Fedora Servers :: Visualize Core12 Server On 10 Host?

Jun 26, 2010

I have a "stable" core 10 server that is hosting multiple visualizations: Setup details The host is on a dedicated non raid drive. The virtualization for each system was created in one of two ways... mainly because I was learning when I set this up a year ago. The first way was that I created the filesystem as a .img on the boot drive then I added access to a raid5 array as an additional mount point in the booted .img file. This has worked fine for a year. The second way was introduced when I added a raid1 array for additional "testing" systems. I partitioned the raid1 like this:

[code]...

I then proceeded to add /dev/md1 as a mount point to the original .img for additional storage works fine. I then created a new system using /dev/md2 this is where things change up as I installed Core12 system directly onto the /dev/md2.....

View 5 Replies


ADVERTISEMENT

Fedora Servers :: How To Make Server To Host

Apr 28, 2009

I am kinda new to Linux so I build a computer a put Fedora 10 on it. I would like to make it into a server so I can host Warcraft III FT.

View 3 Replies View Related

Fedora Servers :: Name Server: Mail.si.uk Host Not Found?

Oct 24, 2009

i configured my sendmail, bind dns server + dovecot. i am getting the following error when i use to send email from 'root' to 'convert@mail.si.uk',

Oct 26 10:40:42 localhost sendmail[6829]: n9Q5ebnX006827: to=<convert@mail.si.uk>, ctladdr=<root@localhost.localdomain> (0/0), delay=00:00:00, xdelay=00:00:0
0, mailer=esmtp, pri=120345, relay=mail.si.uk, dsn=5.1.2, stat=Host unknown (Name server:

[code]....

View 1 Replies View Related

Ubuntu Servers :: Can Host Multiple Sites On The Same Server?

Aug 15, 2010

Recently I've been earning money doing web development, php, html/css, MySQL and so on. What I have encountered a lot are clients that need a complete solution. They need their site built, but they also need a hosting solution. I've sent more than just a few clients off to GoDaddy, and quite frankly, I'd like to cash in on some of that.

It would do wonders for my business if I could offer them a hosting solution with full support on top of building their site. My problem is I have no idea how to do this. So I'd like to know how I can host multiple sites on the same server. Does anyone know of a nice guide I can follow to set this up? It's really important that I can add sites fairly easily over the internet. Since I will be away at school, I won't have direct access to the server

View 4 Replies View Related

Ubuntu Servers :: Use Server On The Web And Actually Host A Website Or Blog

Nov 23, 2010

building your own with perhaps LAMP. It appears the purpose of one is to test websites? Is it not possible to use your server on the web and actually host a website or blog or whatever?

View 6 Replies View Related

Server :: Host Unknown Error:Sendmail / Stat=Host Unknown (Name Server: Def-fgh.com.: Host Not Found)?

Sep 8, 2009

Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.

There are more examples of the same,around 20 domain have the same problem.

Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)

Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)

View 2 Replies View Related

Ubuntu Servers :: Cannot Ping Host From Guest Using Vmware Server 2 / Fix It?

Apr 25, 2010

Not sure if this post belongs here, but here it is.

Host: Win server 2003
Guest: Ubuntu server

Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser.
Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.

Problem: guest needs to access host's sql database and/or any resources.

Network: is bridged.

At the Linux box ifconfig -a code...

View 7 Replies View Related

Ubuntu Servers :: Apache Virtual Host To Access Internal Server?

Apr 20, 2010

I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.

View 3 Replies View Related

Ubuntu Servers :: Unable To Resolve Host URL - Domain Setup / Home Based Web Server

Jan 18, 2011

I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.

[code]...

I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.

View 9 Replies View Related

Fedora Servers :: Host All The Manpages On A Apache?

Sep 24, 2009

I am using FC9. Can anyone tell me how to host all the manpages on a Apache Server so that a user can access it using the webbrowser like firefox. After googling I came across something called man2html but it really did not work.

View 11 Replies View Related

Fedora Servers :: Start To Host Personal Website?

Apr 26, 2009

how i can start to host my own personal website on my own server that i just created.I was wondering if there were tips you can give me or a site you can recommend me to where i can get lessons on how to host my own site on my own server using fedora 10.

View 2 Replies View Related

Fedora Servers :: Apache Not Recognizing Virtual Host 12?

Apr 17, 2010

I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.

I have made the following additions to the /etc/httpd/conf/httpd.conf file

Code:
NameVirtualHost 97.158.234.76
<VirtualHost 97.158.234.76>
ServerName www.chaalu-kam.com
DocumentRoot /var/www/html/

[Code]....

View 1 Replies View Related

General :: Program To Visualize Anything That Goes Through My Audio-output?

Jun 1, 2011

I'm looking for a program that will visualize anything that goes through my audio-output (in this case it's Spotify) and display it on the screen. Does this exist?

I'm running Ubuntu.

View 1 Replies View Related

CentOS 5 :: Convert And To Visualize Iges And Dxf Files?

May 4, 2010

i have need to convert and to visualize iges and dxf files. I have found gcad3d program but it work only with gtk version 2. On Centos 5.x is installed the gtk 1.2.10 and gcad3d don't work. Other programs that run on centos for this purpose?

View 1 Replies View Related

Fedora Servers :: Gnome Error - Hostname: Unknown Host

Mar 23, 2009

I installed Gnome on my server by when I run

Code:

[root@F026 ~]# startx

Code:

hostname: Unknown host
xauth: creating new authority file /root/.serverauth.2915
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686

[code]...

I don;t have physical access to the system and it is a server located in Europe. Fedora release 10 (Cambridge) is installed in it.

View 2 Replies View Related

Fedora Servers :: Apache Virtual Host Redirect To Default?

Jul 1, 2009

I've created a virtual host and when I try to access it it displays the root of the Default Server. Running Fedora 11. This works fine in our Fedora 8, same configuration.

192.168.0.200
Default server is set to
Listen 80
virtual server

[Code]....

View 2 Replies View Related

Fedora Servers :: Porting MySQL Database To Host Company

Jul 17, 2009

i'm new to MySQL and i designed a database using MySQL and PHP recently but dont know how to port it to my host company. How do i save the database on my flash drive then transfer to my host on my website's control panel.

View 1 Replies View Related

Fedora Servers :: Make A Website With A Virtual Host Of Apache Visible?

Nov 8, 2010

In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):

[Code]...

It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!

View 2 Replies View Related

Server :: Apache Server Not Recognizing Virtual Host Fedora 12

Apr 17, 2010

I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.

I have made the following additions to the /etc/httpd/conf/httpd.conf file

Code:

In addition to this, I have added this to my /etc/hosts file

Code:

I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too

View 10 Replies View Related

Server :: Apache2 Virtual Host Defaulting To Default Host

Oct 30, 2009

Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.

View 1 Replies View Related

Fedora Networking :: Setting Up NFS Server On Host?

Sep 5, 2009

I am trying to set up a nfs server on my Fedora 11 host machine so that my virtual machines on the same host can access files on the host.The ip address of my host machine is 192.168.1.132The ip address of my virtual machine is 192.168.122.180I can ping successfully from host to virtual machine and vice versa.On the host machine, I have the following :1) Edited /etc/exports to add this one line./home/stardust496/files 192.168.122.180(rw,nohide)2) service rpcbind restart3) service nfs startOn the irtual machine, I do the following:1) mkdir /mnt/files2) mount 192.168.1.132:/home/startdust496/files /mnt/filesBut the mount call does not succeed. (It hangs for a while and then returns saying that it did not succeed)

View 3 Replies View Related

Red Hat / Fedora :: Build A Server To Run CentOS5 To Host Domains?

Jul 6, 2010

I'd like to build a server to run CentOS5 to host domains & run Boonex's Dolphin 7. I can't afford the hardware at present, but do have a spare laptop to test with. My two questions:

1) Is is possible to create a build on my laptop, with CentOS, PHP, Dolphin 7, DNS etc, and then create an image to transfer to the future hardware server when constructed? If not, are there alternatives e.g. to copy settings, and then paste then onto the new CentOS install? Anything else I should consider for doing this future move?

2) I presume it's not possible to transfer from 32bit (now) to 64 bit (possibly later) CentOS5?

View 1 Replies View Related

Fedora Security :: The DNS Server Discloses The Remote Host Name - Can This Be Turned Off

Jun 15, 2010

We recently had a vulnerability scan done on our network and one of the vulnerabilities was that the dns server discloses the remote host name when using hostname.bind.

Is there any way that we can stop this from happening? Our name server is a Fedora 11 machine.

View 2 Replies View Related

Fedora Networking :: Mount To NFS Server Failed - No Route To Host

Jun 22, 2011

I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try.

Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
The Fedora 12 machine has the NFS server running, and the corresponding entry in /etc/exports is
Code:
/mnt/dvd *(ro)

I thought this might be a firewall problem, but it persists even if I turn firewalls off on both machines (client as well as server.) Also, doing
Code:
ssh 192.168.0.105
is OK, so what is wrong with the route?

I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try. Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo

I now tried
Code:
mount 192.168.0.105:/mnt/dvd -t nfs4 /tmp/scaleo
and it seems the mount succeeded. So, instead of nfs, one must write nfs4?

View 9 Replies View Related

Fedora Servers :: Getting Error Message When Trying To Connect To Vncserver 'unable Connect To Socket: No Route To Host (113)'

Apr 26, 2011

I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:

[code].....

The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?

View 4 Replies View Related

Ubuntu Servers :: Registered VPS With Another Host?

Apr 5, 2010

I ordered my VPS but my domain name that I registered my VPS with is with another host. So obviously I have to update the nameserver options there. How can i find out what my nameserver settings on my vps? I'm using webmin.

View 3 Replies View Related

Ubuntu Servers :: How To Host EyeOS Myself

Jun 7, 2010

I came across this great open-source script called EyeOS [url] a few months ago and found a free hosting provider to go with it.

After playing around on the demo setup, I spent quite a bit of time figuring out how to get it set up on a hosting provider via FTP. Once that was set up, things ran smoothly for a few weeks until one day I logged into my user CP and saw a notice that they were shutting down and selling their server to a new adult video site and that all sites would be deleted in like 72 hours. I could never find another hosting provider that could give me the space I needed without ads for free, so I had this crazy idea of hosting it myself.

I have an older box with Lucid Desktop Edition that would be great for a server (I mainly use my laptop anyway), but there are a few problems: I have very little experience with Linux (although I'm great w/ Windows). I need Apache and PHP but I have no idea how to install them (and make them work together) and where to put the files to "serve." Knowing some administrative commands .

My ISP blocks incoming connections on port 80. I need help deciding on an alternative port besides the blaringly obvious port 8080 that won't conflict with anything important. I'll most likely link to it from our homepage on Google Sites (with a free .tk domain) so it doesn't need to be easy to remember.

View 2 Replies View Related

Fedora Servers :: Turn Public Server Into A Sendmail Server?

Feb 22, 2009

I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?

View 1 Replies View Related

Ubuntu Servers :: No Directory When Trying To Start Host ?

Apr 7, 2010

I type in /etc/init.d/hostname.sh start

And I receive bash: /etc/init.d/hostname.sh: No such file directory

For hostname I've use "hostname" and my actual hostname, and both receive the same error.

Although when I do hostname is shows the correct hostname but without the the comcast part of it , and when I type in hostname -f, I get the correct hostname with the comcast part of it.

View 8 Replies View Related

Ubuntu Servers :: SSL Only On Apache2 Virtual Host?

Apr 16, 2010

I currently have a virtual host setup to accept SSL connections as follows:

Code:
<VirtualHost *:443>
DocumentRoot "/var/www"
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem

[Code].....

How would I change it so that it can only be accessed via HTTPS ??

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved