Fedora :: Unable To Open Login Screen
Oct 14, 2009
I clean-installed Fedora 11 and everything was running well. I wanted to try Bacula backup program and so I installed the Development package in other to compile Bacula. When I finished the installation, I discovered a bunch of foreign language supports had been installed. I just erased them. While doing so, I must have also erased some other files.
When I rebooted, the bootup process went well until just before the login screen. The screen showed the Fedora logo, f, and got stock there. I was able to login remotely from another local network computer via vncviewer. I found that GNOME dsktop was missing. I logged on to Fedora 11 text mode by issuing CTL+ATL+F3 and did 'yum groupinstall "GNOME Desktop Environment" By remote login from another computer, I determined that the GNOME Desktop had been restored. But the Fedora 11 still stil stuck just before the login screen. What do you think is missing? What do I need to reinstall?
View 3 Replies
ADVERTISEMENT
Oct 10, 2010
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
View 1 Replies
View Related
May 31, 2011
I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
View 5 Replies
View Related
Feb 25, 2011
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies
View Related
Oct 14, 2010
I'm the only one using this pc, so I want to enable automatic login. When I open the "login screen settings" though, it's greyed out (inactive) and the "unlock" doesn't do anything.
I also have something about "keyring" asking my password each time just after login, which isn't pleasant.
View 9 Replies
View Related
Mar 8, 2011
Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies
View Related
Feb 17, 2010
I have done a clean intall of Ubuntu 9.10 (K. Koala). Got everything up and working with 2 users, me with full privelleges and my son with a ltd account. Everything was working well so I moved the PC to my sons room, connected it to his TV and was able to log in as both users.
I changed the display settings on his account as when using the 1360 x 768 (16:9) setting the top bar and the last icons on the screen weren't visable, the desktop also started about 2inches from the left hand side of the screen, so changed them to 800 x 600 and whole desktop visable.
I switched user and did the same to my desktop. Then switched the pc off. I come back to it now, boot it up, get to the user/password screen, select me and enter my password, the screen flickers, little Ubuntu drum roll, and I return to the login screen. So I try my sons login, same result. No password authenticaion message, so I guess this isn't the issue. Surley just changing display settings can't have this effect?
View 1 Replies
View Related
May 5, 2010
I recently upgraded to Ubuntu 10.04 LTS and at first, everything was just fine. This issue came about yesterday, as far as I know, while my screen was locked. The login screen now displays only half of the original login screen (left side) and the other half (right side) is an odd view of a black background with a white box in the center (see this mock up). Another note of interest is that the right side pans as I move the mouse around the screen, as if the right-side view were a second view port to the login screen without displaying it properly.
I am not able to log in whatsoever. An incorrect password results in the standard error message. A correct password results in a temporary black screen, as if to load to the desktop, but then redisplays the login screen as if I hadn't logged in at all. I'm not sure where to begin, as I cannot login to run any commands and the grub menu does not give options to start in safe mode--it just loads directly to the latest instance of Ubuntu.
View 9 Replies
View Related
May 20, 2010
Command '/usr/bin/kcmshell4 kdm --lang en_US' not found
View 9 Replies
View Related
Jan 17, 2011
I may be a beginner to Ubuntu 10.10, but I'm fairly certain that this is weird: I have had no trouble logging into my Ubuntu 10.10 netbook until this morning. Now I am unable to get past the login screen. It says that there is an Authentication Failure, which is bogus. Not only should the password work, but it does in the Terminal. I am able to login to the terminal and gain root access.
I can even change my unix password, but no matter what I try I can't get to my desktop. I did run into a major issue with a frozen program. Rather than reboot, I tried to close it using the kill command. What ended up happening was that all that remained was my wallpaper, probably a bad move on my part, but I'm a rookie. I think I killed all running applications. This happened last night... so probably related.
View 2 Replies
View Related
Sep 1, 2010
here is Maneesh Kumar Dhiman from india persuing B.Tech in computer science and Engg. i am using ubuntu 9.04 and i have the problem with it that i cannot being able to update it by following ways:
1. by using snaptic package manager
2.by using update manager
3.by terminal commands and also i have a problem with U9.04 n that is i can not being able to login from user screen as a root.
View 2 Replies
View Related
Aug 9, 2010
As of this morning I cannot open pdf's by clicking on them in firefox. I can download them and open them from the download window or even from the folder they are saved to, but not from the browser. Evince opens and says: Unable to open document Error opening file: No such file or directory.
View 1 Replies
View Related
Aug 27, 2010
I have a VNC connection running to my Ubuntu 10.04 server [URL]. This was running fine for a day or 2 after that, sometimes it worked and sometimes not. When it didn't work, I could connect with VNC (i got a gray window with the cursor) but no login screen was shown.
After some testing I now know what the root cause is. When I disconnect the screen from my server, I don't get the login screen. When I connect the screen (even if it is not powered) after a reboot, I can see the login screen. Next I was looking for some logging that could indicate some problems. I looked into "/var/log/Xorg.0.log" and there I see a difference when I connect/disconnect the screen. When the screen is disconnected, the log says:
Code:
(II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
(--) intel(0): Chipset: "Pineview G"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID for output VGA1
[code]....
View 3 Replies
View Related
Mar 10, 2010
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
View 5 Replies
View Related
Mar 7, 2011
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
View 1 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Jan 22, 2010
How an I tell gnome (using a script or setting in compiz settings)to only open application X on screen 1 and have it work from screen 0? example: I have nvidia dual/seperate screens runnig so I have screen 0 and screen 1 I cannot drag a window from one screen to the other I want to launch a program from screen 0 and have it open on screen 1
View 4 Replies
View Related
Sep 18, 2009
I would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
[Code].....
View 4 Replies
View Related
Sep 17, 2010
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
View 2 Replies
View Related
Dec 22, 2008
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies
View Related
Sep 14, 2009
I am having trouble with the login screen. After I enter my password and click login, I hear the opening chime in fedora, then my keboard lights flash on and off and my screen goes blank for a minute, almost like the machine is rebooting, then goes right back to the login screen. Sometimes I have to do this 5-8 times before I finally get into the desktop, other times it works the first time.
View 12 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Nov 10, 2009
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
View 8 Replies
View Related
Feb 1, 2010
Just installed Fedora 12 on a P4 IBM. Everything installed fine. Then, I rebooted, installed updates, and installed a few simple programs (emacs, ssh server). I rebooted since some kernel updates had been made. I can't login anymore. I get a brief message at GDM that says "unable to open session" after I enter my password. Root also doesn't work, but I figured out that root logins are disabled. I found something that recommended disabling selinux, so I reboot with selinux=0 parameter. That still didn't fix the problem, but did initiate selinux to re-label everything on the next boot.
My next thought was that maybe my password got corrupted, so I went into single usermode. I ran passwd justin, so I know that my password is correct. I still can't login via GDM or on a tty.
EDIT: I was also thinking I might need to uninstall something that I did; however, networking is disabled in single usermode, and if I init 3, then I get a login prompt that I can't open. Is there a way that I can enable root login? That might be a starting point to see if it's my user account or a general login problem.
View 4 Replies
View Related
Jul 17, 2010
i am trying to open shared pdfs through samba with Adobe Acrobat but nothing seems to happen with evince i cant open shared pdfs successfully in windows i can open the shared pdfs with Acrobat successfully
Code:
[root@ng AdobeReader]# rpm -qa|grep -i samba
samba-client-3.0.33-0.fc8
samba-common-3.0.33-0.fc8
Code:
[root@ng AdobeReader]# acroread -v
9.3.3
View 3 Replies
View Related
Sep 11, 2010
I Made a fresh Installation of Fedora 13. It shows VolGroup00 and File System in the Computer on desktop.
The size of the hardisk is 160gb. The file system shows some 4gb. I'm not able to open the Volgroup00. On double clicking it it shoes the error "Unable to mount location"
on entering fdisk -l,
It says the partiton one /dev/sda1 did not end on cylinder boundary.
The partition /dev/sda1 ends on Cylinder 63 and the emaing LVM partition also starts on Cylinder 63.
I tried reinstallling after dropping both the partiotions 4 times, but this is always the case.
View 10 Replies
View Related
Jun 30, 2011
I'm trying to disable the firewall in an attempt to get my computer to see my other computer connected to the router. However I'm unable to get the firewall app to open. Here's the error in the attachment. It just says a float is required. My only options are to redo, which keeps the same error coming back, or to quit which closes the whole thing.
View 1 Replies
View Related
Mar 10, 2009
I have seen the option call login window in ubuntu versions so how can i change my login screen in fedora 10
View 14 Replies
View Related
Apr 16, 2009
I want to change the login screen in Fedora 10. I know in previous versions gdm manager or something like that was used to change this. I have a theme file that I downloaded from Gnome-look, but I can't use it in Fedora 10 because gdm wasn't included in 10 or something?How can I sort this, and does anyone know if gdm is making a return in Fedora 11?
View 13 Replies
View Related
Jul 15, 2009
I'm running Fedora 10, it seems to boot normally, but the login screen never appears. all it shows is the cursor with the blue circles running around it, meaning its working on something. I let it sit for about 10 minutes and still no login screen.
View 8 Replies
View Related
