Red Hat / Fedora :: Build A Server To Run CentOS5 To Host Domains?
Jul 6, 2010
I'd like to build a server to run CentOS5 to host domains & run Boonex's Dolphin 7. I can't afford the hardware at present, but do have a spare laptop to test with. My two questions:
1) Is is possible to create a build on my laptop, with CentOS, PHP, Dolphin 7, DNS etc, and then create an image to transfer to the future hardware server when constructed? If not, are there alternatives e.g. to copy settings, and then paste then onto the new CentOS install? Anything else I should consider for doing this future move?
2) I presume it's not possible to transfer from 32bit (now) to 64 bit (possibly later) CentOS5?
View 1 Replies
ADVERTISEMENT
Sep 15, 2010
I want to build a PXE boot server on rhel5/centos5 from which all type of OS(Linux distros,Windows - xp,vista,7) these can be installed on any client on my LAN . I have tried it for some linux distros with TFTP ,but unable to add windows.
View 2 Replies
View Related
Jun 2, 2011
I've been for a while trying to configure my apache to host 5 domains as virtualhosts in the same IP address, but seems that neither one makes it through... it always takes first one, because it is the default:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin xxxxxxx@xxxx.net
[code]....
As you can see I tried the ServerName with the http://, in quotes, without it...
View 11 Replies
View Related
Sep 24, 2009
as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
View 1 Replies
View Related
Jan 4, 2010
At home we have a small home network, but it is very slow. I believe it is, because some computers are placed in a workgroup, called WORKGROUP and others are placed in a domain called TUE. The domain is because many of the laptops at our house also have to work on our university, and I can't simply put them in a workgroup.
The reason why I believe it is slow because of this, is because file sharing between the computers in the workgroup goes with 5 MB/s. File sharing between a domain computer and a workgroup computer goes as fast as 160 KB/s. This is the upload speed of our internet here. How to make the connection with the domain computers the same speed as the workgroup computers? I can not simply put the domain computers out of their domain and in the workgroup (as explained before)
Our network looks as follows:
Internet
/
||
/
Modem
[code]....
View 4 Replies
View Related
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Sep 17, 2010
I would like to install and configure Transparent squid proxy on a gateway server ,but i dont have a local OR intranet DNS server.I am facing issues do that ,regard .My IP series is 192.168.1.1/24
View 5 Replies
View Related
Oct 25, 2010
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies
View Related
May 5, 2010
I have been finding the solution of this problem from last 2 days but i am still unable to get a clue what's happening?I have a virtual dedicated server in godaddy with CENTOS5 operating system. The problem is occurring with the named service. It is becoming dead within 1 hour of starting it./named status gives named is dead but subsys is locked.The issue is their in google but it has no solution.Anybody have a idea what's going on ... i am fed up of starting teh named service again and again.
View 2 Replies
View Related
Oct 2, 2010
I am hosting apache service on the CentOS5.4. I configure the Apache in default setting mostly. But keep getting complaints from others about the website download too slow, pdf cannot download at all, flash cannot play smoothly, etc.. But on my own machine, everything works fine. Is there any tool for analyzing this problem?
View 5 Replies
View Related
Mar 22, 2009
To clustering my web server so that it becomes Highly available. Its currently running php, apache and mysql with no redundancy in place. I want to be clustered so that if one node goes down then the second one will automatically take over. I have done that with HA in RHEL but I want to use centos clustering solution for this. Also how willl they share the web contents and mysql database among two nodes I have no idea. I have managed a iscsi target to store contents but it doesn't work as expected.
View 1 Replies
View Related
Jan 27, 2011
i have a centos 5.5 server, 300GB sas harddiscs.
but serval days ago, my server always show:
only read file system and top,ps,vi all command is not usefull and show error -input output
i search it on google, and read many pages
i found it has 2 reason most like
1.harddisks broken
2.2.6.18 kennel'bug
i bought a new hardiscs and change it on my server
View 2 Replies
View Related
Apr 7, 2009
I am a newbie on linux and now I just bought a dedicated server using centos5 and for one of my website, webcam chat. I need to install red5.
View 4 Replies
View Related
Nov 2, 2010
I am getting frustrated to the fact that I am in charge of developing a Enterprise class solution for my company and I don't find the right answer on the WWW. I have 3 mail servers that I want them to share a Global File System (GFS) that will be mounted via ISCSI on a RAID1+0 SAN Md3000i device. All the documentation that RHEL offers include the setup of DRDB or VLS Clustering.
My intentions are not to setup clustering on these servers, at least for now, however I want them to share access to the same block device, giving enough write/read access throughput . My question is, have you done something like this ? Do you know of any good Tutorial that you tried, and worked for you ?
View 2 Replies
View Related
May 17, 2011
Used to work fine, mybb forums and a blog, accidentally chowned everything to wrong account, then back to root, fixed mysql, shell and php and it got back up again yesterday, made a new database and updated some packages using webmin (OpenSSL etc), tried to install virtualmin but qMail blocked it, few hours later out of the blue all our php files download as .bin files, as downloadfile.bin on my android phone but others on our game server reported it downloading too.
We shut off apache for obvious security reasons and are considering to close shop if we cant fix this.
View 1 Replies
View Related
Apr 17, 2010
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
View 10 Replies
View Related
Jul 16, 2010
i have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing
View 3 Replies
View Related
Jan 4, 2010
I have installed apache tomcat 5.5.27 in centos5. I edited the server.xml file also. The startup.sh and shutdown.sh commands are working fine. But tomcat is not opening in the browser. Can you suggest me something or tell me the steps involved in installing tomcat. Is admin.tar.gz of apache tomcat required for its working?
View 1 Replies
View Related
Mar 16, 2009
When i run the command:
It shows output as:
View 1 Replies
View Related
Oct 15, 2009
I start to build up IMPS to my server. Any ideas where to start? Any experience so far. I this think yamicocom like service. And about 5 bugs to get in. What you think? I need to put some extra to this basic concept.
View 2 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Jan 7, 2009
I have yum installed mysql 5 on Centos5 and I can successfully run queries through shell.However, I want to now allow external access to mysql via some mysql tools (Mysql Administrator/Mysql Query Browser) which is on some windows machines on the same network.Mysql is running on port 3006.When i try connecting through mysql Admin i get the following:Could not connect to the specified instance.MySQL Error Number 2003Can't connect to MySQL server on 'ipaddress' (10065)If you want to check the network connection, please click the Ping button.Googling this I get the impression its something port related, but I have tried what I have found and still no go.When I ping the server I get:
Start Pinging:
Reply from ipaddress: Time=0ms TTL=64
Reply from ipaddress: Time=0ms TTL=64
[code]....
View 5 Replies
View Related
Mar 13, 2009
I am facing problem in postfix. I am using centos5.2.My postfix was running well but some strange problem it failed today.after that I wanted to restart postfix service , it does not restrat. But the postfix process is found in the process list( take memory and cpu ). Then i want to reinstall the postfix.The progress bar show it completed but not showing the completed message. I wait long time for the completion message but not display it and not return to command promt.When I cancel the command( ctrl+c) then the following error message is displayed:error: %post(postfix-2.3.3-2.1.el5_2.x86_64) scriptlet failed, signal 2For your information this is the process of installation:
yum install postfix
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
[code]....
View 1 Replies
View Related
Mar 3, 2011
I am trying to see if a can get a centos 5.5 server setup as an smtp store and forward spamfilter by following the Centos Wiki and the freespamfilter.org guide by Mr88Talent at [url], which relates to another linux distro.
The spamfilter is essentially working! however, i have one issue with DCC.
test problem:
I'm not sure if anyone else would be interested in a Centos version of Mr88Talent's tutorial, but a very rough and completely untested first effort is available at the following url: [url]
Any opinions on this setup or just a total slating of everything i have done wrong would be welcome as i don't want to waste time trying to use a setup that is just not going to be practical or reliable to maintain / keep operational.
I have read that yum update can break this type of system - which concerns me.
The intended use of the spamfilter is for a small business (only about twenty e-mail accounts). However, they still need to reliably receive e-mails (hopefully with less spam though).
View 9 Replies
View Related
Feb 24, 2011
I need to build a 3 node web server cluster to run a php application. Since the app requires users to login (which means a session state is to be maintained), I will be sharing sessions save path, I also need to share the application directory across 3 nodes. I having trouble deciding which cluster file system to select.
View 5 Replies
View Related
Mar 12, 2010
I've tried to set up an old laptop with Ubuntu server - need to use it as a web server for a group of students on a local network only. I managed to get it working fine for just one user publishing webpages etc to a folder called VAR/WWW I could FTP files into the folder and access them again via FTP or a browser. I then decided to create some subaccounts (one for each student) I did this by typnig the following commands:
Sudo usermod -g www-data student1
Sudo chown -R www-data:www-data /var/www/student1
Sudo chmod -R 775 /var/www/student1
(In this example student1 is intended to be a subfolder of www and act like a sub-domain with write authority- at least that was my intention) Problem I then get is that if I use Filezilla to access each account I cannot see where to publish the files - wherevever I place them they are not accessible from the browser. Do any of you experts out there know the answer to my problems please.
View 1 Replies
View Related
Nov 20, 2008
who manage Postfix servers, what do you recommend is the best way to refuse all incoming and outgoing mail to specific domains? I want a blacklist of domains such as:
- AOL
- Yahoo
- MSN
- Hotmail
- Gmail
Is there a proper way I can tell Postfix to please deny sending and receiving SMTP traffic to and from those specific domains I specify? I see no need in my corp. mail server has to communicate in any way to those. I allow access to all those accounts via port 80/443 so they can just login to the web and send non business related junk this way.
View 7 Replies
View Related
Apr 28, 2010
I am looking for a code for setting virtual alias for all domains and addresses. The scenario is that when I send an email from anywhere to my server, it will send to only one address but not send to the orginal recipient.
This is my code: I think the problem may be from the regular expression (.*) for any domains/email addresses
/etc/postfix/main.cf:
virtual_alias_domains = (.*) <-----
virtual_alias_maps = hash:/etc/postfix/virtual
/etc/postfix/virtual
(.*) admin@myserver.com <----
View 2 Replies
View Related
Mar 18, 2010
how would i move from domain1.com to domain2.com whilst making it so people can still use the old domain if they wanted to?
View 3 Replies
View Related
Jul 20, 2010
I am still in Linux Diapers. I setup a CENTOS SELINUX box on an internal network. So the only way I know to access it's served pages is by navigating to 10.1.1.40 from a computer within the network. The issue is that I need to create sub-domains for this server but have no Idea how to go about doing that.
Is there a way of creating an alias for the dev server so I can type something like "washington" into the web browser of a computer on the internal network instead of 10.1.1.40? Can I use a fake FQDN that on this server and get served its web pages or do I need to register a FQDN?
Background: I am creating a series of websites using Drupal and am trying to implement the multisites functionality (all the sites are run from a single code base). To do this they suggest setting up each site on a sub-domain during development. We have not yet purchase the FQDN's for the sites so I have no FQDN to setup.
View 1 Replies
View Related