fired up my older Dell C840 laptop (running Fedora 12). It had a long list of updates that it downloaded and installed (it had been off for about a week). When the updates were finished, I noticed that my laptop had locked up. After waiting a while, I ended up doing a cold reboot. After that, I get the Fedora symbol that fills up, and then the screen goes black with a single cursor. You can type in anything and it is reflected- even control and ALT codes. If you hit CTL- ALT-F2, it goes into a terminal mode. You can do almost anything that you'd normally do in terminal mode. The video driver is the original off the install disk, and it's never been changed- it works fine right out of the box.
If I try to start up X-Windows, I get a segmentation fault error. I've tried deleting and then re-installing some of the packages that were updated (trying this via yum), no difference. I don't know what else to do. I need to get this laptop going before next week- it's my work computer and I do use it a lot. Is there any way to get in touch with the people who wrote the updates, and file a bug report? I'm using my main (home) system right now, that for a couple of reasons needs to stay on windoze XP for a few more weeks. I've been around computers for years, but not Linux.
View 1 Replies
View Related
Jul 21, 2010
Just finished a security update, (Fedora 12) and it said I had to restart the computer to have it take effect. When I restarted, all I got was the "Compaq" logo....forever. No Grub2 (it's a three system set up), no bios, just the brand name of the box. Even worse, when I tried going at it with a live cd, the same thing; the bios never loads, so no live cd fix.
View 6 Replies
View Related
Sep 1, 2010
After the last update this morning, which involved, among other things, the updated version of the linux kernel, upon rebooting, the computer froze at the fedora logo.
View 14 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Mar 31, 2010
i have a healthy and fully operational mobile broadband connection yet i cannot update my Ubuntu 9.10 computer. every time i try to update i receive an error message with the title: "could not download all repository indexes", the information the dialog box contains is as follows
GPG error: http://flomertens.keo.in edgy Release: The following signatures were invalid: NODATA 1 NODATA 2GPG error: http://ntfs-3g.sitesweetsite.info edgy Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://flomertens.keo.in/ubuntu/dist...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
[code]....
View 3 Replies
View Related
Dec 27, 2009
I had screenlets working Just Fine on F 10, but it hit EOL so I used preupgrade to move to F 11. Now, I can't get them working no matter what I do. If I try to run screenlets-manager from a terminal I get this message:
Traceback (most recent call last):
File "/usr/share/screenlets-manager/screenlets-manager.py", line 28, in <module>
import screenlets
ImportError: No module named screenlets
And, I can't reinstall them because they require python-dateutil which doesn't seem to have a version for F 11. I even tried downloading the tarball and running setup.py, but it crashed because it tries to import a module that doesn't exist.
View 2 Replies
View Related
Feb 25, 2010
Earlier today I was simply on my laptop watching videos, I finish, shut my PC down. I reboot hours later only to get greeted by the Fedora Boot Splash Screen and shortly after nothing but blackness, no login screen or nothing, I see the mouse cursor shortly after the boot splash for 2 seconds then it disappears. I made no recent changes to any files besides applying some updates via the package manager, I had to recently reformat due to a self-blunder and lost crucial data, now a week has passed and I've managed to "rebuild" my data loss back up. Now this is hindering my college course work which is done online.
View 9 Replies
View Related
Aug 4, 2011
I had F15 installed in my hard drive, I liked it very much and everything was going great until I installed that damned XP in another partition (same HDD). Now here is the problem.
This XP does not let me choose the OS I wish to run at the boot-time and just boots itself. I am a beginner with Linux OS.
View 2 Replies
View Related
Jan 22, 2010
I am using fedora 9. I have installed cell SDK 3.0. when i run any program on that simulator i get 'killed by signal 7' error.
View 1 Replies
View Related
Nov 22, 2009
While doing some basic tweaks, nautilus, panel, display etc I got a pop-up: Additional Firmware Required "to make hardware in this computer function correctly". No more detail than that. Like signing a blank check so I said "go for it". When I rebooted the display was hosed. Like the refresh rate was wrong. So off to xorg.conf to fix it. There is no xorg.conf. After four hours of searching forums and google I gave up and reinstalled (only an hour). This time I made a backup (cp -a) before letting F12 fix the non-existent problem. Tried again very carefully to be sure that what killed the display was the additional firmware. True. That kills my display. Only problem is the backup cp -a when copied back in would boot but would not let me log in!? I could boot "single" change the password, but it said that was already the password.
for me F12 is a "one-day-distro". I have multiple partitions with Ubuntu, Mandriva, SuSE, Slitaz ... My first Linux was Fedora Core 4 and I will try the next Fedora release. For now back to Ubuntu 9.04. I'm still testing 9.10. My graphics is on-board Intel. I think it's 965G chipset. This is a Dell E520N. How would I tell what not to do that firmware addition?
View 6 Replies
View Related
May 31, 2009
so, i have 2 23" 1920X1080p monitors they were working fine, but i just didn't have the 3d support i needed to play some games that i enjoy. So... i tried installing the kmod-nvidia and the xorg x11 libraries that all of the other forums told me to do. then i restarted and now only one screen is working, at 1280X1024, it's "unknown" and i haven't a CLUE what to do here
View 9 Replies
View Related
Feb 4, 2010
Last night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).
Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?
[Code]...
View 2 Replies
View Related
Mar 10, 2010
I Just clicked on the Desktop Effects menu item and the system rebooted and now I can only log in through a tty. I have to use "startx" to get X to start up then I seem to have no file manager.
It seems Desktop Effects and my nvidia driver don't play well.
Here are the xsession-errors
PHP Code:
I noticed this in the messages log
PHP Code:
View 2 Replies
View Related
