I don't need to be advised if a printer job failed on my screen. I am sitting beside the printer. I know someone needs that feature but how do I turn it off.What software is responsible for putting a printer icon up and then giving me this output? And will that software accept a request to change the default behavior?
View 3 RepliesI have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
Could someone try [URL]and then take vid and open that in whole screen. Since is it this machine why I got blank if I am try to expand it to fill screen.
View 5 Replies View RelatedI'd like to create by remote acces a popup on a desktop (my brother) to remind him for some things, even when I am far away and he's offline but I know his PC is running. I have ssh access to his PC anytime. So I just need to figure out how I can manage to get zenity to catch the ocrrect display or a usefull leightweight alternative which doesn't require any bigdeal setup.
View 2 Replies View RelatedI select my location and 'Save' it, this damn thing continues to pop-up, either on the same Search, or when a new search is made.I hoped Adblock Plus would stop it but it doesn't detect it automatically and trying to do it manually doesn't work either.I was sure that there would be a plugin for this but there seems to be no mention of the problem in eBay-related plugins.Opera used to do this occasionally as well, so it's not confined to Firefox.
View 6 Replies View RelatedI have a strange issue w/ F11 and atheros 5212 wifi card using the standard ath5k driver. Every now and then (usually upon bootup but it will kick in every now and then, no rhyme or reason) I will get a kernel panic whereupon my wifi disconnects and I have to manually reconnect. The password screen will popup and I just hit OK and it reconnects. there also appears to be a dmesg line 'disassociated by local choice (reason=3)' in addition to the kernel panic. I've tried using ath9k instead (rmmod ath5k, modprobe ath9k) but that doesn't work at all, no wifi shows up in networkmanager. I also tried to find madwifi and kmod-madwifi via yum but those packages do not appear to be there for F11.
View 2 Replies View Relateddoes anyone know a way to disable those annoying NM 0.7.1 popup balloons in F11 (KDE)? The ones that say that it is now connected to the wired eth0 network for example? I would really like to get rid of those ugly GTK notifications in KDE, but the NM GUI doesn't seem to have an option for this?!
View 2 Replies View Related[URL] and then take vid and open that in whole screen. Since is it this machine why I got blank if I am try to expand it to fill screen.
View 2 Replies View RelatedI've been having problems with pdf files made using latex (dvi->ps->pdf). I found a reported bug in bugzilla by searching the error message and made a comment. The 'problem' is that the bug is filed under evince, but I'm pretty sure it is in ghostscript. Should I file another bug in the ghostscript section, or will the clever people at bugzilla work it out once they get round to this particular bug (it's marked as low priority)?
The bug report can be found here[URL]..The bug is more annoying than anything else, so any advice is welcome.
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
I finnaly put my hand on a mini-itx board with the AMD E-350 2 cores Zacate CPU with ASROCK E350M1 E350 A50M R with 4 GB ram. I installed fedora 14 64 bits first, than 32 bits lastly and in both case, linux fedora 14 reported only 2.6GB of my 4GB ram. On the bios, I read 4096MB with 384MB shared.
I booted a cd with memtest86 V4.20, and it reported 3709MB of ram, that seems ok. under linux fedora 14: free -m, show: 2637MB, under monitor, we can read, 2.6GiB
Is is possible to create a report which contains every Disk usage status, Exim mail q , and etc and generate it into the excel files monthly.
View 4 Replies View RelatedI don't know what bugzilla wants to know. I tried to create a new report, but I failed at the first page/question. THe page ask me to enter a classification. But I don't know want that could be. I check multible times but I got always just a big red EM. What's to enter at 'named tag' and at 'to bugs'?
View 4 Replies View RelatedI've been running Fedora since core 6, am on 13 now, always with KDE. I upgraded but also did fresh installs.I'm typing, in oo.org, Kile or Kate. Suddenly, without warning, the File menu is selected - mind you, without me clicking the mouse or pressing alt-F or anything. Just typing text.
Or how about this: I'm typing again. All of a sudden the direction changes from the normal left to right to the Hebrew right to left. I think I only pressed ctrl-s to save... Did I?
I can't reproduce any of it, although it seems to be related to Kate based editors and using alt-tab to switch windows. Like the alt key hangs digitally. Is it Linux, Fedora, KDE or Kate? (it can't be the computer, this has happened to me on several distinct machines) Where do I report this, to get a fix?
when i am prompted to send a bug report i am given two choices. either i ll use bugzilla or logger. which one should i be using?
View 2 Replies View Relatedjust installed Fedora 13 on a pentium 4 laptop by Dell, with 1 Gb RAM.
As I opt for Compiz, it cannot start, there is a black pop up saying Crash, and some numbers follow. How can this be fixed?
Should I install KDE?
Is there an update of software?
I can opt for Compiz but worry that it will be faulty. That is the second attempt also produced the crash warning pop up but gave me the option of keeping it or going back after about twenty seconds, with the figures on the screen. I played it safe. Also can I try it, and manually go back?
Error report shows Compiz killed by Signal 11 SIGSEGV, this was added after post 9.
have a script that will report whenever a file is copied? Some useful information would be the time/date, user, and destination whenever a file is copied. I've looked into the stat command, but it does not distinguish between copy and access.
View 4 Replies View RelatedI coundn't log in fedora anymore. Everytime i try, i receive the report "unable to open session".
View 6 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedAfter running
Code:
nessus-fetch --register <Activation Code>
I got
Code:
nessus-update-plugins could not be found in your $PATH
When I try to run a scan on localhost I get the message "nessusd returned an empty report".
Here's the entry in nessusd.messages
Code:
[Mon May 25 00:30:03 2009][13188] user mickey.harvey : testing 127.0.0.1 (127.0.0.1) [13189]
[Mon May 25 00:30:04 2009][13189] Finished testing 127.0.0.1. Time : 0.03 secs
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : test complete
[Mon May 25 00:30:04 2009][13188] Total time to scan all hosts : 1 seconds
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : Kept alive connection
I would like to get the scan working and make sure that nessus is updating the plugins. I have been looking though the nessus documentation and tried searching on Goggle without any success.
I've been trying to make sense out of this error report. I get it every once in a while on startup of my machine.
Code:
Summary:
SELinux is preventing /usr/sbin/ntpd access to a leaked netlink_route_socket
file descriptor.
Detailed Description:
[ntpd has a permissive type (ntpd_t). This access was not denied.]
SELinux denied access requested by the ntpd command. It looks like this is either a leaked descriptor or ntpd output was redirected to a file it is not allowed to access. Leaks usually can be ignored since SELinux is just closing the leak and reporting the error. The application does not use the descriptor, so it will run properly. If this is a redirection, you will not get output in the netlink_route_socket. You should generate a bugzilla on selinux-policy, and it will get routed to the appropriate package. You can safely ignore this avc.
Allowing Access:
You can generate a local policy module to allow this access - see FAQ [URL]
Additional Information:
Source Context system_u:system_r:ntpd_t:s0
Target Context system_u:system_r:firstboot_t:s0
Target Objects netlink_route_socket [ netlink_route_socket ]
Source ntpd
Source Path /usr/sbin/ntpd
Port <Unknown>
Host localhost.localdomain
Source RPM Packages ntp-4.2.6p2-7.fc14
Target RPM Packages
Policy RPM selinux-policy-3.9.7-3.fc14
Selinux Enabled True
Policy Type targeted
Enforcing Mode Enforcing
Plugin Name leaks
Host Name localhost.localdomain
Platform Linux localhost.localdomain 2.6.35.6-45.fc14.i686
#1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 i686
Alert Count 1
First Seen Fri 21 Jan 2011 02:01:09 AM PST
Last Seen Fri 21 Jan 2011 02:01:09 AM PST
Local ID fb73799a-8d3c-4d9a-8c06-a0c1b6d4814e
Line Numbers
Raw Audit Messages
node=localhost.localdomain type=AVC msg=audit(1295604069.730:15): avc: denied { read write } for pid=1731 comm="ntpd" path="socket:[14643]" dev=sockfs ino=14643 scontext=system_u:system_r:ntpd_t:s0 tcontext=system_u:system_r:firstboot_t:s0 tclass=netlink_route_socket
node=localhost.localdomain type=SYSCALL msg=audit(1295604069.730:15): arch=40000003 syscall=11 success=yes exit=0 a0=8a1ad60 a1=8a1b040 a2=8a1b2c8 a3=8a1b040 items=0 ppid=1730 pid=1731 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ntpd" exe="/usr/sbin/ntpd" subj=system_u:system_r:ntpd_t:s0 key=(null)
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I occasionally see messages in my logwatch report then cannot find the actual log entry. Is there any way I can have logwatch give a clearer report?an example:
vsftpd:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=a-specific-user
[code]....
I have an existing Nagios installation from before I started working here. It seems to be working well but my boss has just asked for a report of what servers and the associated processes/functions are being monitored. Is there any way to generate this report other than going through all the Nagios configuration files and putting it together manually?
View 3 Replies View RelatedI'm running F 13 and today's updates included updates to Xorg, so I logged out and back in to let them take effect. Ever since then, Firefox has been repeatedly crashing, especially on certain sites. I managed to get the crash reporting tool to report it to Bugzilla, but when I try to go back to add the bug report to this post, Firefox crashes, every single time. Has anybody else found this? If somebody can get to bugzilla.redhat.com and find the report (The email address I use there is joe@zeff.us if it helps.) I'd appreciate having it added as a response to this, so that others can find it and,
View 14 Replies View RelatedI now have Fedora 14 64bit up and running.
I need a bit of clarification. I've been using Debian based OSes. I just want to make sure that I understand how to install software using Fedora.
While I had the Live DVD desktop running I downloaded the Google Chrome .rpm pack to the download file, right clicked on the .rpm and opened with the archive manager. The archive manager came up and showed me a file folder, the a popup came up on it's own and ask if I wanted to install, clicked yes and every thing from there worked, Chrome was installed and worked. When I tryied to download the plugin for Google and do the same as before, the install popup didn't come up. This is the part where I made a mistake, I went to the download folder and double clicked on the .rpm and the install popup came up, and I installed. This some how messed up the Live desktop to the point that I had to reboot, shut down didn't even work right.
I should have opened the folder the archive manager placed the .rpm and then double clicked on the .rpm to install instead of within the dowload folder.
I aslo read up on how to use rpm -i filename From the terminal can I Or does the .rpm package have to be in the correct folder before installing?
Also from the live dvd I tried using sudo rpm -i , but got a warning and said I would be reported.
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies View RelatedI installed Scientific Linux just for fun, but I find the repositories much too lacking. So, order to tackel that problem, I decided to try to install the fedora-release-14 package. Truns out, sl-release is blocking my success because sl-release obsoletes fedora-release. Then I tried the Rawhide one and it is still obsoleted. How do I add this Fedora Base repositories to Scientific Linux?
View 2 Replies View RelatedI think this happened after I upgraded to 10.04. Any ideas?
View 9 Replies View RelatedI'm using fedora 11 and find that sometimes the wireless just turn off by itself. The wifi LED goes OFF and Network Device Control->wlan0 becomes inactive. It usually happens when I open for a long time ( 24 hr ?) I try turning off the wireless and turning on.
View 5 Replies View Related