I currently have a virtual host setup to accept SSL connections as follows:
Code:
<VirtualHost *:443>
DocumentRoot "/var/www"
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem
[Code].....
How would I change it so that it can only be accessed via HTTPS ??
I've just installed LAMP. http://localhost/ page works fine. I need to create some virtual hosts. Localhost page is situated in /var/www/. It's normal for me, and I wanted to created virtualhost (in /var/www/vhost1) But it doesn't open in browser. Where is my mistake?
/etc/apache2/ports.conf
Code:
NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# If you add NameVirtualHost *:443 here, you will also have to change
# the VirtualHost statement in /etc/apache2/sites-available/default-ssl
[Code]...
I want make several virtual Host using apache2. Each virtual host will have virtual domains in localhost with different root.
View 4 Replies View RelatedMy goal is a testing server with an apache virtual host for each site that I'm working on, with fairly painless setup for each new job.For example, I want http://site-a.mydomain to server this document root /home/client-a/site-a/public_html (or something to that effect)Ideally, DNS will use a wildcard to point http://anything-i-type.mydomain to the testing server, and apache will have a dynamic virtual host definition that will do a little magic so that I won't have to mess with DNS records or add a new virtual host each time I add a new site for a client. I'll worry about that when I get there, just put that out there in case anyone has any tips! for now I just have one little problem that's hurting my mood-
It looks like I've got my DNS server working just fine, so yay there- BUT my first attempt at adding a virtual host isn't working quite how I expected- meaning that site-a.mydomain now serves up the correct document root, but when you put http://site-a.mydomain into the browser's address bar, the address bar is then updated to http://10.0.1.100/site-a/public_html - bogus!! I must be missing an option like "FunnyBusiness Off" -
root@ubuntuvm:/etc/apache2/sites-available# vim client-a.mydomain
<VirtualHost *:80>
UseCanonicalName Off
ServerName site-a.mydomain
DocumentRoot /home/client-a/site-a/public_html
</VirtualHost>2
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View Related[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
It is possible for apache2 (debian) to host a frontpage page? All links I found from google and microsoft said that frontpage is dead. How can I host the site ?
View 4 Replies View Relatedwhen I'm trying to add a virtual host with a foreign character in the domain name. The foreign character is .
I've read earlier threads where it was said I should puny code it, which then translates to xn--nda
I then created a virtual host, as shown (replaced the real domain with exampl�:
Code:
<VirtualHost *:80>
ServerAdmin me@exampl�.com
ServerName exampl�.com
[Code]....
However, apache2 doesn't recognize this when I try to enter the domain, it just shows my 000default.
I have some problem in apache2 configuration. I have two websites on same IP on LAN.i.e. 192.168.1.5
[Code]...
What should I check in a few blogs I checked they said to mention in [URL]...But in this case what should I put I have two different websites or what other thing I have missed? I do not have access to DNS so that on LAN I can point site1.abc.com and abc.com to same IP 192.168.1.5 which to me seems could resolve the issue.
I upgraded karmic to lynx today and I'm stuck with some weird behaviour with one of my virtual hosts. The virtual hosts under /var/www/site work but my virtual host for DAVICAL which points to /usr/share/davical/htdocs/ doesn't.
Navigation to any html pages works but php files just show up blank!
Has there been a configuration change in lynx for virtual hosts outside of /var/www?
How do i remove a virtual host? i created it and i need to remove it from site-available
View 2 Replies View RelatedI have servera.domain.internal which has port 80 forwarded to the web as example.com. I have serverb.domain.internal which I want to forward on port 80 as subdomain.example.com. How to Show Apache server behind an apache server? How do I setup the virtual host on the internet exposed server? This is ubuntu 8.04
View 2 Replies View RelatedI am trying to set up an Apache2 virtual host to test sites I make from my own computer.
I used this guide to set up my LAMP and vHost, The LAMP stack seems to be working great, but I run into some problems when I try to set up a vHost
As described in the guide I
1. made a new directory in my home folder /home/[myname]/www/test.dev to put my site in (it currently contains a simple index.html file as a test).
2. In /etc/apache2/sites-available I copied the file "default" and renamed it "test.dev"
3. I edited the content of "test.dev" to look like this:
Code:
4. I enabled the site using the command "sudo a2ensite test.dev". I then restarted apache "sudo /etc/init.d/apache2 reload".
5. I edited the hosts file: "sudo gedit /etc/hosts" to look like this:
Code:
6. I restarted apache "sudo /etc/init.d/apache2 reload".
Now if I enter "http://test.dev" in my firefox's adress bar I just get the apache2 "It works!" site. What is going wrong to cause firefox to show the "It works!" page rather then my own test site?
I needed to create a virtual host for a php project I'm working on. Rather than using command line and text editors, I installed webmin to accomplish this and hopefully perform other server configuration in the future. When I created the virtual host and tried applying the changes Apache wouldn't re-start, and still doesn't restart after complete re-boot. It's getting hung up at the end of apache2.conf, which is trying to include /etc/apache2/sites-enabled/000-default.
When I look at 000-default from a File Browser, it's a linked file to etc/apache2/sites-available/default I can open both the linked file and actual file in a text editor, and it looks fine. When I view the directory, /etc/apache2/sites-available from shell, the default file isn't visible. It seems this "invisibility" is probably related to the error, which is preventing start-up. Can anyone explain why the file would be visible from the Ubuntu File Browser GUI but not from the terminal, and how I can fix so apache can recognize this on start-up?
Im looking to use the Apache2 GeoIP mod to block countries from accessing a website. I've searched, but cannot seem to find any information on how to insert the code into the virtual host file. Does anyone know how to get this working or can point me in the right direction?
View 2 Replies View RelatedWe got a new server with 2 network interface cards with 4 MAC addresses in total. We would like to run two virtual machines (vserver1 and vserver2); one should connect via eth1, the other via eth2, and the host (mainserver) via eth0. The content of /etc/network/interfaces is as follows:
[Code]....
A connection from mainserver to vserver1 or vserver2 is not possible; a ssh connection from mainserver to vserverx ends with a login to mainserver.
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies View RelatedI've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
NameVirtualHost 97.158.234.76
<VirtualHost 97.158.234.76>
ServerName www.chaalu-kam.com
DocumentRoot /var/www/html/
[Code]....
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
View 3 Replies View RelatedIf I go to a virtual host it asks me if I want to save "index.php" (Typing in the host name followed by index.php also works). But if I go the main site it does not. This happened after an upgrade to Ubuntu 10.04
Here are some additional details - apachectl -M shows rewrite_module (shared) the host config file has AllowOverride All the dir and php5 modules are loading fine.
I've created a virtual host and when I try to access it it displays the root of the Default Server. Running Fedora 11. This works fine in our Fedora 8, same configuration.
192.168.0.200
Default server is set to
Listen 80
virtual server
[Code]....
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies View RelatedI'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies View RelatedI want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies View RelatedDom0 is having public IP. I read a lot of blog and tutorials about name based and IP based hostings and also about mod_proxy. But I am unable to do.
Here is what I am trying to do. I have a webserver on public IP.Which is running Xen on it. There are 4 Guest Operating systems installed on top of Dom0 which are Dom1,Dom2,Dom3,Dom4 These are application servers which are going to serve the requests that come from the main server.Which is Dom0.
All I see is "It works" on all 4 of the hosts. On my LAN on any machine on same subnet if I do [url] of Domu1 message comes
Code:
in browser from LAN gives me a message
Code: It works.
What do I need to do on Dom0 so that requests are forwarded to the appropriate DomUs apache2 is running on all of them including Dom0.Some one suggested me to go for ReverseProxy in Apache2.
any1 know how to config apache so i can use ServerName at my web browser ?
here is what i am trying to do: i need to host a number of web sites at my mac, for example: hostone.com, hosttwo.com, hostthree.com and etc since i need to host more than one website at the same pc, i use name based virtual hosts so i have hostone at 192.168.0.1:1234 and a servername of "hostone" hosttwo at 192.168.0.1:1235 with a server name of "hosttwo" and etc
my question is , how do i config my local settings, so all of my local network computers can access "hostone" site by type "hostone" at their browser and "hosttwo" site by type "hosttwo" at their browser
