I use vncviewer command line to remote access my pc from my notebook.
Is there any option to resize the view like windows client can by percentage?
my notebook screen size is 1280x800, while I use bigger resolution for my pc 1280x1024 if not mistaken.
already look here: http://linux.die.net/man/1/vncviewer but I don't see any option to do that.
i tried to install java jdk, and vlc, but to my surprise everytime i wanted to install a single application, a massive 500MB update appeared along with the 2 applications i wanted to install, then i tried the command line to just install one program, and got rep. errors, and several .lock errors at the command line. after hours of googling i gave up , this distro was recommended because of great laptop support, but it's a hell of trying to install a single program, with fedora i just did su -c 'yum install vim' , or ubuntu sudo apt-get install vim or slackware: installpkg vim.tgz , but opensuse was so bloated whenever i wanted to install a program or two. it is a royal pain to install anything in opensuse how do you guys deal with dependency hell in opensuse?
View 2 Replies View Relatedis it possible to extend a mirrored veritas volume which has two SAN LUNs each one in a seperate EMC storage box.
i need to add diska -> EMC box1
and diskb -> EMC box 2
then i need to increase the size of the mirrored volume.
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
I am using openSUSE 10.3 and the pc is DELL Optiplex 780. The network devices is not supported by openSUSE 10.3 but I may have found it's module. But I can't "MAKE INSTALL" it as my installation does not have MAKE command.
I have selected "Install All" during my installation. Linux version is 2.6.22.5-31-default.
What is the package name for the MAKE command? So that I can find it so that I can install it into my openSUSE 10.3?
I have a command which is application related and I get a output some thing like this when I execute the command...Quote:applicationrunningSo I need to write script to see if application is running, if application state running run some command else run echo command to state application is not running.So I need to run the first command, then based on output (Application status), run the second command else echo command.
View 6 Replies View RelatedI need to add a comment to /etc/passwd using usermod, but everytime I do it tells me that I can't modify a user in the LDAP database without DN. What is DN?
View 7 Replies View RelatedI have a script:
Quote:
# Call mail script to send an email
if [ -f /tmp/report.txt ]; then
/usr/local/scripts/mail.pl
sleep 10
rm /tmp/report.txt
else
exit
fi
What I need to do is, I want to check if file exists, if file exists call other script (mail.pl) and then delete the file (assuming mail.pl script executed). If file not exists just exit out of the script. I'm not sure how I can see that other script execution completed or not before I delete the file even though I put sleep command. And also it seems like its not that good, even though it is working. I wanted to see if we can write in more efficient way.
I am using SLES10 and i checked with command crontab -l and when i compared it with the cron.d/daily/monthly/hourly , all they are different. is there any single command that list out all the cronjobs that exist under the system.
View 3 Replies View RelatedI am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
View 4 Replies View Relatedi ran into a problem when i installed mplayer on suse 11.1 from source, it works just fine BUT it has no GUI.When i try to use the command "gmplayer", it returns 'bash: gmplayer: command not found
View 3 Replies View RelatedI am learning about group and user management with Fedora and can change the user's group using the usermod command but did not know if there was a command to see the group currently associated with the user.
View 3 Replies View RelatedI was running scripts overnight from the command line (inside Screen on a Linux EC2 instance) and some errors that I was not tracking occurred. I want to "scroll up" or view more of the history in Screen, but I cannot seem to find any commands that will work. I need to see the onscreen output "further up" than I can on my current screen. CTRL + a is supposed to put me into scroll mode inside Screen, but it's not working.
View 4 Replies View RelatedHow would I list every mp3 over a certain size on an entire hard drive?
View 1 Replies View RelatedI'm running Fedora 13. On a full screen terminal how do I increase the the size of the script.
View 4 Replies View RelatedI am using SUSE 11.0 KDE 4.0 . My system has root user, one normal user and both are me only. I am using only 'user account' only.I used to install softwares from 'user account' by using YAST.
Now my problem is - when i am trying install a rmp file through YAST, it ask root password by a dailog window. when i entered the root password it is giving error
Quote:
The program 'SU' not found. </br>Make sure your path
I had attched a screen captured image of that window.
And then after i had to be ignore that message. Installation just starts and then gives error, installation fails. so now i am not able to install any softwares through YAST !
I've spent hours trying to scan + shrink a multipage PDF documentlosing readability. This is the first time I've ever needed to do this! (I had to scan each page as ".jpg" in order to email and open on another computer, so I could not scan to PDF directly, which I think is why each page was so large; lower DPIs made the text too blurry.)I found this great tip on UbuntuGeek...but anyone can do this if GhostScript is installed:
View 1 Replies View RelatedI have a requirement to print images (two to be precise) from the command line of a given size and without losing too much quality.
So, I may have two images, a.jpg and b.jpg which may be 4x4" and 6x4" respectively (the sizes may vary). I need to be able to print both these on a single sheet of paper (one under the other) at a given size for each - so a may be 2x2" and b may be 3x2" - the aspect ratio will always be maintained (or as near as possible!)
I am currently doing this a very messy way (because I don't know any other way!!) - basically I am converting the picture to a given size using a set density using convert and then concatenating the two using montage.
Here is part of my script:
Code:
Don't worry too much about the case statement at the end - that is just to be able to select to print either A, B or A and B.
The issue with this is that is doesn't work great if the aspect ratio is not maintained perfectly and also, it loses quite a lot of quality on the print.
I have a very old windows app which I wrote years back in VB (o dear! ) which does the same thing and the quality is fine (I am running it through wine). I want it to be command line though because I want to run it as part of other scripts etc.
I am unable to locate ftp binary on SuSE 10. Some one know the location of the binary / package which has this binary.
View 2 Replies View RelatedI have reinstalled Suse 10.1 as dual-boot with Windows XP. I am now unable to get a program to run from the Linux command line. I am familiar with the program and have had it running previously when the machine was Linux-only. Everything else, e.g.Firefox and Office, work fine in Suse.
[Code]...
The problem occurs with all commands - not just this one. isis3Startup.sh is in green on the screen so I assume I should be able to run it - I have never had any problem when it was installed previously.
if its possible to change font size or style on CLI.
View 9 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedwell, gonna straight-explain what I`ve here: had a Win7 64bit installed machine and created a D drive as I was intended to install Suse there (so it`s `Extended`) after succesfully installed SLED and finally restarted the laptop to see use Win7 again there was no Loader for me to choose which Operation System (I have another machine with XP,Ubuntu and Pardus - never had sucha problem)then I had to chose SLED of course but this time it didn`t bring me to the login page but to the Command Line of SLED, and the thing is that I can`t use command line on linux. tried several times and with failsafe login but stıll having command line and there is no Win7 to run on Loader.
View 9 Replies View RelatedI have installed opensuse on VirutalBox , during installation I said "yes" to autologin as normal user.After installation and restart , it shows follwing message "Logging in Laks ...Cannot enter home directory . using /"I can login as single user by passing "single " in grub.
View 9 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
