Fedora Hardware :: 14 - Report 2.6GB RAM On AMD Zacate E-350 4GB
Mar 18, 2011
I finnaly put my hand on a mini-itx board with the AMD E-350 2 cores Zacate CPU with ASROCK E350M1 E350 A50M R with 4 GB ram. I installed fedora 14 64 bits first, than 32 bits lastly and in both case, linux fedora 14 reported only 2.6GB of my 4GB ram. On the bios, I read 4096MB with 384MB shared.
I booted a cd with memtest86 V4.20, and it reported 3709MB of ram, that seems ok. under linux fedora 14: free -m, show: 2637MB, under monitor, we can read, 2.6GiB
View 14 Replies
ADVERTISEMENT
Apr 28, 2011
I'm running Ubuntu 11.04 Natty on a MSI E350IA-E45 with the AMD/ATI Zacate chipset, and I'm not being able to get hardware accelerated graphics working. I tried installing and activating FGLRX, but it doesn't seem to have solved anything. There is no hardware acceleration as far as I can tell, and XBMC complains that there's no OpenGL support. If there's some other way to activate hardware acceleration, I don't know where it is. I looked around Catalyst, but couldn't find any mention of OpenGL or any way to "turn on" hardware acceleration. Then I tried removing FGLRX and reinstalling the xserver-xorg-video-ati drivers as per [URL] , but got a black screen on reboot. Went into the recovery mode, reinstalled FGLRX, and am pretty much back where I started (with a GUI but no hardware acceleration), with no how to proceed from here. I'm especially confused because, from what I have read, the Zacate seems to get along with Natty out of the box for most people.
View 4 Replies
View Related
May 14, 2011
Yesterday I downloaded and installed Wheezy 64 from the most recent debian-testing-amd64-netinst.iso (as of yesterday) on my new Zacate-based MSI E350IS-E45 (MS-7698) AMD E-350 ITX motherboard. I figured I needed something recent to support a very new chipset, I don't think Squeeze was even stable when this chipset came out.
Everything seemed to go smoothly, I was asked for the firmware tarball, but I guess I hit the wrong button and the installing just continued. Everything set up OK, it seemed, but I didn't have speakers or headphones on the system. I didn't appear to need the firmware-linux package, the networking was working, radeon was providing proper screen resolution, if kind of crummy performance (Desktop Effects wouldn't work in KDE, for instance, and 1080p won't play, though it does better than in Ubuntu).
But as I was configuring some program it complained about no sound output, I didn't make much of a note of it, I figured it was just some muted mixer, or such, I haven't had many problems with Linux audio before (except getting spdif to work, but I didn't need that here). But I started noodling around and sound was just not working.
aplay -l
aplay: device_list:235: no soundcards found...
lshw -C sound
*-multimedia:0 UNCLAIMED
description: Audio device
[Code]....
So I installed the the firmware-linux & firmware-realtek packages, no effect (actually, not quite true, my ethernet speed seemed to increase). Then I tried the Liquorix 2.6.38-6.dmz.1-liquorix-amd64 kernel, no joy. Attempting to "insmod" various snd modules just gives me "No such file or directory"
At this point I don't know what to do. I guess I could try "upgrading" to sid and hope for the best. Or I could uninstall all of pulseaudio, which I know has been very problematic for a lot of people. I could even try to purge and reinstall a bunch of alsa packages:
[Code]....
I suppose I could try to go to the alsa web site and download & install its driver, lib & utils. I'm really hoping it won't come to that, sound should really work out of the box. Or I could just wait and hope a future upgrade sorts out the sound.
View 14 Replies
View Related
May 17, 2010
I've been having problems with pdf files made using latex (dvi->ps->pdf). I found a reported bug in bugzilla by searching the error message and made a comment. The 'problem' is that the bug is filed under evince, but I'm pretty sure it is in ghostscript. Should I file another bug in the ghostscript section, or will the clever people at bugzilla work it out once they get round to this particular bug (it's marked as low priority)?
The bug report can be found here[URL]..The bug is more annoying than anything else, so any advice is welcome.
View 1 Replies
View Related
Feb 8, 2010
Is is possible to create a report which contains every Disk usage status, Exim mail q , and etc and generate it into the excel files monthly.
View 4 Replies
View Related
Oct 25, 2009
I don't know what bugzilla wants to know. I tried to create a new report, but I failed at the first page/question. THe page ask me to enter a classification. But I don't know want that could be. I check multible times but I got always just a big red EM. What's to enter at 'named tag' and at 'to bugs'?
View 4 Replies
View Related
Jun 30, 2010
I've been running Fedora since core 6, am on 13 now, always with KDE. I upgraded but also did fresh installs.I'm typing, in oo.org, Kile or Kate. Suddenly, without warning, the File menu is selected - mind you, without me clicking the mouse or pressing alt-F or anything. Just typing text.
Or how about this: I'm typing again. All of a sudden the direction changes from the normal left to right to the Hebrew right to left. I think I only pressed ctrl-s to save... Did I?
I can't reproduce any of it, although it seems to be related to Kate based editors and using alt-tab to switch windows. Like the alt key hangs digitally. Is it Linux, Fedora, KDE or Kate? (it can't be the computer, this has happened to me on several distinct machines) Where do I report this, to get a fix?
View 3 Replies
View Related
Jul 16, 2010
when i am prompted to send a bug report i am given two choices. either i ll use bugzilla or logger. which one should i be using?
View 2 Replies
View Related
Jan 29, 2011
I don't need to be advised if a printer job failed on my screen. I am sitting beside the printer. I know someone needs that feature but how do I turn it off.What software is responsible for putting a printer icon up and then giving me this output? And will that software accept a request to change the default behavior?
View 3 Replies
View Related
Oct 28, 2010
just installed Fedora 13 on a pentium 4 laptop by Dell, with 1 Gb RAM.
As I opt for Compiz, it cannot start, there is a black pop up saying Crash, and some numbers follow. How can this be fixed?
Should I install KDE?
Is there an update of software?
I can opt for Compiz but worry that it will be faulty. That is the second attempt also produced the crash warning pop up but gave me the option of keeping it or going back after about twenty seconds, with the figures on the screen. I played it safe. Also can I try it, and manually go back?
Error report shows Compiz killed by Signal 11 SIGSEGV, this was added after post 9.
View 13 Replies
View Related
May 12, 2009
have a script that will report whenever a file is copied? Some useful information would be the time/date, user, and destination whenever a file is copied. I've looked into the stat command, but it does not distinguish between copy and access.
View 4 Replies
View Related
Aug 6, 2009
I coundn't log in fedora anymore. Everytime i try, i receive the report "unable to open session".
View 6 Replies
View Related
May 25, 2009
After running
Code:
nessus-fetch --register <Activation Code>
I got
Code:
nessus-update-plugins could not be found in your $PATH
When I try to run a scan on localhost I get the message "nessusd returned an empty report".
Here's the entry in nessusd.messages
Code:
[Mon May 25 00:30:03 2009][13188] user mickey.harvey : testing 127.0.0.1 (127.0.0.1) [13189]
[Mon May 25 00:30:04 2009][13189] Finished testing 127.0.0.1. Time : 0.03 secs
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : test complete
[Mon May 25 00:30:04 2009][13188] Total time to scan all hosts : 1 seconds
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : Kept alive connection
I would like to get the scan working and make sure that nessus is updating the plugins. I have been looking though the nessus documentation and tried searching on Goggle without any success.
View 1 Replies
View Related
Jan 25, 2011
I've been trying to make sense out of this error report. I get it every once in a while on startup of my machine.
Code:
Summary:
SELinux is preventing /usr/sbin/ntpd access to a leaked netlink_route_socket
file descriptor.
Detailed Description:
[ntpd has a permissive type (ntpd_t). This access was not denied.]
SELinux denied access requested by the ntpd command. It looks like this is either a leaked descriptor or ntpd output was redirected to a file it is not allowed to access. Leaks usually can be ignored since SELinux is just closing the leak and reporting the error. The application does not use the descriptor, so it will run properly. If this is a redirection, you will not get output in the netlink_route_socket. You should generate a bugzilla on selinux-policy, and it will get routed to the appropriate package. You can safely ignore this avc.
Allowing Access:
You can generate a local policy module to allow this access - see FAQ [URL]
Additional Information:
Source Context system_u:system_r:ntpd_t:s0
Target Context system_u:system_r:firstboot_t:s0
Target Objects netlink_route_socket [ netlink_route_socket ]
Source ntpd
Source Path /usr/sbin/ntpd
Port <Unknown>
Host localhost.localdomain
Source RPM Packages ntp-4.2.6p2-7.fc14
Target RPM Packages
Policy RPM selinux-policy-3.9.7-3.fc14
Selinux Enabled True
Policy Type targeted
Enforcing Mode Enforcing
Plugin Name leaks
Host Name localhost.localdomain
Platform Linux localhost.localdomain 2.6.35.6-45.fc14.i686
#1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 i686
Alert Count 1
First Seen Fri 21 Jan 2011 02:01:09 AM PST
Last Seen Fri 21 Jan 2011 02:01:09 AM PST
Local ID fb73799a-8d3c-4d9a-8c06-a0c1b6d4814e
Line Numbers
Raw Audit Messages
node=localhost.localdomain type=AVC msg=audit(1295604069.730:15): avc: denied { read write } for pid=1731 comm="ntpd" path="socket:[14643]" dev=sockfs ino=14643 scontext=system_u:system_r:ntpd_t:s0 tcontext=system_u:system_r:firstboot_t:s0 tclass=netlink_route_socket
node=localhost.localdomain type=SYSCALL msg=audit(1295604069.730:15): arch=40000003 syscall=11 success=yes exit=0 a0=8a1ad60 a1=8a1b040 a2=8a1b2c8 a3=8a1b040 items=0 ppid=1730 pid=1731 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ntpd" exe="/usr/sbin/ntpd" subj=system_u:system_r:ntpd_t:s0 key=(null)
View 2 Replies
View Related
Jan 23, 2010
I occasionally see messages in my logwatch report then cannot find the actual log entry. Is there any way I can have logwatch give a clearer report?an example:
vsftpd:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=a-specific-user
[code]....
View 2 Replies
View Related
Feb 23, 2010
I have an existing Nagios installation from before I started working here. It seems to be working well but my boss has just asked for a report of what servers and the associated processes/functions are being monitored. Is there any way to generate this report other than going through all the Nagios configuration files and putting it together manually?
View 3 Replies
View Related
Jul 7, 2010
I'm running F 13 and today's updates included updates to Xorg, so I logged out and back in to let them take effect. Ever since then, Firefox has been repeatedly crashing, especially on certain sites. I managed to get the crash reporting tool to report it to Bugzilla, but when I try to go back to add the bug report to this post, Firefox crashes, every single time. Has anybody else found this? If somebody can get to bugzilla.redhat.com and find the report (The email address I use there is joe@zeff.us if it helps.) I'd appreciate having it added as a response to this, so that others can find it and,
View 14 Replies
View Related
Feb 25, 2011
How do I report a bug concerning opensuse 11.3
View 9 Replies
View Related
Mar 28, 2011
Is there a way of reporting a bug in reportbug? I was trying to report a bug in another package and everytime I tried to run reportbug, the terminal window would display "Segmentation fault" or if I ran it with the --configure option, a GUI opens up, select Continue, then the screen says "This may take a while...". Well, 20 minutes later, the screen still says "This may take a while" and reportbug is still doing nothing..
View 3 Replies
View Related
Aug 2, 2011
When trying to file a bugreport on udev reportbug hangsSo I tried changing the package name to libc6 (just to see if there is reportbug issue)I get**Gdk:ERROR:/build/buildd-gtk+2.0_2.24.4-3-i386-ouUeDk/gtk+2.0-2.24.4/gdk/gdkregion-generic.c:1110:miUnionNonO: assertion failed: (y1 < y2)
View 2 Replies
View Related
Jul 26, 2010
I want to report a bug in rhythmbox. But apparently, it doesn't use launchpad, it uses Gnome Bug Tracker. But where is this located? I can't find Rhythmbox in bugzilla. Goggling for "gnome bug tracker" doesn't bring up anything useful.
View 2 Replies
View Related
Jul 26, 2010
it's not a real bug/error in Ubuntu per se, but i found an error in the spanish language pack of Ubuntu.There were some words that weren't translated right.I was wondering how to report/change that.I actually found it in the Ubuntu 9.10 spanish language pack, so i don't know if it's been fixed for lucid, but i thought it would be good to know either way just in case i find some other translation errors.
View 6 Replies
View Related
Jan 5, 2011
Is there a way to report a bug on a launchpad ppa? I see the Bugs section only has search, with no open bugs. Is there another way to report a bug on this system?
View 1 Replies
View Related
Feb 23, 2011
It purports to start and then just disappears. Any way to fix this? I'd report a problem, but...
View 2 Replies
View Related
Mar 20, 2011
I just installed 11.04 alpha 3 and I found a bug in the installer. Even though I told it to install the boot loader on /dev/sda7, it installed it on /dev/sda and messed up my other settings. I would like to report a bug, however, when I go to Launchpad and select "report Ubuntu bug" I get sent to this page:[URL]I can see how to report a bug for a currently running process (which would be hard if the process has just crashed), I can see how to request new software/features, but there is nothing for the installer.
View 1 Replies
View Related
Nov 16, 2010
I have installed Cacti 0.87e in fedora 11. And it is working fine. But as per our organizational requirement, they want report as pdf format. I have installed nmidcreate pdf also for the same. It generates the report in pdf format but the content of the pdf is blank i.e. it does not contain any graph or value in the report. It shows only header and footer information, nothing more than that. Kindly resolve this issue, either using the above mentioned plugin or other else. Because this is an urgent requirement. I am waiting for your affirmative response.
View 6 Replies
View Related
Jul 3, 2010
A) determine if a package is orphaned
B) Report it and to whom
I'm referring to Exaile, which seems to have lost the interest of the maintainters judging by how far behind they are on releases, and lack of any excuses more info on package pages.
View 5 Replies
View Related
Sep 3, 2010
What is the appropriate mechanism for reporting bugs in KDE?
View 4 Replies
View Related
Jan 16, 2010
Having recently gone on an interview with a company that attempted to con me into writing malware for Linux desktops (which made the assumption that javascript and flash were present), I am concerned about this.I have a fresh install of Ubuntu 9.10 desktop x86-64. I wanted to download a free documentary via bit torrent but don't trust bit torrent sites and needed to be able to search for seeds from the client. I installed Vuze (formerly Azureus) from repo. I opened the client and searched for my file and BLAMO!, twenty or so notices came up about me needing an anti-virus, trojans being on computer, etc. Clearly this phishing attempt was directed at a Windows machine, however the behavior of the application is unacceptable. I haven't checked to see if any files were downloaded or nasty tracking cookies created (though I did get one prompt for my password), but I was curious: Is there a place to report potentially malicious or unsound applications in an Ubuntu recognized repo?
View 8 Replies
View Related
Mar 26, 2010
There is an issue with kmenuedit. It was complaining that it couldn't write to /home/usuariokubuntu/.kde/share/config/kmenueditrc. But even running it with sudo, the behavior was strange (the applications weren't saved at the menu, and everything was very slow - like taking 40 seconds to create a new item at the menu). It seems that the problem was that the file /home/usuariokubuntu/.kde/share/config/kmenueditrc was setted as owner and group as "root". I've changed the ownership and the group of that file to the user owner of home (in my case, usuariokubuntu), and it is working fine now. So, I would life to report this, so developers can fix the issue. I've upgraded a completely clean instalation of kubuntu 9.04 to 9.10, so I don't know if the issue also happens when directly installing 9.10.
[Code]...
View 3 Replies
View Related
